MCP662T-E/MF (DFN-8-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP662T-E/MF

MICROCHIPDFN-8-EP(3x3) · 9 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP662T-E/MF (DFN-8-EP(3x3))1NC2V -, V - IN 3V +, V + IN 4VSS5NC9EP8CS, CSA7VDD6V , V OUT OUGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=3.00mm · Pitch e=0.65mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2V -, V - IN INAI/OMultiplexed I/O & Peripheral Pin V -, V - IN INA (General)
3V +, V + IN INAI/OMultiplexed I/O & Peripheral Pin V +, V + IN INA (General)
4VSSGNDGround Reference Pin (VSS)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6V , V OUT OUTAI/OMultiplexed I/O & Peripheral Pin V , V OUT OUTA (General)
7VDDPowerPower Supply Input (VDD — 3V to 1.2V)
8CS, CSAI/OMultiplexed I/O & Peripheral Pin CS, CSA (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: No Internal Connection
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 25 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP662T-E/MF (DFN-8-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP662T-E/MF (DFN-8-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP662T-E/MF (DFN-8-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP662T-E/MF (DFN-8-EP(3x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP662T-E/MF (DFN-8-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP662T-E/MF (DFN-8-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (25 figures · Page 1/3)
Showing 1–12 of 25 uncropped original figures for MCP662
P1 · p01_fig01377×200px
MCP662T-E/MF (DFN-8-EP(3x3)) — 60 MHz, 32 V/µs Rail-to-Rail Output (RRO) Op Amps
60 MHz, 32 V/µs Rail-to-Rail Output (RRO) Op Amps
P1 · p01_fig021778×1560px
MCP662T-E/MF (DFN-8-EP(3x3)) —  2009-2014 Microchip Technology Inc. DS20002194E-page 1 | Typical Applications: | • Multi-Pole Active Filter • Driving A/D Converters • Power Amplifier Control Loops • Line Driver • Video Amplifier • Barcode Scanners • Optical Detector Amp
 2009-2014 Microchip Technology Inc. DS20002194E-page 1 | Typical Applications: | • Multi-Pole Active Filter • Driving A/D Converters • Power Amplifier Control Loops • Line Driver • Video Amplifier • Barcode Scanners • Optical Detector Amp
P1 · p01_fig02P1
MCP662T-E/MF (DFN-8-EP(3x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig011025×644px
MCP662T-E/MF (DFN-8-EP(3x3)) — MCP662 MSOP, SOIC
MCP662 MSOP, SOIC
P2 · p02_fig02462×412px
MCP662T-E/MF (DFN-8-EP(3x3)) — VOUTA 7 8 VOUTB
VOUTA 7 8 VOUTB
P2 · p02_fig031205×378px
MCP662T-E/MF (DFN-8-EP(3x3)) — MCP663 SOIC
MCP663 SOIC
P2 · p02_fig041233×377px
MCP662T-E/MF (DFN-8-EP(3x3)) — MCP663 SOIC
MCP663 SOIC
P2 · p02_fig05405×373px
MCP662T-E/MF (DFN-8-EP(3x3)) — VSS
VSS
P2 · p02_fig06477×415px
MCP662T-E/MF (DFN-8-EP(3x3)) — VOUTB 7 8 VOUTC
VOUTB 7 8 VOUTC
P2 · p02_fig07482×515px
MCP662T-E/MF (DFN-8-EP(3x3)) — MCP669 4x4 QFN*
MCP669 4x4 QFN*
P2 · p02_fig08463×377px
MCP662T-E/MF (DFN-8-EP(3x3)) — * Includes Exposed Thermal Pad (EP); see Table 3-1.
* Includes Exposed Thermal Pad (EP); see Table 3-1.
P2 · p02_fig09448×416px
MCP662T-E/MF (DFN-8-EP(3x3)) — * Includes Exposed Thermal Pad (EP); see Table 3-1.
* Includes Exposed Thermal Pad (EP); see Table 3-1.
Page 1 / 3 (25 extracted figures)

Technical Specifications & Part Details (MCP662T-E/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP662T-E/MF (DFN-8-EP(3x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 3V to 1.2V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3V to 1.2V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
60 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
70 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(3x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 2.00×1.47mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP662 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (DFN-8-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.84 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP662T-E/MF (DFN-8-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP662T-E/MF (DFN-8-EP(3x3))?

Manufactured by MICROCHIP, the MCP662T-E/MF is housed in a DFN-8-EP(3x3) package with 9 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 3V to 1.2V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (V -, V - IN INA: Multiplexed I/O & Peripheral Pin V -, V - IN INA (General)), 3 (V +, V + IN INA: Multiplexed I/O & Peripheral Pin V +, V + IN INA (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (V , V OUT OUTA: Multiplexed I/O & Peripheral Pin V , V OUT OUTA (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP662T-E/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP662T-E/MF (DFN-8-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 2.00 × 1.47 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP662T-E/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP662T-E/MF (MICROCHIP, DFN-8-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP662 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 3V to 1.2V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2V -, V - IN INADigital_IOSignal terminal V -, V - IN INA (I/O, 3V to 1.2V domain). Multiplexed alternate functions: V -, V - IN INA. Supported peripheral buses: General.
3V +, V + IN INADigital_IOSignal terminal V +, V + IN INA (I/O, 3V to 1.2V domain). Multiplexed alternate functions: V +, V + IN INA. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5NCNCSignal terminal NC (I/O, 3V to 1.2V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6V , V OUT OUTADigital_IOSignal terminal V , V OUT OUTA (I/O, 3V to 1.2V domain). Multiplexed alternate functions: V , V OUT OUTA. Supported peripheral buses: General.
7VDDPower_InPrimary positive power supply input (VDD) operating in the 3V to 1.2V domain (Max rating: 3.0V).
8CS, CSADigital_IOSignal terminal CS, CSA (I/O, 3V to 1.2V domain). Multiplexed alternate functions: CS, CSA. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.