MIC4428YN (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC4428YN

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC4428YN (PDIP-8)1NC2INA3GND4INB8NC7OUTA6VS5OUTBGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=6.35mm · Pitch e=2.54mmD=9.62mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 6.35mm × 9.62mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2INAI/OMultiplexed I/O & Peripheral Pin INA (General)
3GNDGNDGround Reference Pin (GND)
4INBI/OMultiplexed I/O & Peripheral Pin INB (General)
5OUTBI/OMultiplexed I/O & Peripheral Pin OUTB (General)
6VSI/OMultiplexed I/O & Peripheral Pin VS (General)
7OUTAI/OMultiplexed I/O & Peripheral Pin OUTA (General)
8NCI/OMultiplexed I/O & Peripheral Pin NC (General)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: Not internally connected.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC4428YN (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC4428YN (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC4428YN (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC4428YN (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 6.35×9.62mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC4428YN (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC4428YN (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for MIC4428 / MIC4426
P1 · p01_fig02EXACT PACKAGE
MIC4428YN (PDIP-8) — • MOSFET Driver • Clock Line Driver • Coax Cable Driver • Piezoelectric Transducer Driver
• MOSFET Driver • Clock Line Driver • Coax Cable Driver • Piezoelectric Transducer Driver
P10 · p10_fig01EXACT PACKAGE
MIC4428YN (PDIP-8) — MIC4426/7/8 MIC4426 MIC4427 MIC4428
MIC4426/7/8 MIC4426 MIC4427 MIC4428
P12 · p12_fig01EXACT PACKAGE
MIC4428YN (PDIP-8) — 8-Lead PDIP Package Outline and Recommended Land Pattern
8-Lead PDIP Package Outline and Recommended Land Pattern
P1 · p01_fig01376×200px
MIC4428YN (PDIP-8) — Dual 1.5A-Peak Low-Side MOSFET Drivers
Dual 1.5A-Peak Low-Side MOSFET Drivers
P2 · p02_fig011775×1184px
MIC4428YN (PDIP-8) — Functional Block Diagram
Functional Block Diagram
P10 · p10_fig01P10
MIC4428YN (PDIP-8) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)
P11 · p11_fig011669×1766px
MIC4428YN (PDIP-8) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P13 · p13_fig01All Packages in PDF
MIC4428YN (PDIP-8) — 8-Lead MSOP Package Outline and Recommended Land Pattern
8-Lead MSOP Package Outline and Recommended Land Pattern

Technical Specifications & Part Details (MIC4428YN)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC4428YN (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 9.62 × 6.35 × 4.20 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 4.5V to 18V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 18V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
9.62 × 6.35 × 4.20 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC4428 / MIC4426 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
9.62 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.20mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC4428YN (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC4428YN (PDIP-8)?

Manufactured by MICROCHIP, the MIC4428YN is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 4.5V to 18V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (INA: Multiplexed I/O & Peripheral Pin INA (General)), 3 (GND: Ground Reference Pin (GND)), 4 (INB: Multiplexed I/O & Peripheral Pin INB (General)), 5 (OUTB: Multiplexed I/O & Peripheral Pin OUTB (General)), 6 (VS: Multiplexed I/O & Peripheral Pin VS (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC4428YN?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC4428YN (PDIP-8) has a nominal body envelope of 6.35 × 9.62 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC4428YN?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC4428YN (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MIC4428 / MIC4426 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 4.5V to 18V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2INADigital_IOSignal terminal INA (I/O, 4.5V to 18V domain). Multiplexed alternate functions: INA. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4INBDigital_IOSignal terminal INB (I/O, 4.5V to 18V domain). Multiplexed alternate functions: INB. Supported peripheral buses: General.
5OUTBDigital_IOSignal terminal OUTB (I/O, 4.5V to 18V domain). Multiplexed alternate functions: OUTB. Supported peripheral buses: General.
6VSDigital_IOSignal terminal VS (I/O, 4.5V to 18V domain). Multiplexed alternate functions: VS. Supported peripheral buses: General.
7OUTADigital_IOSignal terminal OUTA (I/O, 4.5V to 18V domain). Multiplexed alternate functions: OUTA. Supported peripheral buses: General.
8NCNCSignal terminal NC (I/O, 4.5V to 18V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.