MIC2027-1YWM (SOIC-16-300mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2027-1YWM

MICROCHIPSOIC-16-300mil · 16 Pins · Pitch 1.27mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2027-1YWM (SOIC-16-300mil)1FLG2ENA3OUTA4GND5IN(C/D)6OUTC7ENC8FLGC16FLGB15ENB14OUTB13IN(A/B)12GND11OUTD10END9FLGDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
12345678910111213141516E=7.50mm · Pitch e=1.27mmD=10.30mm-8-6-4-20246886420-2-4-6-8mm
3. 3D CAD MODEL
Package Body: 7.50mm × 10.30mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (16/16)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1FLGI/OMultiplexed I/O & Peripheral Pin FLG (General)
2ENAI/OMultiplexed I/O & Peripheral Pin ENA (General)
3OUTAI/OMultiplexed I/O & Peripheral Pin OUTA (General)
4GNDGNDGround Reference Pin (GND)
5IN(C/D)I/OMultiplexed I/O & Peripheral Pin IN(C/D) (General)
6OUTCI/OMultiplexed I/O & Peripheral Pin OUTC (General)
7ENCI/OMultiplexed I/O & Peripheral Pin ENC (General)
8FLGCI/OMultiplexed I/O & Peripheral Pin FLGC (General)
9FLGDI/OMultiplexed I/O & Peripheral Pin FLGD (General)
10ENDI/OMultiplexed I/O & Peripheral Pin END (General)
11OUTDI/OMultiplexed I/O & Peripheral Pin OUTD (General)
12GNDGNDGround Reference Pin (GND)
13IN(A/B)I/OMultiplexed I/O & Peripheral Pin IN(A/B) (General)
14OUTBI/OMultiplexed I/O & Peripheral Pin OUTB (General)
15ENBI/OMultiplexed I/O & Peripheral Pin ENB (General)
16FLGBI/OMultiplexed I/O & Peripheral Pin FLGB (General)
PIN 1 FLG
I/O
Multiplexed I/O & Peripheral Pin FLG (General)
Design note: Fault Flag A (Output): Active-low, open-drain output. Low indicates overcurrent or thermal shutdown conditions. Overcurrent conditions must last longer than t to assert flag. D
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2027-1YWM (SOIC-16-300mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2027-1YWM (SOIC-16-300mil) - 2. Standard Pinout (Top View)
True package pinout (16 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2027-1YWM (SOIC-16-300mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2027-1YWM (SOIC-16-300mil) - 4. Package Dimensions (D×E×A)
SOIC-16-300mil · 7.50×10.30mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2027-1YWM (SOIC-16-300mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (16 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2027-1YWM (SOIC-16-300mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for MIC2027
P2 · p02_fig02EXACT PACKAGE
MIC2027-1YWM (SOIC-16-300mil) — MIC2077-2BM MIC2077-2YM Active Low -40°C to +85°C 16-Pin SOIC Pin Configuration
MIC2077-2BM MIC2077-2YM Active Low -40°C to +85°C 16-Pin SOIC Pin Configuration
P2 · p02_fig03EXACT PACKAGE
MIC2027-1YWM (SOIC-16-300mil) — MIC2077-2BM MIC2077-2YM Active Low -40°C to +85°C 16-Pin SOIC Pin Configuration
MIC2077-2BM MIC2077-2YM Active Low -40°C to +85°C 16-Pin SOIC Pin Configuration
P16 · p16_fig01EXACT PACKAGE
MIC2027-1YWM (SOIC-16-300mil) — Micrel, Inc. MIC2027/2077 | Package Information | 16-Pin SOIC (M)
Micrel, Inc. MIC2027/2077 | Package Information | 16-Pin SOIC (M)
P1 · p01_fig011592×795px
MIC2027-1YWM (SOIC-16-300mil) — Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
P1 · p01_fig01P1
MIC2027-1YWM (SOIC-16-300mil) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig011684×703px
MIC2027-1YWM (SOIC-16-300mil) — Micrel, Inc. MIC2027/2077 | Ordering Information(1) | Part Number | Standard Pb-Free Enable Temperature Range Package | MIC2027-1BWM MIC2027-1YWM Active High -40°C to +85°C 16-Pin Wide SOIC | MIC2027-1BM MIC2027-1YM Active High -40°C to +85
Micrel, Inc. MIC2027/2077 | Ordering Information(1) | Part Number | Standard Pb-Free Enable Temperature Range Package | MIC2027-1BWM MIC2027-1YWM Active High -40°C to +85°C 16-Pin Wide SOIC | MIC2027-1BM MIC2027-1YM Active High -40°C to +85
P2 · p02_fig03P2
MIC2027-1YWM (SOIC-16-300mil) — Datasheet Page 2 (p02_fig03)
Datasheet Page 2 (p02_fig03)
P15 · p15_fig01723×651px
MIC2027-1YWM (SOIC-16-300mil) — Figure 3. Transient Filter
Figure 3. Transient Filter

Technical Specifications & Part Details (MIC2027-1YWM)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2027-1YWM (SOIC-16-300mil) is a 16-pin standard electronic & interconnect component featuring a 10.30 × 7.50 × 2.70 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.7V to 5.5V supply operation across 40°C to +85°C with integrated USB interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.30 × 7.50 × 2.70 mm (A1=0.20 mm)
Package family: SOIC (SOIC-16-300mil)
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol16 auto-grouped pins
OK
IPC-7351B Land Pattern16 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-16-300mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.30 × 7.50 mm
Height (A) & Pitch (e)IPC-7351B
A=2.70mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.90 mm
Pins / Total PadsTopology
16P / 16Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-16-300mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2027-1YWM (SOIC-16-300mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2027-1YWM (SOIC-16-300mil)?

Manufactured by MICROCHIP, the MIC2027-1YWM is housed in a SOIC-16-300mil package with 16 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (FLG: Multiplexed I/O & Peripheral Pin FLG (General)), 2 (ENA: Multiplexed I/O & Peripheral Pin ENA (General)), 3 (OUTA: Multiplexed I/O & Peripheral Pin OUTA (General)), 4 (GND: Ground Reference Pin (GND)), 5 (IN(C/D): Multiplexed I/O & Peripheral Pin IN(C/D) (General)), 6 (OUTC: Multiplexed I/O & Peripheral Pin OUTC (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC2027-1YWM?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2027-1YWM (SOIC-16-300mil) has a nominal body envelope of 7.50 × 10.30 mm, pitch e = 1.27 mm, and 16 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2027-1YWM?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2027-1YWM (MICROCHIP, SOIC-16-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (16 pins) & MIC2027 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1FLGOpen_DrainSignal terminal FLG (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FLG. Supported peripheral buses: General.
2ENADigital_IOSignal terminal ENA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: ENA. Supported peripheral buses: General.
3OUTADigital_IOSignal terminal OUTA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUTA. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5IN(C/D)Digital_IOSignal terminal IN(C/D) (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: IN(C/D). Supported peripheral buses: General.
6OUTCDigital_IOSignal terminal OUTC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUTC. Supported peripheral buses: General.
7ENCDigital_IOSignal terminal ENC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: ENC. Supported peripheral buses: General.
8FLGCDigital_IOSignal terminal FLGC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FLGC. Supported peripheral buses: General.
9FLGDDigital_IOSignal terminal FLGD (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FLGD. Supported peripheral buses: General.
10ENDDigital_IOSignal terminal END (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: END. Supported peripheral buses: General.
11OUTDDigital_IOSignal terminal OUTD (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUTD. Supported peripheral buses: General.
12GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
13IN(A/B)Digital_IOSignal terminal IN(A/B) (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: IN(A/B). Supported peripheral buses: General.
14OUTBDigital_IOSignal terminal OUTB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: OUTB. Supported peripheral buses: General.
15ENBDigital_IOSignal terminal ENB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: ENB. Supported peripheral buses: General.
16FLGBDigital_IOSignal terminal FLGB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FLGB. Supported peripheral buses: General.