MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP6N11T-010E/MNY

MICROCHIPTDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP6N11T-010E/MNY (TDFN-8-EP(2x3))1V FG2V IM3V IP4VSS5VREF9EP8EN/CAL7VDD6V OUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V FGI/OMultiplexed I/O & Peripheral Pin V FG (General)
2V IMI/OMultiplexed I/O & Peripheral Pin V IM (General)
3V IPI/OMultiplexed I/O & Peripheral Pin V IP (General)
4VSSGNDGround Reference Pin (VSS)
5VREFAnalogMultiplexed I/O & Peripheral Pin VREF (General)
6V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
7VDDPowerPower Supply Input (VDD — 1.8V to 5.5V)
8EN/CALI/OMultiplexed I/O & Peripheral Pin EN/CAL (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 V FG
I/O
Multiplexed I/O & Peripheral Pin V FG (General)
Design note: Feedback Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
TDFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MCP6N11T
P1 · p01_fig01377×200px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — 500 kHz, 800 µA Instrumentation Amplifier
500 kHz, 800 µA Instrumentation Amplifier
P1 · p01_fig021777×1452px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — © 2011 Microchip Technology Inc. DS25073A-page 1 | Typical Applications | • High Side Current Sensor • Wheatstone Bridge Sensors • Difference Amplifier with Level Shifting • Power Control Loops | Design Aids | • Microchip Advanced Part Sele
© 2011 Microchip Technology Inc. DS25073A-page 1 | Typical Applications | • High Side Current Sensor • Wheatstone Bridge Sensors • Difference Amplifier with Level Shifting • Power Control Loops | Design Aids | • Microchip Advanced Part Sele
P1 · p01_fig02P1
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P33 · p33_fig011777×942px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — Figure 4-11 shows the MCP6N11 used as a difference amplifier. The inputs are high impedance and give good CMRR performance.
Figure 4-11 shows the MCP6N11 used as a difference amplifier. The inputs are high impedance and give good CMRR performance.
P33 · p33_fig021777×829px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — FIGURE 4-12: Difference Amplifier with Very Large Common Mode Component.
FIGURE 4-12: Difference Amplifier with Very Large Common Mode Component.
P37 · p37_fig011616×1409px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — MCP6N11
MCP6N11
P37 · p37_fig02313×466px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — 8-Lead TDFN (2×3) (MCP6N11) Example
8-Lead TDFN (2×3) (MCP6N11) Example
P37 · p37_fig03314×466px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — 8-Lead TDFN (2×3) (MCP6N11) Example
8-Lead TDFN (2×3) (MCP6N11) Example
P37 · p37_fig041777×868px
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — © 2011 Microchip Technology Inc. DS25073A-page 37 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2011 Microchip Technology Inc. DS25073A-page 37 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P37 · p37_fig01P37
MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) — Datasheet Page 37 (p37_fig01)
Datasheet Page 37 (p37_fig01)

Technical Specifications & Part Details (MCP6N11T-010E/MNY)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 5.5V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
500 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
800 μA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (TDFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.40×1.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TDFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP6N11T-010E/MNY (TDFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP6N11T-010E/MNY (TDFN-8-EP(2x3))?

Manufactured by MICROCHIP, the MCP6N11T-010E/MNY is housed in a TDFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (V FG: Multiplexed I/O & Peripheral Pin V FG (General)), 2 (V IM: Multiplexed I/O & Peripheral Pin V IM (General)), 3 (V IP: Multiplexed I/O & Peripheral Pin V IP (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (VREF: Multiplexed I/O & Peripheral Pin VREF (General)), 6 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP6N11T-010E/MNY?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP6N11T-010E/MNY (TDFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.40 × 1.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP6N11T-010E/MNY?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP6N11T-010E/MNY (MICROCHIP, TDFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP6N11T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V FGDigital_IOSignal terminal V FG (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: V FG. Supported peripheral buses: General.
2V IMDigital_IOSignal terminal V IM (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: V IM. Supported peripheral buses: General.
3V IPDigital_IOSignal terminal V IP (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: V IP. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5VREFAnalogSignal terminal VREF (Analog, 1.8V to 5.5V domain). Multiplexed alternate functions: VREF. Supported peripheral buses: General.
6V OUTDigital_IOSignal terminal V OUT (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
7VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
8EN/CALDigital_IOSignal terminal EN/CAL (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: EN/CAL. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.