MIC68400-1.8YML-TR (QFN-16(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC68400-1.8YML-TR

MICROCHIPQFN-16(4x4) · 17 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC68400-1.8YML-TR (QFN-16(4x4))1V IN2V IN3DELAY4RC5EN6NC7GND8GND9POR17EP16V IN15V IN14NC13V OUT12V OUT11V OUT10SNSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=4.00mm · Pitch e=0.65mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
2V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
3DELAYI/OMultiplexed I/O & Peripheral Pin DELAY (General)
4RCI/OMultiplexed I/O & Peripheral Pin RC (General)
5ENISystem Enable & Hardware Reset (EN)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7GNDGNDGround Reference Pin (GND)
8GNDGNDGround Reference Pin (GND)
9PORI/OMultiplexed I/O & Peripheral Pin POR (CAN)
10SNSI/OMultiplexed I/O & Peripheral Pin SNS (General)
11V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
12V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
13V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
14NCI/OMultiplexed I/O & Peripheral Pin NC (General)
15V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
16V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 V IN
I/O
Multiplexed I/O & Peripheral Pin V IN (General)
Design note: Input: Input voltage supply pin. Place a capacitor to ground to bypass the input supply.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC68400-1.8YML-TR (QFN-16(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC68400-1.8YML-TR (QFN-16(4x4)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC68400-1.8YML-TR (QFN-16(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC68400-1.8YML-TR (QFN-16(4x4)) - 4. Package Dimensions (D×E×A)
QFN-16(4x4) · 4.00×4.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC68400-1.8YML-TR (QFN-16(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC68400-1.8YML-TR (QFN-16(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for MIC68400
P1 · p01_fig01377×200px
MIC68400-1.8YML-TR (QFN-16(4x4)) — 4A Sequencing LDO with Tracking and Ramp Control
4A Sequencing LDO with Tracking and Ramp Control
P2 · p02_fig011777×1081px
MIC68400-1.8YML-TR (QFN-16(4x4)) — Typical Application Circuits
Typical Application Circuits
P2 · p02_fig021131×1248px
MIC68400-1.8YML-TR (QFN-16(4x4)) — Typical Application Circuits
Typical Application Circuits
P2 · p02_fig01P2
MIC68400-1.8YML-TR (QFN-16(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig011099×1195px
MIC68400-1.8YML-TR (QFN-16(4x4)) — Typical Application Circuits (Continued)
Typical Application Circuits (Continued)
P3 · p03_fig021777×1146px
MIC68400-1.8YML-TR (QFN-16(4x4)) — Functional Block Diagram
Functional Block Diagram
P11 · p11_fig01867×629px
MIC68400-1.8YML-TR (QFN-16(4x4)) — FIGURE 4-1: Enable Connections for Logic-Driven Input.
FIGURE 4-1: Enable Connections for Logic-Driven Input.
P11 · p11_fig021777×638px
MIC68400-1.8YML-TR (QFN-16(4x4)) — FIGURE 4-1: Enable Connections for Logic-Driven Input.
FIGURE 4-1: Enable Connections for Logic-Driven Input.
P16 · p16_fig011568×2166px
MIC68400-1.8YML-TR (QFN-16(4x4)) — MIC68400 | 5.0 PACKAGING INFORMATION | 5.1 Package Marking Information | Example | X.XXXX XXXXX- | 16-Lead QFN* (Fixed) | Example 16-Lead QFN* (Adjustable) | WNNN | 1.2YML 68400- | 6026 | XXX XXXXX | WNNN | YML 68400 | 2943 | ●, ▲, ▼Pin one
MIC68400 | 5.0 PACKAGING INFORMATION | 5.1 Package Marking Information | Example | X.XXXX XXXXX- | 16-Lead QFN* (Fixed) | Example 16-Lead QFN* (Adjustable) | WNNN | 1.2YML 68400- | 6026 | XXX XXXXX | WNNN | YML 68400 | 2943 | ●, ▲, ▼Pin one
P16 · p16_fig01P16
MIC68400-1.8YML-TR (QFN-16(4x4)) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
P17 · p17_fig011662×1757px
MIC68400-1.8YML-TR (QFN-16(4x4)) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P17 · p17_fig01P17
MIC68400-1.8YML-TR (QFN-16(4x4)) — Datasheet Page 17 (p17_fig01)
Datasheet Page 17 (p17_fig01)
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (MIC68400-1.8YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC68400-1.8YML-TR (QFN-16(4x4)) is a 16-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.85 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.65V to 5.5V supply operation across 40°C to +125°C with integrated CAN interfaces.
Operating Supply VoltageV_CC / V_DD
1.65V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-16(4x4))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×2.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC68400 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-16(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.65mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-16(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC68400-1.8YML-TR (QFN-16(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC68400-1.8YML-TR (QFN-16(4x4))?

Manufactured by MICROCHIP, the MIC68400-1.8YML-TR is housed in a QFN-16(4x4) package with 17 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.65V to 5.5V. Key pins include: 1 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)), 2 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)), 3 (DELAY: Multiplexed I/O & Peripheral Pin DELAY (General)), 4 (RC: Multiplexed I/O & Peripheral Pin RC (General)), 5 (EN: System Enable & Hardware Reset (EN)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC68400-1.8YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC68400-1.8YML-TR (QFN-16(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.65 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 2.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC68400-1.8YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC68400-1.8YML-TR (MICROCHIP, QFN-16(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & MIC68400 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V INDigital_IOSignal terminal V IN (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
2V INDigital_IOSignal terminal V IN (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
3DELAYDigital_IOSignal terminal DELAY (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: DELAY. Supported peripheral buses: General.
4RCDigital_IOSignal terminal RC (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: RC. Supported peripheral buses: General.
5ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
6NCNCSignal terminal NC (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9POROpen_DrainSignal terminal POR (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: POR. Supported peripheral buses: CAN.
10SNSDigital_IOSignal terminal SNS (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: SNS. Supported peripheral buses: General.
11V OUTDigital_IOSignal terminal V OUT (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
12V OUTDigital_IOSignal terminal V OUT (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
13V OUTDigital_IOSignal terminal V OUT (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
14NCNCSignal terminal NC (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
15V INDigital_IOSignal terminal V IN (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
16V INDigital_IOSignal terminal V IN (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.