MIC4782YML-TR (MLF-16) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC4782YML-TR

MICROCHIPMLF-16 · 17 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC4782YML-TR (MLF-16)1FB22EN23SW24SW25PGND26VIN27VIN18PGND19SW117EP16BIAS15VIN214VIN113SGND12FB111EN110SW1Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1716151413121110987654321E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1FB2I/OMultiplexed I/O & Peripheral Pin FB2 (General)
2EN2I/OMultiplexed I/O & Peripheral Pin EN2 (General)
3SW2I/OMultiplexed I/O & Peripheral Pin SW2 (General)
4SW2I/OMultiplexed I/O & Peripheral Pin SW2 (General)
5PGND2GNDGround Reference Pin (PGND2)
6VIN2PowerRegulated Power Output (VIN2 — 3.0V to 6.0V)
7VIN1PowerRegulated Power Output (VIN1 — 3.0V to 6.0V)
8PGND1GNDGround Reference Pin (PGND1)
9SW1I/OMultiplexed I/O & Peripheral Pin SW1 (General)
10SW1I/OMultiplexed I/O & Peripheral Pin SW1 (General)
11EN1I/OMultiplexed I/O & Peripheral Pin EN1 (General)
12FB1I/OMultiplexed I/O & Peripheral Pin FB1 (General)
13SGNDGNDGround Reference Pin (SGND)
14VIN1PowerRegulated Power Output (VIN1 — 3.0V to 6.0V)
15VIN2PowerRegulated Power Output (VIN2 — 3.0V to 6.0V)
16BIASI/OMultiplexed I/O & Peripheral Pin BIAS (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 FB2
I/O
Multiplexed I/O & Peripheral Pin FB2 (General)
Design note: Feedback for output 2 (Input). Input to the error amplifier, connect to the external resistor divider network to set the output voltage.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC4782YML-TR (MLF-16) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC4782YML-TR (MLF-16) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC4782YML-TR (MLF-16) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC4782YML-TR (MLF-16) - 4. Package Dimensions (D×E×A)
MLF-16 · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC4782YML-TR (MLF-16) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC4782YML-TR (MLF-16) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for MIC4782
P2 · p02_fig01EXACT PACKAGE
MIC4782YML-TR (MLF-16) — 16-Pin 3mm x 3mm MLF® (YML)
16-Pin 3mm x 3mm MLF® (YML)
P23 · p23_fig01EXACT PACKAGE
MIC4782YML-TR (MLF-16) — 16-Pin 3mm x 3mm MLF® (ML)
16-Pin 3mm x 3mm MLF® (ML)
P1 · p01_fig01624×624px
MIC4782YML-TR (MLF-16) — MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
P1 · p01_fig021155×532px
MIC4782YML-TR (MLF-16) — Typical Application
Typical Application
P1 · p01_fig02P1
MIC4782YML-TR (MLF-16) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)

Technical Specifications & Part Details (MIC4782YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC4782YML-TR (MLF-16) is a 16-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3.0V to 6.0V supply operation across 20°C to +125°C with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 6.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
20°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1.8 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (MLF-16)
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.60×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MLF-16)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MLF-16
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC4782YML-TR (MLF-16)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC4782YML-TR (MLF-16)?

Manufactured by MICROCHIP, the MIC4782YML-TR is housed in a MLF-16 package with 17 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3.0V to 6.0V. Key pins include: 1 (FB2: Multiplexed I/O & Peripheral Pin FB2 (General)), 2 (EN2: Multiplexed I/O & Peripheral Pin EN2 (General)), 3 (SW2: Multiplexed I/O & Peripheral Pin SW2 (General)), 4 (SW2: Multiplexed I/O & Peripheral Pin SW2 (General)), 5 (PGND2: Ground Reference Pin (PGND2)), 6 (VIN2: Regulated Power Output (VIN2 — 3.0V to 6.0V)).

What are the IPC-7351B PCB Footprint dimensions for MIC4782YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC4782YML-TR (MLF-16) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.60 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC4782YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC4782YML-TR (MICROCHIP, MLF-16) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & MIC4782 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1FB2Digital_IOSignal terminal FB2 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: FB2. Supported peripheral buses: General.
2EN2Digital_IOSignal terminal EN2 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: EN2. Supported peripheral buses: General.
3SW2Digital_IOSignal terminal SW2 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: SW2. Supported peripheral buses: General.
4SW2Digital_IOSignal terminal SW2 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: SW2. Supported peripheral buses: General.
5PGND2GND0V electrical ground return terminal (PGND2) for internal core logic, I/O drivers, and analog sub-blocks.
6VIN2Power_OutRegulated power output rail (VIN2) operating in the 3.0V to 6.0V domain (Max rating: 6.0V).
7VIN1Power_OutRegulated power output rail (VIN1) operating in the 3.0V to 6.0V domain (Max rating: 6.0V).
8PGND1GND0V electrical ground return terminal (PGND1) for internal core logic, I/O drivers, and analog sub-blocks.
9SW1Digital_IOSignal terminal SW1 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: SW1. Supported peripheral buses: General.
10SW1Digital_IOSignal terminal SW1 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: SW1. Supported peripheral buses: General.
11EN1Digital_IOSignal terminal EN1 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: EN1. Supported peripheral buses: General.
12FB1Digital_IOSignal terminal FB1 (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: FB1. Supported peripheral buses: General.
13SGNDGND0V electrical ground return terminal (SGND) for internal core logic, I/O drivers, and analog sub-blocks.
14VIN1Power_OutRegulated power output rail (VIN1) operating in the 3.0V to 6.0V domain (Max rating: 6.0V).
15VIN2Power_OutRegulated power output rail (VIN2) operating in the 3.0V to 6.0V domain (Max rating: 6.0V).
16BIASDigital_IOSignal terminal BIAS (I/O, 3.0V to 6.0V domain). Multiplexed alternate functions: BIAS. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.