MIC5356-G4YMME-TR (MSOP-8-EP) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5356-G4YMME-TR

MICROCHIPMSOP-8-EP · 9 Pins · Pitch 1.27mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5356-G4YMME-TR (MSOP-8-EP)1VIN2GND3NC4EN25EN19EP8VOUT17VOUT26NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VINPowerPower Supply Input (VIN — 2.5V to 5.5V)
2GNDGNDGround Reference Pin (GND)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4EN2I/OMultiplexed I/O & Peripheral Pin EN2 (General)
5EN1I/OMultiplexed I/O & Peripheral Pin EN1 (General)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7VOUT2PowerPower Supply Input (VOUT2 — 2.5V to 5.5V)
8VOUT1PowerPower Supply Input (VOUT1 — 2.5V to 5.5V)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VIN
Power
Power Supply Input (VIN — 2.5V to 5.5V)
Design note: Supply Input.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5356-G4YMME-TR (MSOP-8-EP) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5356-G4YMME-TR (MSOP-8-EP) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5356-G4YMME-TR (MSOP-8-EP) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5356-G4YMME-TR (MSOP-8-EP) - 4. Package Dimensions (D×E×A)
MSOP-8-EP · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5356-G4YMME-TR (MSOP-8-EP) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5356-G4YMME-TR (MSOP-8-EP) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for MIC5356
P1 · p01_fig011523×446px
MIC5356-G4YMME-TR (MSOP-8-EP) — Typical Application
Typical Application
P2 · p02_fig01597×307px
MIC5356-G4YMME-TR (MSOP-8-EP) — 8-Pin ePad MSOP (MME) 8-Pin ePad 3mm x 3mm MLF® (ML)
8-Pin ePad MSOP (MME) 8-Pin ePad 3mm x 3mm MLF® (ML)
P2 · p02_fig02597×307px
MIC5356-G4YMME-TR (MSOP-8-EP) — 8-Pin ePad MSOP (MME) 8-Pin ePad 3mm x 3mm MLF® (ML)
8-Pin ePad MSOP (MME) 8-Pin ePad 3mm x 3mm MLF® (ML)
P2 · p02_fig01P2
MIC5356-G4YMME-TR (MSOP-8-EP) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P11 · p11_fig011506×617px
MIC5356-G4YMME-TR (MSOP-8-EP) — Typical Application Schematic
Typical Application Schematic
P11 · p11_fig01P11
MIC5356-G4YMME-TR (MSOP-8-EP) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P12 · p12_fig011506×617px
MIC5356-G4YMME-TR (MSOP-8-EP) — Typical Application Schematic (Continued)
Typical Application Schematic (Continued)
P13 · p13_fig011082×926px
MIC5356-G4YMME-TR (MSOP-8-EP) — PCB Layout Recommendations (MME Package)
PCB Layout Recommendations (MME Package)
P13 · p13_fig021090×911px
MIC5356-G4YMME-TR (MSOP-8-EP) — Top Layer
Top Layer
P14 · p14_fig011158×954px
MIC5356-G4YMME-TR (MSOP-8-EP) — PCB Layout Recommendations (ML Package)
PCB Layout Recommendations (ML Package)
P14 · p14_fig01P14
MIC5356-G4YMME-TR (MSOP-8-EP) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P15 · p15_fig011500×1082px
MIC5356-G4YMME-TR (MSOP-8-EP) — Package Information
Package Information
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (MIC5356-G4YMME-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5356-G4YMME-TR (MSOP-8-EP) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.10 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.5V to 5.5V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
70μA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.10 mm (A1=0.05 mm)
Package family: TSSOP (MSOP-8-EP)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×3.10mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8-EP)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8-EP
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5356-G4YMME-TR (MSOP-8-EP)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5356-G4YMME-TR (MSOP-8-EP)?

Manufactured by MICROCHIP, the MIC5356-G4YMME-TR is housed in a MSOP-8-EP package with 9 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (VIN: Power Supply Input (VIN — 2.5V to 5.5V)), 2 (GND: Ground Reference Pin (GND)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (EN2: Multiplexed I/O & Peripheral Pin EN2 (General)), 5 (EN1: Multiplexed I/O & Peripheral Pin EN1 (General)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC5356-G4YMME-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5356-G4YMME-TR (MSOP-8-EP) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 3.10 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5356-G4YMME-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5356-G4YMME-TR (MICROCHIP, MSOP-8-EP) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MIC5356 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VINPower_InPrimary positive power supply input (VIN) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4EN2Digital_IOSignal terminal EN2 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: EN2. Supported peripheral buses: General.
5EN1Digital_IOSignal terminal EN1 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: EN1. Supported peripheral buses: General.
6NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7VOUT2Power_InPrimary positive power supply input (VOUT2) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
8VOUT1Power_InPrimary positive power supply input (VOUT1) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.