MIC5249-2.85YMM-TR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5249-2.85YMM-TR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5249-2.85YMM-TR (MSOP-8)1CBYP2DELAY3GND4VIN8ENABLE7RESET6NC5VOUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CBYPI/OMultiplexed I/O & Peripheral Pin CBYP (General)
2DELAYI/OMultiplexed I/O & Peripheral Pin DELAY (General)
3GNDGNDGround Reference Pin (GND)
4VINPowerPower Supply Input (VIN — 1V to 6V)
5VOUTPowerRegulated Power Output (VOUT — 1V to 6V)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7RESETISystem Enable & Hardware Reset (RESET)
8ENABLEI/OMultiplexed I/O & Peripheral Pin ENABLE (General)
PIN 1 CBYP
I/O
Multiplexed I/O & Peripheral Pin CBYP (General)
Design note: Reference Bypass. Connect external 0.01µF capacitor to GND to reduce output noise. May be left open.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 4 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5249-2.85YMM-TR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5249-2.85YMM-TR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5249-2.85YMM-TR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5249-2.85YMM-TR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5249-2.85YMM-TR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5249-2.85YMM-TR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (4 figures · Page 1/1)
Showing 1–4 of 4 uncropped original figures for MIC5249
P2 · p02_fig01EXACT PACKAGE
MIC5249-2.85YMM-TR (MSOP-8) — 8-pin MSOP (MM) Pin Description
8-pin MSOP (MM) Pin Description
P7 · p07_fig01EXACT PACKAGE
MIC5249-2.85YMM-TR (MSOP-8) — Package Information
Package Information
P1 · p01_fig011134×601px
MIC5249-2.85YMM-TR (MSOP-8) — Ultra-Low Noise Application
Ultra-Low Noise Application
P2 · p02_fig01P2
MIC5249-2.85YMM-TR (MSOP-8) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)

Technical Specifications & Part Details (MIC5249-2.85YMM-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5249-2.85YMM-TR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1V to 6V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1V to 6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
85µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5249-2.85YMM-TR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5249-2.85YMM-TR (MSOP-8)?

Manufactured by MICROCHIP, the MIC5249-2.85YMM-TR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1V to 6V. Key pins include: 1 (CBYP: Multiplexed I/O & Peripheral Pin CBYP (General)), 2 (DELAY: Multiplexed I/O & Peripheral Pin DELAY (General)), 3 (GND: Ground Reference Pin (GND)), 4 (VIN: Power Supply Input (VIN — 1V to 6V)), 5 (VOUT: Regulated Power Output (VOUT — 1V to 6V)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC5249-2.85YMM-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5249-2.85YMM-TR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5249-2.85YMM-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5249-2.85YMM-TR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MIC5249 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CBYPDigital_IOSignal terminal CBYP (I/O, 1V to 6V domain). Multiplexed alternate functions: CBYP. Supported peripheral buses: General.
2DELAYDigital_IOSignal terminal DELAY (I/O, 1V to 6V domain). Multiplexed alternate functions: DELAY. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4VINPower_InPrimary positive power supply input (VIN) operating in the 1V to 6V domain (Max rating: 6.0V).
5VOUTPower_OutRegulated power output rail (VOUT) operating in the 1V to 6V domain (Max rating: 6.0V).
6NCNCSignal terminal NC (I/O, 1V to 6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
8ENABLEDigital_IOSignal terminal ENABLE (I/O, 1V to 6V domain). Multiplexed alternate functions: ENABLE. Supported peripheral buses: General.