MIC3385YHL-TR (MLF-14) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC3385YHL-TR

MICROCHIPMLF-14 · 15 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC3385YHL-TR (MLF-14)1FB2VIN3LOWQ4EN5OUT6OUT7OUT8SW15EP14BIAS13LDO12AVIN11GND10SW9SWGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
123456891112131415107710E=3.50mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.50mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (15/15)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1FBI/OMultiplexed I/O & Peripheral Pin FB (General)
2VINPowerPower Supply Input (VIN — 2.7V to 5.5V)
3LOWQI/OMultiplexed I/O & Peripheral Pin LOWQ (PWM)
4ENISystem Enable & Hardware Reset (EN)
5OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
6OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
7OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
8SWI/OMultiplexed I/O & Peripheral Pin SW (General)
9SWI/OMultiplexed I/O & Peripheral Pin SW (General)
10SWI/OMultiplexed I/O & Peripheral Pin SW (General)
11GNDGNDGround Reference Pin (GND)
12AVINPowerPower Supply Input (AVIN — 2.7V to 5.5V)
13LDOI/OMultiplexed I/O & Peripheral Pin LDO (General)
14BIASI/OMultiplexed I/O & Peripheral Pin BIAS (General)
15EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 FB
I/O
Multiplexed I/O & Peripheral Pin FB (General)
Design note: Feedback. Input to the error amplifier. Connect to the external resistor divider network to set the output voltage.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC3385YHL-TR (MLF-14) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC3385YHL-TR (MLF-14) - 2. Standard Pinout (Top View)
True package pinout (15 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC3385YHL-TR (MLF-14) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC3385YHL-TR (MLF-14) - 4. Package Dimensions (D×E×A)
MLF-14 · 3.50×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC3385YHL-TR (MLF-14) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC3385YHL-TR (MLF-14) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for MIC3385
P2 · p02_fig011837×594px
MIC3385YHL-TR (MLF-14) — Typical Application
Typical Application
P2 · p02_fig01P2
MIC3385YHL-TR (MLF-14) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig01611×492px
MIC3385YHL-TR (MLF-14) — Micrel, Inc. MIC3385
Micrel, Inc. MIC3385
P3 · p03_fig01P3
MIC3385YHL-TR (MLF-14) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P15 · p15_fig011884×1213px
MIC3385YHL-TR (MLF-14) — Micrel, Inc. MIC3385
Micrel, Inc. MIC3385
P15 · p15_fig022038×644px
MIC3385YHL-TR (MLF-14) — September 22, 2015 15 Revision 3.0 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | indemnify Micrel for any damages resulting from such use or sale. | © 2006
September 22, 2015 15 Revision 3.0 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | indemnify Micrel for any damages resulting from such use or sale. | © 2006

Technical Specifications & Part Details (MIC3385YHL-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC3385YHL-TR (MLF-14) is a 14-pin standard electronic & interconnect component featuring a 3.50 × 3.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.7V to 5.5V supply operation across 40°C to +125°C with integrated USB, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
8MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
600mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.50 × 3.00 × 1.00 mm (A1=0.02 mm)
Package family: OTHER (MLF-14)
Pin Count & Lead PitchN / e
14 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol15 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.25×2.58mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC3385 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (MLF-14)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.50 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.27 × 0.50 mm
Pins / Total PadsTopology
15P / 17Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MLF-14
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC3385YHL-TR (MLF-14)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC3385YHL-TR (MLF-14)?

Manufactured by MICROCHIP, the MIC3385YHL-TR is housed in a MLF-14 package with 15 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 2 (VIN: Power Supply Input (VIN — 2.7V to 5.5V)), 3 (LOWQ: Multiplexed I/O & Peripheral Pin LOWQ (PWM)), 4 (EN: System Enable & Hardware Reset (EN)), 5 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 6 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC3385YHL-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC3385YHL-TR (MLF-14) has a nominal body envelope of 3.00 × 3.50 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.25 × 2.58 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC3385YHL-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC3385YHL-TR (MICROCHIP, MLF-14) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (15 pins) & MIC3385 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1FBDigital_IOSignal terminal FB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
2VINPower_InPrimary positive power supply input (VIN) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
3LOWQDigital_IOSignal terminal LOWQ (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: LOWQ. Supported peripheral buses: PWM.
4ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
5OUTDigital_IOSignal terminal OUT (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
6OUTDigital_IOSignal terminal OUT (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
7OUTDigital_IOSignal terminal OUT (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
8SWDigital_IOSignal terminal SW (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
9SWDigital_IOSignal terminal SW (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
10SWDigital_IOSignal terminal SW (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
11GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
12AVINPower_InPrimary positive power supply input (AVIN) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
13LDODigital_IOSignal terminal LDO (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: LDO. Supported peripheral buses: General.
14BIASDigital_IOSignal terminal BIAS (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: BIAS. Supported peripheral buses: General.
15EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.