MIC4422CT (TO-220-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC4422CT

MICROCHIPTO-220-5 · 5 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC4422CT (TO-220-5)1IN2GND3V S5OUT4GNDGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
54321E=10.20mm · Pitch e=0.50mmD=4.20mm-7-5-3-11357420-2-4mm
3. 3D CAD MODEL
Package Body: 10.20mm × 4.20mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (5/5)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1INI/OMultiplexed I/O & Peripheral Pin IN (General)
2GNDGNDGround Reference Pin (GND)
3V SI/OMultiplexed I/O & Peripheral Pin V S (General)
4GNDGNDGround Reference Pin (GND)
5OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
PIN 1 IN
I/O
Multiplexed I/O & Peripheral Pin IN (General)
Design note: Control Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC4422CT (TO-220-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC4422CT (TO-220-5) - 2. Standard Pinout (Top View)
True package pinout (5 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC4422CT (TO-220-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC4422CT (TO-220-5) - 4. Package Dimensions (D×E×A)
TO-220-5 · 10.20×4.20mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC4422CT (TO-220-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (5 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC4422CT (TO-220-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for MIC4421 / MIC4422
P2 · p02_fig01EXACT PACKAGE
MIC4422CT (TO-220-5) — 3
3
P1 · p01_fig01871×248px
MIC4422CT (TO-220-5) — MIC4421/4422 Micrel, Inc.
MIC4421/4422 Micrel, Inc.
P1 · p01_fig021388×703px
MIC4422CT (TO-220-5) — Functional Diagram
Functional Diagram
P5 · p05_fig011929×1372px
MIC4422CT (TO-220-5) — Supply Current vs. Capacitive Load
Supply Current vs. Capacitive Load
P7 · p07_fig011016×716px
MIC4422CT (TO-220-5) — Figure 3. Direct Motor Drive
Figure 3. Direct Motor Drive
P7 · p07_fig021776×690px
MIC4422CT (TO-220-5) — Figure 4. Self Contained Voltage Doubler
Figure 4. Self Contained Voltage Doubler
P12 · p12_fig011173×1978px
MIC4422CT (TO-220-5) — MIC4421/4422 Micrel, Inc.
MIC4421/4422 Micrel, Inc.
P11 · p11_fig01All Packages in PDF
MIC4422CT (TO-220-5) — MIC4421/4422 Micrel, Inc. | Package Information | 0.370 (9.40) | 0.125 (3.18) | PIN 1 | INCH (MM) | 0.018 (0.57) | 0.100 (2.54) | 0.013 (0.330) 0.010 (0.254) | 0.300 (7.62) | 0.245 (6.22) | 0.0375 (0.952) | 0.130 (3.30) | 8-Pin Plastic DIP
MIC4421/4422 Micrel, Inc. | Package Information | 0.370 (9.40) | 0.125 (3.18) | PIN 1 | INCH (MM) | 0.018 (0.57) | 0.100 (2.54) | 0.013 (0.330) 0.010 (0.254) | 0.300 (7.62) | 0.245 (6.22) | 0.0375 (0.952) | 0.130 (3.30) | 8-Pin Plastic DIP

Technical Specifications & Part Details (MIC4422CT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC4422CT (TO-220-5) is a 5-pin standard electronic & interconnect component featuring a 10.20 × 4.20 × 2.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 4.5V to 18V supply operation across 0°C to +70°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 18V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
9A
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.20 × 4.20 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (TO-220-5)
Pin Count & Lead PitchN / e
5 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol5 auto-grouped pins
OK
IPC-7351B Land Pattern5 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TO-220-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.20 × 4.20 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
5P / 5Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-220-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC4422CT (TO-220-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC4422CT (TO-220-5)?

Manufactured by MICROCHIP, the MIC4422CT is housed in a TO-220-5 package with 5 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 4.5V to 18V. Key pins include: 1 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 2 (GND: Ground Reference Pin (GND)), 3 (V S: Multiplexed I/O & Peripheral Pin V S (General)), 4 (GND: Ground Reference Pin (GND)), 5 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC4422CT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC4422CT (TO-220-5) has a nominal body envelope of 4.20 × 10.20 mm, pitch e = 0.50 mm, and 5 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC4422CT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC4422CT (MICROCHIP, TO-220-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (5 pins) & MIC4421 / MIC4422 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1INDigital_IOSignal terminal IN (I/O, 4.5V to 18V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3V SDigital_IOSignal terminal V S (I/O, 4.5V to 18V domain). Multiplexed alternate functions: V S. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5OUTDigital_IOSignal terminal OUT (I/O, 4.5V to 18V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.