MIC5209-3.0BS (SOT-223-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5209-3.0BS

MICROCHIPSOT-223-3 · 4 Pins · Pitch 2.30mmPURE PDF IPC73515.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5209-3.0BS (SOT-223-3)1IN2GND4P43OUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
1234E=6.50mm · Pitch e=2.30mmD=3.50mm-5-4-3-2-10123456543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 6.50mm × 3.50mm · Pitch: 2.30mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (4/4)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1INI/OMultiplexed I/O & Peripheral Pin IN (General)
2GNDGNDGround Reference Pin (GND)
3OUTPowerRegulated Power Output (OUT — 1.8V to 15V)
4P4I/OMultiplexed I/O & Peripheral Pin P4 (General)
PIN 1 IN
I/O
Multiplexed I/O & Peripheral Pin IN (General)
Design note: Supply Input.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 22 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5209-3.0BS (SOT-223-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5209-3.0BS (SOT-223-3) - 2. Standard Pinout (Top View)
True package pinout (4 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5209-3.0BS (SOT-223-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5209-3.0BS (SOT-223-3) - 4. Package Dimensions (D×E×A)
SOT-223-3 · 6.50×3.50mm · Pitch 2.30mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5209-3.0BS (SOT-223-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (4 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5209-3.0BS (SOT-223-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (22 figures · Page 1/2)
Showing 1–12 of 22 uncropped original figures for MIC5209
P2 · p02_fig01EXACT PACKAGE
MIC5209-3.0BS (SOT-223-3) — MIC5209-X.XYM SOIC-8 (M) FIXED VOLTAGES (TOP VIEW)
MIC5209-X.XYM SOIC-8 (M) FIXED VOLTAGES (TOP VIEW)
P16 · p16_fig01EXACT PACKAGE
MIC5209-3.0BS (SOT-223-3) — MIC5209
MIC5209
P17 · p17_fig01EXACT PACKAGE
MIC5209-3.0BS (SOT-223-3) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P1 · p01_fig01376×200px
MIC5209-3.0BS (SOT-223-3) — 500 mA Low-Noise LDO Regulator
500 mA Low-Noise LDO Regulator
P1 · p01_fig02583×460px
MIC5209-3.0BS (SOT-223-3) — Typical Application Circuits
Typical Application Circuits
P1 · p01_fig03737×449px
MIC5209-3.0BS (SOT-223-3) — 3.3V NOMINAL INPUT SLOT 1 POWER SUPPLY ULTRA-LOW NOISE 5V REGULATOR
3.3V NOMINAL INPUT SLOT 1 POWER SUPPLY ULTRA-LOW NOISE 5V REGULATOR
P2 · p02_fig04541×485px
MIC5209-3.0BS (SOT-223-3) — MIC5209YU DDPAK (U) ADJUSTABLE VOLTAGES (TOP VIEW)
MIC5209YU DDPAK (U) ADJUSTABLE VOLTAGES (TOP VIEW)
P2 · p02_fig05582×483px
MIC5209-3.0BS (SOT-223-3) — MIC5209YU DDPAK (U) ADJUSTABLE VOLTAGES (TOP VIEW) | 5 ADJ 4 OUT 3 GND 2 IN 1 EN | D N G | B A TA
MIC5209YU DDPAK (U) ADJUSTABLE VOLTAGES (TOP VIEW) | 5 ADJ 4 OUT 3 GND 2 IN 1 EN | D N G | B A TA
P13 · p13_fig011777×1442px
MIC5209-3.0BS (SOT-223-3) — FIGURE 4-2: Ultra-Low-Noise Fixed-Voltage Application.
FIGURE 4-2: Ultra-Low-Noise Fixed-Voltage Application.
P14 · p14_fig011777×1093px
MIC5209-3.0BS (SOT-223-3) — FIGURE 4-5: Slot-1 Power Supply.
FIGURE 4-5: Slot-1 Power Supply.
P14 · p14_fig021778×777px
MIC5209-3.0BS (SOT-223-3) — DS20005720B-page 14  2017 - 2022 Microchip Technology Inc. and its subsidiaries
DS20005720B-page 14  2017 - 2022 Microchip Technology Inc. and its subsidiaries
P14 · p14_fig01P14
MIC5209-3.0BS (SOT-223-3) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
Page 1 / 2 (22 extracted figures)

Technical Specifications & Part Details (MIC5209-3.0BS)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Low-Dropout Linear Voltage Regulator (LDO)
Detailed Overview:MIC5209-3.0BS (SOT-223-3) is a 4-pin low-dropout linear voltage regulator (ldo) featuring a 6.50 × 3.50 × 1.80 mm mechanical envelope (lead pitch e = 2.30 mm). Rated for 1.8V to 15V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 15V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.50 × 3.50 × 1.80 mm (A1=0.06 mm)
Package family: SOT223 (SOT-223-3)
Pin Count & Lead PitchN / e
4 Pins | Pitch e = 2.30 mm (90.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol4 auto-grouped pins
OK
IPC-7351B Land Pattern4 pads · Pitch 2.30mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC5209 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOT-223-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.50 × 3.50 mm
Height (A) & Pitch (e)IPC-7351B
A=1.80mm · e=2.30mm
Pad Size (W × L)Level B
0.95 × 2.00 mm
Pins / Total PadsTopology
4P / 4Pad (SOT_TAB)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOT-223-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5209-3.0BS (SOT-223-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5209-3.0BS (SOT-223-3)?

Manufactured by MICROCHIP, the MIC5209-3.0BS is housed in a SOT-223-3 package with 4 pins and a 2.30 mm lead pitch, supporting a VCC supply range of 1.8V to 15V. Key pins include: 1 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 2 (GND: Ground Reference Pin (GND)), 3 (OUT: Regulated Power Output (OUT — 1.8V to 15V)), 4 (P4: Multiplexed I/O & Peripheral Pin P4 (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC5209-3.0BS?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5209-3.0BS (SOT-223-3) has a nominal body envelope of 3.50 × 6.50 mm, pitch e = 2.30 mm, and 4 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5209-3.0BS?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5209-3.0BS (MICROCHIP, SOT-223-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (4 pins) & MIC5209 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1INDigital_IOSignal terminal IN (I/O, 1.8V to 15V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3OUTPower_OutRegulated power output rail (OUT) operating in the 1.8V to 15V domain (Max rating: 15.0V).
4P4Digital_IOSignal terminal P4 (I/O, 1.8V to 15V domain). Multiplexed alternate functions: P4. Supported peripheral buses: General.