MIC2793NH-04VMT-TR (DFN-8(2x2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2793NH-04VMT-TR

MICROCHIPDFN-8(2x2) · 9 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2793NH-04VMT-TR (DFN-8(2x2))1RESET2GND3/MR4CTH5SNS9GND8RESET7/RESET6VDDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RESETISystem Enable & Hardware Reset (RESET)
2GNDGNDGround Reference Pin (GND)
3/MRI/OMultiplexed I/O & Peripheral Pin /MR (General)
4CTHI/OMultiplexed I/O & Peripheral Pin CTH (General)
5SNSI/OMultiplexed I/O & Peripheral Pin SNS (General)
6VDDPowerPower Supply Input (VDD — 1.5V to 5.5V)
7/RESETISystem Enable & Hardware Reset (/RESET)
8RESETISystem Enable & Hardware Reset (RESET)
9GNDGNDGround Reference Pin (GND)
PIN 1 RESET
I
System Enable & Hardware Reset (RESET)
Design note: Reset is an active-high push-pull output and is asserted high when /MR is set to a logic low or the SNS voltage decreases below the threshold voltage. RESET will remain high for the reset timeout delay after SNS > (V + V ) and /MR is set to
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2793NH-04VMT-TR (DFN-8(2x2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2793NH-04VMT-TR (DFN-8(2x2)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2793NH-04VMT-TR (DFN-8(2x2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2793NH-04VMT-TR (DFN-8(2x2)) - 4. Package Dimensions (D×E×A)
DFN-8(2x2) · 2.00×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2793NH-04VMT-TR (DFN-8(2x2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2793NH-04VMT-TR (DFN-8(2x2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for MIC2793
P2 · p02_fig02EXACT PACKAGE
MIC2793NH-04VMT-TR (DFN-8(2x2)) — (Top View)
(Top View)
P17 · p17_fig01EXACT PACKAGE
MIC2793NH-04VMT-TR (DFN-8(2x2)) — 8-pin 2mm × 2mm TDFN (MT)
8-pin 2mm × 2mm TDFN (MT)
P1 · p01_fig01981×412px
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Typical Application
Typical Application
P2 · p02_fig02P2
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P12 · p12_fig011652×955px
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Typical Application Schematic
Typical Application Schematic
P12 · p12_fig01P12
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Datasheet Page 12 (p12_fig01)
Datasheet Page 12 (p12_fig01)
P13 · p13_fig01721×730px
MIC2793NH-04VMT-TR (DFN-8(2x2)) — PCB Layout Recommendations
PCB Layout Recommendations
P13 · p13_fig02699×704px
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Bottom Layer
Bottom Layer
P17 · p17_fig01P17
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Datasheet Page 17 (p17_fig01)
Datasheet Page 17 (p17_fig01)
P2 · p02_fig01All Packages in PDF
MIC2793NH-04VMT-TR (DFN-8(2x2)) — Pin Configuration
Pin Configuration
P15 · p15_fig01All Packages in PDF
MIC2793NH-04VMT-TR (DFN-8(2x2)) — 6-pin 1.6mm × 1.6mm TDFN (MT)
6-pin 1.6mm × 1.6mm TDFN (MT)
P16 · p16_fig01All Packages in PDF
MIC2793NH-04VMT-TR (DFN-8(2x2)) — 6-pin 2mm × 2mm TDFN (MT)
6-pin 2mm × 2mm TDFN (MT)

Technical Specifications & Part Details (MIC2793NH-04VMT-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2793NH-04VMT-TR (DFN-8(2x2)) is a 8-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.5V to 5.5V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (DFN-8(2x2))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8(2x2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.51 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8(2x2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2793NH-04VMT-TR (DFN-8(2x2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2793NH-04VMT-TR (DFN-8(2x2))?

Manufactured by MICROCHIP, the MIC2793NH-04VMT-TR is housed in a DFN-8(2x2) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.5V to 5.5V. Key pins include: 1 (RESET: System Enable & Hardware Reset (RESET)), 2 (GND: Ground Reference Pin (GND)), 3 (/MR: Multiplexed I/O & Peripheral Pin /MR (General)), 4 (CTH: Multiplexed I/O & Peripheral Pin CTH (General)), 5 (SNS: Multiplexed I/O & Peripheral Pin SNS (General)), 6 (VDD: Power Supply Input (VDD — 1.5V to 5.5V)).

What are the IPC-7351B PCB Footprint dimensions for MIC2793NH-04VMT-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2793NH-04VMT-TR (DFN-8(2x2)) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.50 mm, and 9 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2793NH-04VMT-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2793NH-04VMT-TR (MICROCHIP, DFN-8(2x2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MIC2793 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3/MRDigital_IOSignal terminal /MR (I/O, 1.5V to 5.5V domain). Multiplexed alternate functions: /MR. Supported peripheral buses: General.
4CTHDigital_IOSignal terminal CTH (I/O, 1.5V to 5.5V domain). Multiplexed alternate functions: CTH. Supported peripheral buses: General.
5SNSDigital_IOSignal terminal SNS (I/O, 1.5V to 5.5V domain). Multiplexed alternate functions: SNS. Supported peripheral buses: General.
6VDDPower_InPrimary positive power supply input (VDD) operating in the 1.5V to 5.5V domain (Max rating: 5.5V).
7/RESETDigital_IOActive-low hardware reset terminal (/RESET): pulling this pin Low resets the processor core and peripherals.
8RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.