MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2015-0.8YML-TR

MICROCHIPTDFN-6-EP(2x2) · 7 Pins · Pitch 0.65mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2015-0.8YML-TR (TDFN-6-EP(2x2))1VOUT2CSLEW3FAULT/4ENABLE7GND6VIN5GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
7654321E=2.00mm · Pitch e=0.65mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (7/7)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VOUTPowerRegulated Power Output (VOUT — 2.5V - 5.5V)
2CSLEWI/OMultiplexed I/O & Peripheral Pin CSLEW (General)
3FAULT/I/OMultiplexed I/O & Peripheral Pin FAULT/ (General)
4ENABLEI/OMultiplexed I/O & Peripheral Pin ENABLE (General)
5GNDGNDGround Reference Pin (GND)
6VINPowerPower Supply Input (VIN — 2.5V - 5.5V)
7GNDGNDGround Reference Pin (GND)
PIN 1 VOUT
Power
Regulated Power Output (VOUT — 2.5V - 5.5V)
Design note: Regulated power output rail (VOUT) operating in the 2.5V - 5.5V domain (Max rating: 5.5V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 24 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) - 2. Standard Pinout (Top View)
True package pinout (7 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) - 4. Package Dimensions (D×E×A)
TDFN-6-EP(2x2) · 2.00×2.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (7 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (24 figures · Page 1/2)
Showing 1–12 of 24 uncropped original figures for MIC2015 / MIC2003 / MIC2008
P1 · p01_fig01376×200px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Fixed and Adjustable Current Limiting Power Distribution Switches
Fixed and Adjustable Current Limiting Power Distribution Switches
P2 · p02_fig02427×269px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Top View
Top View
P2 · p02_fig05758×301px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Fixed Current Limit (MIC20X6)
Fixed Current Limit (MIC20X6)
P2 · p02_fig06473×270px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Top View
Top View
P2 · p02_fig07491×269px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Top View
Top View
P2 · p02_fig07P2
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Datasheet Page 2 (p02_fig07)
Datasheet Page 2 (p02_fig07)
P4 · p04_fig011300×374px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Typical Application Circuit
Typical Application Circuit
P4 · p04_fig021636×1065px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Functional Block Diagram
Functional Block Diagram
P20 · p20_fig011780×2466px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — DS20006486B-page 20  2021 Microchip Technology Inc.
DS20006486B-page 20  2021 Microchip Technology Inc.
P23 · p23_fig011777×1108px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — FIGURE 5-7: VUVLO Application Circuit. 5.4.1 CALCULATING VUVLO RESISTOR DIVIDER VALUES
FIGURE 5-7: VUVLO Application Circuit. 5.4.1 CALCULATING VUVLO RESISTOR DIVIDER VALUES
P23 · p23_fig021779×887px
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Using the divider loading current IDIV of 100 µA, the value of R2 can be estimated by:
Using the divider loading current IDIV of 100 µA, the value of R2 can be estimated by:
P23 · p23_fig01P23
MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) — Datasheet Page 23 (p23_fig01)
Datasheet Page 23 (p23_fig01)
Page 1 / 2 (24 extracted figures)

Technical Specifications & Part Details (MIC2015-0.8YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) is a 6-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.5V - 5.5V supply operation across 40°C to +85°C with integrated USB interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V - 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (TDFN-6-EP(2x2))
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol7 auto-grouped pins
OK
IPC-7351B Land Pattern7 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC2015 / MIC2003 / MIC2008 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TDFN-6-EP(2x2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.50 mm
Pins / Total PadsTopology
7P / 7Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-6-EP(2x2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2015-0.8YML-TR (TDFN-6-EP(2x2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2015-0.8YML-TR (TDFN-6-EP(2x2))?

Manufactured by MICROCHIP, the MIC2015-0.8YML-TR is housed in a TDFN-6-EP(2x2) package with 7 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.5V - 5.5V. Key pins include: 1 (VOUT: Regulated Power Output (VOUT — 2.5V - 5.5V)), 2 (CSLEW: Multiplexed I/O & Peripheral Pin CSLEW (General)), 3 (FAULT/: Multiplexed I/O & Peripheral Pin FAULT/ (General)), 4 (ENABLE: Multiplexed I/O & Peripheral Pin ENABLE (General)), 5 (GND: Ground Reference Pin (GND)), 6 (VIN: Power Supply Input (VIN — 2.5V - 5.5V)).

What are the IPC-7351B PCB Footprint dimensions for MIC2015-0.8YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2015-0.8YML-TR (TDFN-6-EP(2x2)) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.65 mm, and 7 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2015-0.8YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2015-0.8YML-TR (MICROCHIP, TDFN-6-EP(2x2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (7 pins) & MIC2015 / MIC2003 / MIC2008 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.5V - 5.5V domain (Max rating: 5.5V).
2CSLEWDigital_IOSignal terminal CSLEW (I/O, 2.5V - 5.5V domain). Multiplexed alternate functions: CSLEW. Supported peripheral buses: General.
3FAULT/Digital_IOSignal terminal FAULT/ (I/O, 2.5V - 5.5V domain). Multiplexed alternate functions: FAULT/. Supported peripheral buses: General.
4ENABLEDigital_IOSignal terminal ENABLE (I/O, 2.5V - 5.5V domain). Multiplexed alternate functions: ENABLE. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6VINPower_InPrimary positive power supply input (VIN) operating in the 2.5V - 5.5V domain (Max rating: 5.5V).
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.