MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2214-DNYML-TR

MICROCHIPTDFN-10-EP(3x3) · 11 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2214-DNYML-TR (TDFN-10-EP(3x3))1VIN2EN3CBYP4SW5SET6GND11EP10VOUT19VOUT28POR7DRVGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1110987654321E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VINPowerPower Supply Input (VIN — 2.25V to 5.5V)
2ENISystem Enable & Hardware Reset (EN)
3CBYPI/OMultiplexed I/O & Peripheral Pin CBYP (General)
4SWI/OMultiplexed I/O & Peripheral Pin SW (General)
5SETI/OMultiplexed I/O & Peripheral Pin SET (CAN)
6GNDGNDGround Reference Pin (GND)
7DRVI/OMultiplexed I/O & Peripheral Pin DRV (General)
8PORI/OMultiplexed I/O & Peripheral Pin POR (General)
9VOUT2PowerPower Supply Input (VOUT2 — 2.25V to 5.5V)
10VOUT1PowerPower Supply Input (VOUT1 — 2.25V to 5.5V)
11EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VIN
Power
Power Supply Input (VIN — 2.25V to 5.5V)
Design note: Supply Input: (VIN1 and VIN2 are internally tied together)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) - 4. Package Dimensions (D×E×A)
TDFN-10-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MIC2214
P1 · p01_fig01870×248px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — MIC2214 Micrel, Inc. MIC2214
MIC2214 Micrel, Inc. MIC2214
P1 · p01_fig021248×714px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Typical Application
Typical Application
P1 · p01_fig02P1
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P6 · p06_fig011180×547px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Dropout Characteristics Output 1
Dropout Characteristics Output 1
P6 · p06_fig02598×577px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Dropout Characteristics Output 2
Dropout Characteristics Output 2
P6 · p06_fig031179×578px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Dropout Voltage Output 2
Dropout Voltage Output 2
P6 · p06_fig04517×577px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Ground Current vs. Supply Voltage
Ground Current vs. Supply Voltage
P6 · p06_fig05510×573px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Ground Current vs. Output 1 Current
Ground Current vs. Output 1 Current
P6 · p06_fig06510×578px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — Ground Current vs. Output 2 Current
Ground Current vs. Output 2 Current
P6 · p06_fig07489×577px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
P6 · p06_fig08480×577px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — M9999-101705 6 October 2005
M9999-101705 6 October 2005
P6 · p06_fig09496×578px
MIC2214-DNYML-TR (TDFN-10-EP(3x3)) — M9999-101705 6 October 2005
M9999-101705 6 October 2005
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MIC2214-DNYML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2214-DNYML-TR (TDFN-10-EP(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.25V to 5.5V supply operation across 40°C to +125°C with integrated CAN interfaces.
Operating Supply VoltageV_CC / V_DD
2.25V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
48µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (TDFN-10-EP(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×2.30mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TDFN-10-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-10-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2214-DNYML-TR (TDFN-10-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2214-DNYML-TR (TDFN-10-EP(3x3))?

Manufactured by MICROCHIP, the MIC2214-DNYML-TR is housed in a TDFN-10-EP(3x3) package with 11 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.25V to 5.5V. Key pins include: 1 (VIN: Power Supply Input (VIN — 2.25V to 5.5V)), 2 (EN: System Enable & Hardware Reset (EN)), 3 (CBYP: Multiplexed I/O & Peripheral Pin CBYP (General)), 4 (SW: Multiplexed I/O & Peripheral Pin SW (General)), 5 (SET: Multiplexed I/O & Peripheral Pin SET (CAN)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MIC2214-DNYML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2214-DNYML-TR (TDFN-10-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 2.30 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2214-DNYML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2214-DNYML-TR (MICROCHIP, TDFN-10-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & MIC2214 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VINPower_InPrimary positive power supply input (VIN) operating in the 2.25V to 5.5V domain (Max rating: 5.5V).
2ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
3CBYPDigital_IOSignal terminal CBYP (I/O, 2.25V to 5.5V domain). Multiplexed alternate functions: CBYP. Supported peripheral buses: General.
4SWOpen_DrainSignal terminal SW (I/O, 2.25V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
5SETDigital_IOSignal terminal SET (I/O, 2.25V to 5.5V domain). Multiplexed alternate functions: SET. Supported peripheral buses: CAN.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7DRVOpen_DrainSignal terminal DRV (I/O, 2.25V to 5.5V domain). Multiplexed alternate functions: DRV. Supported peripheral buses: General.
8POROpen_DrainSignal terminal POR (I/O, 2.25V to 5.5V domain). Multiplexed alternate functions: POR. Supported peripheral buses: General.
9VOUT2Power_InPrimary positive power supply input (VOUT2) operating in the 2.25V to 5.5V domain (Max rating: 5.5V).
10VOUT1Power_InPrimary positive power supply input (VOUT1) operating in the 2.25V to 5.5V domain (Max rating: 5.5V).
11EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.