MCP6S22-I/MS (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP6S22-I/MS

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP6S22-I/MS (MSOP-8)1V OUT2CH03VREF4VSS8VDD7SCK6SI5CSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
2CH0I/OMultiplexed I/O & Peripheral Pin CH0 (General)
3VREFAnalogMultiplexed I/O & Peripheral Pin VREF (General)
4VSSGNDGround Reference Pin (VSS)
5CSI/OMultiplexed I/O & Peripheral Pin CS (SPI)
6SII/OMultiplexed I/O & Peripheral Pin SI (SPI)
7SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
8VDDPowerPower Supply Input (VDD — 2.5V to 5.5V)
PIN 1 V OUT
I/O
Multiplexed I/O & Peripheral Pin V OUT (General)
Design note: Analog Output
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP6S22-I/MS (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP6S22-I/MS (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP6S22-I/MS (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP6S22-I/MS (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP6S22-I/MS (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP6S22-I/MS (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MCP6S22
P1 · p01_fig011777×1176px
MCP6S22-I/MS (MSOP-8) — Typical Applications
Typical Applications
P22 · p22_fig011779×1126px
MCP6S22-I/MS (MSOP-8) — FIGURE 5-3: Daisy CH340N Configuration.
FIGURE 5-3: Daisy CH340N Configuration.
P22 · p22_fig01P22
MCP6S22-I/MS (MSOP-8) — Datasheet Page 22 (p22_fig01)
Datasheet Page 22 (p22_fig01)
P25 · p25_fig011497×687px
MCP6S22-I/MS (MSOP-8) — FIGURE 6-1: PGA with Different External Reference Voltage. 6.2 Capacitive Load and Stability
FIGURE 6-1: PGA with Different External Reference Voltage. 6.2 Capacitive Load and Stability
P25 · p25_fig021635×459px
MCP6S22-I/MS (MSOP-8) — FIGURE 6-2: PGA Circuit for Large Capacitive Loads.
FIGURE 6-2: PGA Circuit for Large Capacitive Loads.
P26 · p26_fig011777×1096px
MCP6S22-I/MS (MSOP-8) — FIGURE 6-3: Wide Dynamic Range Current Measurement Circuit. 6.4.2 SHIFTED GAIN RANGE PGA
FIGURE 6-3: Wide Dynamic Range Current Measurement Circuit. 6.4.2 SHIFTED GAIN RANGE PGA
P26 · p26_fig02867×366px
MCP6S22-I/MS (MSOP-8) — FIGURE 6-6: PGA with Extended Gain Range. 6.4.4 MULTIPLE SENSOR AMPLIFIER
FIGURE 6-6: PGA with Extended Gain Range. 6.4.4 MULTIPLE SENSOR AMPLIFIER
P26 · p26_fig031777×778px
MCP6S22-I/MS (MSOP-8) — FIGURE 6-6: PGA with Extended Gain Range. 6.4.4 MULTIPLE SENSOR AMPLIFIER
FIGURE 6-6: PGA with Extended Gain Range. 6.4.4 MULTIPLE SENSOR AMPLIFIER
P26 · p26_fig01P26
MCP6S22-I/MS (MSOP-8) — Datasheet Page 26 (p26_fig01)
Datasheet Page 26 (p26_fig01)
P28 · p28_fig021361×458px
MCP6S22-I/MS (MSOP-8) — DS21117B-page 28  2003-2012 Microchip Technology Inc.
DS21117B-page 28  2003-2012 Microchip Technology Inc.
P32 · p32_fig011383×1001px
MCP6S22-I/MS (MSOP-8) — 2 | 1 | D | n | p | B | E | E1 | h | L  | c | 45 |  | A2 |  | A | A1 | Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
2 | 1 | D | n | p | B | E | E1 | h | L  | c | 45 |  | A2 |  | A | A1 | Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
P32 · p32_fig021442×751px
MCP6S22-I/MS (MSOP-8) — L 
L 
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MCP6S22-I/MS)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP6S22-I/MS (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.5V to 5.5V supply operation across -40°C to +85°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
12 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
1.0 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP6S22-I/MS (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP6S22-I/MS (MSOP-8)?

Manufactured by MICROCHIP, the MCP6S22-I/MS is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)), 2 (CH0: Multiplexed I/O & Peripheral Pin CH0 (General)), 3 (VREF: Multiplexed I/O & Peripheral Pin VREF (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (CS: Multiplexed I/O & Peripheral Pin CS (SPI)), 6 (SI: Multiplexed I/O & Peripheral Pin SI (SPI)).

What are the IPC-7351B PCB Footprint dimensions for MCP6S22-I/MS?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP6S22-I/MS (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP6S22-I/MS?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP6S22-I/MS (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MCP6S22 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V OUTDigital_IOSignal terminal V OUT (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
2CH0Digital_IOSignal terminal CH0 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: CH0. Supported peripheral buses: General.
3VREFAnalogSignal terminal VREF (Analog, 2.5V to 5.5V domain). Multiplexed alternate functions: VREF. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5CSDigital_IOSignal terminal CS (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: SPI_CHIP. Supported peripheral buses: SPI.
6SIDigital_IOSignal terminal SI (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: SPI_SERIAL. Supported peripheral buses: SPI.
7SCKDigital_IOSignal terminal SCK (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: SPI_CLOCK. Supported peripheral buses: SPI.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).