MCP651T-E/MNY (UFDFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP651T-E/MNY

MICROCHIPUFDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP651T-E/MNY (UFDFN-8-EP(2x3))1NC2V –, V – IN 3V +, V + IN 4VSS5V CAL9EP8CAL/CS, CALA7VDD6V , OUT V OUGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=3.00mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1NCI/OMultiplexed I/O & Peripheral Pin NC (General)
2V –, V – IN INAI/OMultiplexed I/O & Peripheral Pin V –, V – IN INA (General)
3V +, V + IN INAI/OMultiplexed I/O & Peripheral Pin V +, V + IN INA (General)
4VSSGNDGround Reference Pin (VSS)
5V CALI/OMultiplexed I/O & Peripheral Pin V CAL (General)
6V , OUT V OUTAI/OMultiplexed I/O & Peripheral Pin V , OUT V OUTA (General)
7VDDPowerPower Supply Input (VDD — 3V to 2.2V)
8CAL/CS, CALA/CSAI/OMultiplexed I/O & Peripheral Pin CAL/CS, CALA/CSA (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 NC
I/O
Multiplexed I/O & Peripheral Pin NC (General)
Design note: No Internal Connection
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 21 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP651T-E/MNY (UFDFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP651T-E/MNY (UFDFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP651T-E/MNY (UFDFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP651T-E/MNY (UFDFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
UFDFN-8-EP(2x3) · 3.00×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP651T-E/MNY (UFDFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP651T-E/MNY (UFDFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (21 figures · Page 1/2)
Showing 1–12 of 21 uncropped original figures for MCP651
P1 · p01_fig01377×200px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — 50 MHz, 200 µV Op Amps with mCal
50 MHz, 200 µV Op Amps with mCal
P1 · p01_fig02867×940px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — High Gain-Bandwidth Op Amp Portfolio
High Gain-Bandwidth Op Amp Portfolio
P1 · p01_fig02P1
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig011757×688px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — MCP652 SOIC
MCP652 SOIC
P2 · p02_fig021296×633px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — 6
6
P2 · p02_fig031720×713px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — VINA+ EP
VINA+ EP
P2 · p02_fig041459×865px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — VOUTB 7 8 VOUTC
VOUTB 7 8 VOUTC
P2 · p02_fig051098×545px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — VSS
VSS
P2 · p02_fig04P2
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — Datasheet Page 2 (p02_fig04)
Datasheet Page 2 (p02_fig04)
P23 · p23_fig01867×591px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — FIGURE 4-3: Simplified Analog Input ESD Structures.
FIGURE 4-3: Simplified Analog Input ESD Structures.
P23 · p23_fig02867×586px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — FIGURE 4-3: Simplified Analog Input ESD Structures.
FIGURE 4-3: Simplified Analog Input ESD Structures.
P23 · p23_fig03867×666px
MCP651T-E/MNY (UFDFN-8-EP(2x3)) — FIGURE 4-2: Setting VCM with External Resistors.
FIGURE 4-2: Setting VCM with External Resistors.
Page 1 / 2 (21 extracted figures)

Technical Specifications & Part Details (MCP651T-E/MNY)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP651T-E/MNY (UFDFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 2.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3V to 2.2V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3V to 2.2V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
50 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
100 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (UFDFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.40×1.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UFDFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UFDFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP651T-E/MNY (UFDFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP651T-E/MNY (UFDFN-8-EP(2x3))?

Manufactured by MICROCHIP, the MCP651T-E/MNY is housed in a UFDFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3V to 2.2V. Key pins include: 1 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 2 (V –, V – IN INA: Multiplexed I/O & Peripheral Pin V –, V – IN INA (General)), 3 (V +, V + IN INA: Multiplexed I/O & Peripheral Pin V +, V + IN INA (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (V CAL: Multiplexed I/O & Peripheral Pin V CAL (General)), 6 (V , OUT V OUTA: Multiplexed I/O & Peripheral Pin V , OUT V OUTA (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP651T-E/MNY?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP651T-E/MNY (UFDFN-8-EP(2x3)) has a nominal body envelope of 3.00 × 2.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.40 × 1.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP651T-E/MNY?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP651T-E/MNY (MICROCHIP, UFDFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP651 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1NCNCSignal terminal NC (I/O, 3V to 2.2V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
2V –, V – IN INADigital_IOSignal terminal V –, V – IN INA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V –, V – IN INA. Supported peripheral buses: General.
3V +, V + IN INADigital_IOSignal terminal V +, V + IN INA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V +, V + IN INA. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5V CALDigital_IOSignal terminal V CAL (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V CAL. Supported peripheral buses: General.
6V , OUT V OUTADigital_IOSignal terminal V , OUT V OUTA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V , OUT V OUTA. Supported peripheral buses: General.
7VDDPower_InPrimary positive power supply input (VDD) operating in the 3V to 2.2V domain (Max rating: 3.0V).
8CAL/CS, CALA/CSADigital_IOSignal terminal CAL/CS, CALA/CSA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: CAL/CS, CALA/CSA. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.