MIC2124YMM (MSOP-10) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2124YMM

MICROCHIPMSOP-10 · 10 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2124YMM (MSOP-10)1HSD2EN/COMP3FB4GND5IN10BST9LX8DH7PGND6DLGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
12345678910E=3.00mm · Pitch e=0.50mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (10/10)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1HSDI/OMultiplexed I/O & Peripheral Pin HSD (General)
2EN/COMPI/OMultiplexed I/O & Peripheral Pin EN/COMP (General)
3FBI/OMultiplexed I/O & Peripheral Pin FB (General)
4GNDGNDGround Reference Pin (GND)
5INI/OMultiplexed I/O & Peripheral Pin IN (General)
6DLI/OMultiplexed I/O & Peripheral Pin DL (General)
7PGNDGNDGround Reference Pin (PGND)
8DHI/OMultiplexed I/O & Peripheral Pin DH (General)
9LXI/OMultiplexed I/O & Peripheral Pin LX (General)
10BSTI/OMultiplexed I/O & Peripheral Pin BST (General)
PIN 1 HSD
I/O
Multiplexed I/O & Peripheral Pin HSD (General)
Design note: High-Side N-MOSFET Drain Connection (Input): Input voltage for the internal sensing of external power stage supply. The HSD operating voltage range is from 3V to 18V. Input capacitors between HSD and the power ground (PGND) are required.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2124YMM (MSOP-10) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2124YMM (MSOP-10) - 2. Standard Pinout (Top View)
True package pinout (10 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2124YMM (MSOP-10) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2124YMM (MSOP-10) - 4. Package Dimensions (D×E×A)
MSOP-10 · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2124YMM (MSOP-10) - 5. Recommended Land Pattern
IPC-7351B Footprint (10 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2124YMM (MSOP-10) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MIC2124
P2 · p02_fig01EXACT PACKAGE
MIC2124YMM (MSOP-10) — 10-Pin MSOP (MM) Pin Description
10-Pin MSOP (MM) Pin Description
P23 · p23_fig01EXACT PACKAGE
MIC2124YMM (MSOP-10) — 10-Pin MSOP (MM)
10-Pin MSOP (MM)
P1 · p01_fig011358×511px
MIC2124YMM (MSOP-10) — 60
60
P1 · p01_fig02680×714px
MIC2124YMM (MSOP-10) — Hyper Speed Control and Any Capacitor are trademarks of Micrel, Inc.
Hyper Speed Control and Any Capacitor are trademarks of Micrel, Inc.
P1 · p01_fig02P1
MIC2124YMM (MSOP-10) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig01P2
MIC2124YMM (MSOP-10) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P15 · p15_fig01800×524px
MIC2124YMM (MSOP-10) — Figure 6. Loop Compensation
Figure 6. Loop Compensation
P21 · p21_fig01881×877px
MIC2124YMM (MSOP-10) — Figure 11. MIC2124 Evaluation Board Top layer
Figure 11. MIC2124 Evaluation Board Top layer
P21 · p21_fig02881×877px
MIC2124YMM (MSOP-10) — Figure 12. MIC2124 Evaluation Board Mid-Layer 1(Ground Plane)
Figure 12. MIC2124 Evaluation Board Mid-Layer 1(Ground Plane)
P21 · p21_fig01P21
MIC2124YMM (MSOP-10) — Datasheet Page 21 (p21_fig01)
Datasheet Page 21 (p21_fig01)

Technical Specifications & Part Details (MIC2124YMM)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2124YMM (MSOP-10) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3V to 18V supply operation across -65°C to +150°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3V to 18V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
300kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-10)
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol10 auto-grouped pins
OK
IPC-7351B Land Pattern10 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-10)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 1.25 mm
Pins / Total PadsTopology
10P / 10Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-10
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2124YMM (MSOP-10)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2124YMM (MSOP-10)?

Manufactured by MICROCHIP, the MIC2124YMM is housed in a MSOP-10 package with 10 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3V to 18V. Key pins include: 1 (HSD: Multiplexed I/O & Peripheral Pin HSD (General)), 2 (EN/COMP: Multiplexed I/O & Peripheral Pin EN/COMP (General)), 3 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 4 (GND: Ground Reference Pin (GND)), 5 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 6 (DL: Multiplexed I/O & Peripheral Pin DL (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC2124YMM?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2124YMM (MSOP-10) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 10 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2124YMM?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2124YMM (MICROCHIP, MSOP-10) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (10 pins) & MIC2124 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1HSDDigital_IOSignal terminal HSD (I/O, 3V to 18V domain). Multiplexed alternate functions: HSD. Supported peripheral buses: General.
2EN/COMPDigital_IOSignal terminal EN/COMP (I/O, 3V to 18V domain). Multiplexed alternate functions: EN/COMP. Supported peripheral buses: General.
3FBDigital_IOSignal terminal FB (I/O, 3V to 18V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5INDigital_IOSignal terminal IN (I/O, 3V to 18V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
6DLDigital_IOSignal terminal DL (I/O, 3V to 18V domain). Multiplexed alternate functions: DL. Supported peripheral buses: General.
7PGNDGND0V electrical ground return terminal (PGND) for internal core logic, I/O drivers, and analog sub-blocks.
8DHDigital_IOSignal terminal DH (I/O, 3V to 18V domain). Multiplexed alternate functions: DH. Supported peripheral buses: General.
9LXDigital_IOSignal terminal LX (I/O, 3V to 18V domain). Multiplexed alternate functions: LX. Supported peripheral buses: General.
10BSTDigital_IOSignal terminal BST (I/O, 3V to 18V domain). Multiplexed alternate functions: BST. Supported peripheral buses: General.