MIC2775-28YM5-TR (SOT-23-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2775-28YM5-TR

MICROCHIPSOT-23-5 · 5 Pins · Pitch 0.95mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2775-28YM5-TR (SOT-23-5)1/RST2GND3RST5VDD4/MRGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345E=2.90mm · Pitch e=0.95mmD=1.60mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.90mm × 1.60mm · Pitch: 0.95mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (5/5)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1/RSTI/OMultiplexed I/O & Peripheral Pin /RST (General)
2GNDGNDGround Reference Pin (GND)
3RSTI/OMultiplexed I/O & Peripheral Pin RST (General)
4/MRI/OMultiplexed I/O & Peripheral Pin /MR (General)
5VDDPowerPower Supply Input (VDD — 1.5V to 5.5V)
PIN 1 /RST
I/O
Multiplexed I/O & Peripheral Pin /RST (General)
Design note: Digital (Output): Asserted low whenever V falls below the reference voltage. It will remain DD asserted for no less than 140ms after V returns above the threshold limit. DD
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2775-28YM5-TR (SOT-23-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2775-28YM5-TR (SOT-23-5) - 2. Standard Pinout (Top View)
True package pinout (5 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2775-28YM5-TR (SOT-23-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2775-28YM5-TR (SOT-23-5) - 4. Package Dimensions (D×E×A)
SOT-23-5 · 2.90×1.60mm · Pitch 0.95mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2775-28YM5-TR (SOT-23-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (5 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2775-28YM5-TR (SOT-23-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MIC2775
P3 · p03_fig01EXACT PACKAGE
MIC2775-28YM5-TR (SOT-23-5) — SOT-23-5 (M5) (Top View)
SOT-23-5 (M5) (Top View)
P8 · p08_fig01EXACT PACKAGE
MIC2775-28YM5-TR (SOT-23-5) — SOT-23-5 (M5)
SOT-23-5 (M5)
P1 · p01_fig011190×500px
MIC2775-28YM5-TR (SOT-23-5) — Typical Application
Typical Application
P1 · p01_fig01P1
MIC2775-28YM5-TR (SOT-23-5) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig011950×739px
MIC2775-28YM5-TR (SOT-23-5) — Part Numbering Conventions
Part Numbering Conventions
P3 · p03_fig01P3
MIC2775-28YM5-TR (SOT-23-5) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P7 · p07_fig01581×596px
MIC2775-28YM5-TR (SOT-23-5) — Figure 3. Typical VDD Transient Response
Figure 3. Typical VDD Transient Response
P7 · p07_fig02883×534px
MIC2775-28YM5-TR (SOT-23-5) — Figure 1. MIC2775 Valid /RST Below 1.2V
Figure 1. MIC2775 Valid /RST Below 1.2V
P7 · p07_fig03916×550px
MIC2775-28YM5-TR (SOT-23-5) — Figure 2. MIC2775 Valid RST Below 1.2V
Figure 2. MIC2775 Valid RST Below 1.2V

Technical Specifications & Part Details (MIC2775-28YM5-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2775-28YM5-TR (SOT-23-5) is a 5-pin standard electronic & interconnect component featuring a 2.90 × 1.60 × 1.10 mm mechanical envelope (lead pitch e = 0.95 mm). Rated for 1.5V to 5.5V supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
3.5µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.90 × 1.60 × 1.10 mm (A1=0.08 mm)
Package family: SOT23 (SOT-23-5)
Pin Count & Lead PitchN / e
5 Pins | Pitch e = 0.95 mm (37.4 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol5 auto-grouped pins
OK
IPC-7351B Land Pattern5 pads · Pitch 0.95mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOT-23-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.90 × 1.60 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.95mm
Pad Size (W × L)Level B
0.60 × 1.00 mm
Pins / Total PadsTopology
5P / 5Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOT-23-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2775-28YM5-TR (SOT-23-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2775-28YM5-TR (SOT-23-5)?

Manufactured by MICROCHIP, the MIC2775-28YM5-TR is housed in a SOT-23-5 package with 5 pins and a 0.95 mm lead pitch, supporting a VCC supply range of 1.5V to 5.5V. Key pins include: 1 (/RST: Multiplexed I/O & Peripheral Pin /RST (General)), 2 (GND: Ground Reference Pin (GND)), 3 (RST: Multiplexed I/O & Peripheral Pin RST (General)), 4 (/MR: Multiplexed I/O & Peripheral Pin /MR (General)), 5 (VDD: Power Supply Input (VDD — 1.5V to 5.5V)).

What are the IPC-7351B PCB Footprint dimensions for MIC2775-28YM5-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2775-28YM5-TR (SOT-23-5) has a nominal body envelope of 1.60 × 2.90 mm, pitch e = 0.95 mm, and 5 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2775-28YM5-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2775-28YM5-TR (MICROCHIP, SOT-23-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (5 pins) & MIC2775 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1/RSTDigital_IOSignal terminal /RST (I/O, 1.5V to 5.5V domain). Multiplexed alternate functions: /RST. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3RSTDigital_IOSignal terminal RST (I/O, 1.5V to 5.5V domain). Multiplexed alternate functions: RST. Supported peripheral buses: General.
4/MRDigital_IOSignal terminal /MR (I/O, 1.5V to 5.5V domain). Multiplexed alternate functions: /MR. Supported peripheral buses: General.
5VDDPower_InPrimary positive power supply input (VDD) operating in the 1.5V to 5.5V domain (Max rating: 5.5V).