MCP629T-E/ML (QFN-16-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP629T-E/ML

MICROCHIPQFN-16-EP(4x4) · 17 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP629T-E/ML (QFN-16-EP(4x4))1V –, V – IN 2V +, V + IN 3VDD4V + INB5V – INB6V OUTB7CALBC/CSBC8V OUTC9V – INC17EP16V , V OUT OU15CALAD/CSAD14V OUTD13V – INDD12V + IND11VSS10V + INCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V –, V – IN INAI/OMultiplexed I/O & Peripheral Pin V –, V – IN INA (General)
2V +, V + IN INAI/OMultiplexed I/O & Peripheral Pin V +, V + IN INA (General)
3VDDPowerPower Supply Input (VDD — 3V to 2.2V)
4V + INBI/OMultiplexed I/O & Peripheral Pin V + INB (General)
5V – INBI/OMultiplexed I/O & Peripheral Pin V – INB (General)
6V OUTBI/OMultiplexed I/O & Peripheral Pin V OUTB (General)
7CALBC/CSBCI/OMultiplexed I/O & Peripheral Pin CALBC/CSBC (General)
8V OUTCI/OMultiplexed I/O & Peripheral Pin V OUTC (General)
9V – INCI/OMultiplexed I/O & Peripheral Pin V – INC (General)
10V + INCI/OMultiplexed I/O & Peripheral Pin V + INC (General)
11VSSGNDGround Reference Pin (VSS)
12V + INDI/OMultiplexed I/O & Peripheral Pin V + IND (General)
13V – INDDI/OMultiplexed I/O & Peripheral Pin V – INDD (General)
14V OUTDI/OMultiplexed I/O & Peripheral Pin V OUTD (General)
15CALAD/CSADI/OMultiplexed I/O & Peripheral Pin CALAD/CSAD (General)
16V , V OUT OUTAI/OMultiplexed I/O & Peripheral Pin V , V OUT OUTA (General)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 V –, V – IN INA
I/O
Multiplexed I/O & Peripheral Pin V –, V – IN INA (General)
Design note: Inverting Input (op amp A)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP629T-E/ML (QFN-16-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP629T-E/ML (QFN-16-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP629T-E/ML (QFN-16-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP629T-E/ML (QFN-16-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-16-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP629T-E/ML (QFN-16-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP629T-E/ML (QFN-16-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for MCP629
P1 · p01_fig01376×200px
MCP629T-E/ML (QFN-16-EP(4x4)) — 20 MHz, 200 µV Op Amps with mCal
20 MHz, 200 µV Op Amps with mCal
P1 · p01_fig02867×869px
MCP629T-E/ML (QFN-16-EP(4x4)) — High Gain-Bandwidth Op Amp Portfolio
High Gain-Bandwidth Op Amp Portfolio
P23 · p23_fig01867×592px
MCP629T-E/ML (QFN-16-EP(4x4)) — FIGURE 4-3: Simplified Analog Input ESD Structures.
FIGURE 4-3: Simplified Analog Input ESD Structures.
P23 · p23_fig021777×1166px
MCP629T-E/ML (QFN-16-EP(4x4)) — FIGURE 4-3: Simplified Analog Input ESD Structures.
FIGURE 4-3: Simplified Analog Input ESD Structures.
P25 · p25_fig011777×871px
MCP629T-E/ML (QFN-16-EP(4x4)) — Where:
Where:
P25 · p25_fig021777×2044px
MCP629T-E/ML (QFN-16-EP(4x4)) — FIGURE 4-8: Diagram for Capacitive Load Power Calculations. The output voltage is assumed to be: EQUATION 4-4:
FIGURE 4-8: Diagram for Capacitive Load Power Calculations. The output voltage is assumed to be: EQUATION 4-4:
P27 · p27_fig011777×887px
MCP629T-E/ML (QFN-16-EP(4x4)) — FIGURE 4-13: Power Driver. 4.7.2 OPTICAL DETECTOR AMPLIFIER
FIGURE 4-13: Power Driver. 4.7.2 OPTICAL DETECTOR AMPLIFIER
P27 · p27_fig02867×596px
MCP629T-E/ML (QFN-16-EP(4x4)) — FIGURE 4-14: Transimpedance Amplifier for an Optical Detector.
FIGURE 4-14: Transimpedance Amplifier for an Optical Detector.
P27 · p27_fig01P27
MCP629T-E/ML (QFN-16-EP(4x4)) — Datasheet Page 27 (p27_fig01)
Datasheet Page 27 (p27_fig01)
P33 · p33_fig011687×771px
MCP629T-E/ML (QFN-16-EP(4x4)) — Units
Units
P34 · p34_fig01866×1204px
MCP629T-E/ML (QFN-16-EP(4x4)) — MILLIMETERS
MILLIMETERS
P34 · p34_fig01P34
MCP629T-E/ML (QFN-16-EP(4x4)) — Datasheet Page 34 (p34_fig01)
Datasheet Page 34 (p34_fig01)
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (MCP629T-E/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP629T-E/ML (QFN-16-EP(4x4)) is a 16-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3V to 2.2V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3V to 2.2V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
70 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-16-EP(4x4))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.95×1.95mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-16-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 1.10 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-16-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP629T-E/ML (QFN-16-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP629T-E/ML (QFN-16-EP(4x4))?

Manufactured by MICROCHIP, the MCP629T-E/ML is housed in a QFN-16-EP(4x4) package with 17 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3V to 2.2V. Key pins include: 1 (V –, V – IN INA: Multiplexed I/O & Peripheral Pin V –, V – IN INA (General)), 2 (V +, V + IN INA: Multiplexed I/O & Peripheral Pin V +, V + IN INA (General)), 3 (VDD: Power Supply Input (VDD — 3V to 2.2V)), 4 (V + INB: Multiplexed I/O & Peripheral Pin V + INB (General)), 5 (V – INB: Multiplexed I/O & Peripheral Pin V – INB (General)), 6 (V OUTB: Multiplexed I/O & Peripheral Pin V OUTB (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP629T-E/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP629T-E/ML (QFN-16-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 1.95 × 1.95 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP629T-E/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP629T-E/ML (MICROCHIP, QFN-16-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & MCP629 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V –, V – IN INADigital_IOSignal terminal V –, V – IN INA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V –, V – IN INA. Supported peripheral buses: General.
2V +, V + IN INADigital_IOSignal terminal V +, V + IN INA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V +, V + IN INA. Supported peripheral buses: General.
3VDDPower_InPrimary positive power supply input (VDD) operating in the 3V to 2.2V domain (Max rating: 3.0V).
4V + INBDigital_IOSignal terminal V + INB (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V + INB. Supported peripheral buses: General.
5V – INBDigital_IOSignal terminal V – INB (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V – INB. Supported peripheral buses: General.
6V OUTBDigital_IOSignal terminal V OUTB (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V OUTB. Supported peripheral buses: General.
7CALBC/CSBCDigital_IOSignal terminal CALBC/CSBC (I/O, 3V to 2.2V domain). Multiplexed alternate functions: CALBC/CSBC. Supported peripheral buses: General.
8V OUTCDigital_IOSignal terminal V OUTC (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V OUTC. Supported peripheral buses: General.
9V – INCDigital_IOSignal terminal V – INC (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V – INC. Supported peripheral buses: General.
10V + INCDigital_IOSignal terminal V + INC (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V + INC. Supported peripheral buses: General.
11VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
12V + INDDigital_IOSignal terminal V + IND (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V + IND. Supported peripheral buses: General.
13V – INDDDigital_IOSignal terminal V – INDD (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V – INDD. Supported peripheral buses: General.
14V OUTDDigital_IOSignal terminal V OUTD (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V OUTD. Supported peripheral buses: General.
15CALAD/CSADDigital_IOSignal terminal CALAD/CSAD (I/O, 3V to 2.2V domain). Multiplexed alternate functions: CALAD/CSAD. Supported peripheral buses: General.
16V , V OUT OUTADigital_IOSignal terminal V , V OUT OUTA (I/O, 3V to 2.2V domain). Multiplexed alternate functions: V , V OUT OUTA. Supported peripheral buses: General.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.