MIC2171WU (TO-263-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2171WU

MICROCHIPTO-263-5 · 6 Pins · Pitch 1.70mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2171WU (TO-263-5)1COMP2FB3GND6EP5IN4SWGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
654321E=9.00mm · Pitch e=1.70mmD=10.10mm-14-12-10-8-6-4-2024681097531-1-3-5-7-9mm
3. 3D CAD MODEL
Package Body: 9.00mm × 10.10mm · Pitch: 1.70mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1COMPI/OMultiplexed I/O & Peripheral Pin COMP (CAN)
2FBI/OMultiplexed I/O & Peripheral Pin FB (General)
3GNDGNDGround Reference Pin (GND)
4SWI/OMultiplexed I/O & Peripheral Pin SW (General)
5INI/OMultiplexed I/O & Peripheral Pin IN (General)
6EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 COMP
I/O
Multiplexed I/O & Peripheral Pin COMP (CAN)
Design note: Frequency Compensation: Output of transconductance-type error amplifier. Primary function is for loop stabilization. Can also be used for output voltage soft-start and current limit tailoring.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2171WU (TO-263-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2171WU (TO-263-5) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2171WU (TO-263-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2171WU (TO-263-5) - 4. Package Dimensions (D×E×A)
TO-263-5 · 9.00×10.10mm · Pitch 1.70mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2171WU (TO-263-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2171WU (TO-263-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MIC2171
P16 · p16_fig01EXACT PACKAGE
MIC2171WU (TO-263-5) — MIC2171
MIC2171
P1 · p01_fig01376×200px
MIC2171WU (TO-263-5) — 100 kHz, 2.5A Switching Regulator
100 kHz, 2.5A Switching Regulator
P2 · p02_fig011050×825px
MIC2171WU (TO-263-5) — Typical Application Circuits
Typical Application Circuits
P2 · p02_fig021050×844px
MIC2171WU (TO-263-5) — * Optional voltage clipper (may be req’d if T1 leakage inductance too high)
* Optional voltage clipper (may be req’d if T1 leakage inductance too high)
P2 · p02_fig031777×1153px
MIC2171WU (TO-263-5) — Functional Block Diagram
Functional Block Diagram
P9 · p09_fig011777×1517px
MIC2171WU (TO-263-5) — FIGURE 5-2: Current Limit.
FIGURE 5-2: Current Limit.
P11 · p11_fig011778×1840px
MIC2171WU (TO-263-5) — IOUT 0.389A 
IOUT 0.389A 
P11 · p11_fig01P11
MIC2171WU (TO-263-5) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P16 · p16_fig021359×815px
MIC2171WU (TO-263-5) — ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) and/or Overbar (‾) symbol may not be to scale. | 3 e | 3 e
●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) and/or Overbar (‾) symbol may not be to scale. | 3 e | 3 e
P16 · p16_fig01P16
MIC2171WU (TO-263-5) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
P18 · p18_fig011665×1754px
MIC2171WU (TO-263-5) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P18 · p18_fig01P18
MIC2171WU (TO-263-5) — Datasheet Page 18 (p18_fig01)
Datasheet Page 18 (p18_fig01)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MIC2171WU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2171WU (TO-263-5) is a 6-pin standard electronic & interconnect component featuring a 10.10 × 9.00 × 4.50 mm mechanical envelope (lead pitch e = 1.70 mm). Rated for 3V to 40V supply operation across 40°C to +85°C with integrated CAN interfaces.
Operating Supply VoltageV_CC / V_DD
3V to 40V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.10 × 9.00 × 4.50 mm (A1=0.08 mm)
Package family: TO263 (TO-263-5)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 1.70 mm (66.9 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 1.70mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TO-263-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.10 × 9.00 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=1.70mm
Pad Size (W × L)Level B
1.02 × 3.80 mm
Pins / Total PadsTopology
6P / 6Pad (SOT_TAB)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-263-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2171WU (TO-263-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2171WU (TO-263-5)?

Manufactured by MICROCHIP, the MIC2171WU is housed in a TO-263-5 package with 6 pins and a 1.70 mm lead pitch, supporting a VCC supply range of 3V to 40V. Key pins include: 1 (COMP: Multiplexed I/O & Peripheral Pin COMP (CAN)), 2 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 3 (GND: Ground Reference Pin (GND)), 4 (SW: Multiplexed I/O & Peripheral Pin SW (General)), 5 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 6 (EP: Exposed Thermal & Ground Pad (EP)).

What are the IPC-7351B PCB Footprint dimensions for MIC2171WU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2171WU (TO-263-5) has a nominal body envelope of 9.00 × 10.10 mm, pitch e = 1.70 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2171WU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2171WU (MICROCHIP, TO-263-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & MIC2171 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1COMPDigital_IOSignal terminal COMP (I/O, 3V to 40V domain). Multiplexed alternate functions: COMP. Supported peripheral buses: CAN.
2FBDigital_IOSignal terminal FB (I/O, 3V to 40V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4SWDigital_IOSignal terminal SW (I/O, 3V to 40V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
5INDigital_IOSignal terminal IN (I/O, 3V to 40V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
6EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.