MCP604-I/P (PDIP-14) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP604-I/P

MICROCHIPPDIP-14 · 14 Pins · Pitch 2.54mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP604-I/P (PDIP-14)1V OUTA2V – INA3V + INA4VSS5V + INB6V – INB7V OUTB14P1413P1312P1211P1110P109P98VDDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
1234567891011121314E=6.35mm · Pitch e=2.54mmD=17.24mm-9-7-5-3-113579131197531-1-3-5-7-9-11-13mm
3. 3D CAD MODEL
Package Body: 6.35mm × 17.24mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (14/14)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V OUTAI/OMultiplexed I/O & Peripheral Pin V OUTA (General)
2V – INAI/OMultiplexed I/O & Peripheral Pin V – INA (General)
3V + INAI/OMultiplexed I/O & Peripheral Pin V + INA (General)
4VSSGNDGround Reference Pin (VSS)
5V + INBI/OMultiplexed I/O & Peripheral Pin V + INB (General)
6V – INBI/OMultiplexed I/O & Peripheral Pin V – INB (General)
7V OUTBI/OMultiplexed I/O & Peripheral Pin V OUTB (General)
8VDDPowerPower Supply Input (VDD — 2.7V to 6.0V)
9P9I/OMultiplexed I/O & Peripheral Pin P9 (General)
10P10I/OMultiplexed I/O & Peripheral Pin P10 (General)
11P11I/OMultiplexed I/O & Peripheral Pin P11 (General)
12P12I/OMultiplexed I/O & Peripheral Pin P12 (General)
13P13I/OMultiplexed I/O & Peripheral Pin P13 (General)
14P14I/OMultiplexed I/O & Peripheral Pin P14 (General)
PIN 1 V OUTA
I/O
Multiplexed I/O & Peripheral Pin V OUTA (General)
Design note: Analog Output (op amp A)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP604-I/P (PDIP-14) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP604-I/P (PDIP-14) - 2. Standard Pinout (Top View)
True package pinout (14 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP604-I/P (PDIP-14) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP604-I/P (PDIP-14) - 4. Package Dimensions (D×E×A)
PDIP-14 · 6.35×17.24mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP604-I/P (PDIP-14) - 5. Recommended Land Pattern
IPC-7351B Footprint (14 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP604-I/P (PDIP-14) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MCP604 / MCP601
P1 · p01_fig011777×811px
MCP604-I/P (PDIP-14) — © 2007 Microchip Technology Inc. DS21314G-page 1 | • SPICE Macro Models • FilterLab® Software • Mindi™ Simulation Tool • MAPS (Microchip Advanced Part Selector) • Analog Demonstration and Evaluation Boards • Application Notes | Package Type
© 2007 Microchip Technology Inc. DS21314G-page 1 | • SPICE Macro Models • FilterLab® Software • Mindi™ Simulation Tool • MAPS (Microchip Advanced Part Selector) • Analog Demonstration and Evaluation Boards • Application Notes | Package Type
P3 · p03_fig011779×2541px
MCP604-I/P (PDIP-14) — FIGURE 1-1: MCP603 Chip Select (CS) Timing Diagram.
FIGURE 1-1: MCP603 Chip Select (CS) Timing Diagram.
P12 · p12_fig011777×987px
MCP604-I/P (PDIP-14) — FIGURE 4-2: Protecting the Analog Inputs.
FIGURE 4-2: Protecting the Analog Inputs.
P12 · p12_fig021543×591px
MCP604-I/P (PDIP-14) — FIGURE 4-1: Simplified Analog Input ESD Structures.
FIGURE 4-1: Simplified Analog Input ESD Structures.
P12 · p12_fig03867×346px
MCP604-I/P (PDIP-14) — FIGURE 4-1: Simplified Analog Input ESD Structures.
FIGURE 4-1: Simplified Analog Input ESD Structures.
P14 · p14_fig011777×765px
MCP604-I/P (PDIP-14) — FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
P14 · p14_fig021777×916px
MCP604-I/P (PDIP-14) — FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
P14 · p14_fig02P14
MCP604-I/P (PDIP-14) — Datasheet Page 14 (p14_fig02)
Datasheet Page 14 (p14_fig02)
P17 · p17_fig021777×785px
MCP604-I/P (PDIP-14) — © 2007 Microchip Technology Inc. DS21314G-page 17 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2007 Microchip Technology Inc. DS21314G-page 17 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P17 · p17_fig02P17
MCP604-I/P (PDIP-14) — Datasheet Page 17 (p17_fig02)
Datasheet Page 17 (p17_fig02)
P17 · p17_fig01All Packages in PDF
MCP604-I/P (PDIP-14) — MCP601/1R/2/3/4
MCP601/1R/2/3/4

Technical Specifications & Part Details (MCP604-I/P)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP604-I/P (PDIP-14) is a 14-pin standard electronic & interconnect component featuring a 17.24 × 6.35 × 4.20 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 2.7V to 6.0V supply operation across -40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 6.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2.8 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
230 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
17.24 × 6.35 × 4.20 mm (A1=0.51 mm)
Package family: DIP (PDIP-14)
Pin Count & Lead PitchN / e
14 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol14 auto-grouped pins
OK
IPC-7351B Land Pattern14 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP604 / MCP601 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (PDIP-14)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
17.24 × 6.35 mm
Height (A) & Pitch (e)IPC-7351B
A=4.20mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
14P / 14Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-14
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP604-I/P (PDIP-14)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP604-I/P (PDIP-14)?

Manufactured by MICROCHIP, the MCP604-I/P is housed in a PDIP-14 package with 14 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 2.7V to 6.0V. Key pins include: 1 (V OUTA: Multiplexed I/O & Peripheral Pin V OUTA (General)), 2 (V – INA: Multiplexed I/O & Peripheral Pin V – INA (General)), 3 (V + INA: Multiplexed I/O & Peripheral Pin V + INA (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (V + INB: Multiplexed I/O & Peripheral Pin V + INB (General)), 6 (V – INB: Multiplexed I/O & Peripheral Pin V – INB (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP604-I/P?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP604-I/P (PDIP-14) has a nominal body envelope of 6.35 × 17.24 mm, pitch e = 2.54 mm, and 14 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP604-I/P?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP604-I/P (MICROCHIP, PDIP-14) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (14 pins) & MCP604 / MCP601 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V OUTADigital_IOSignal terminal V OUTA (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V OUTA. Supported peripheral buses: General.
2V – INADigital_IOSignal terminal V – INA (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V – INA. Supported peripheral buses: General.
3V + INADigital_IOSignal terminal V + INA (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V + INA. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5V + INBDigital_IOSignal terminal V + INB (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V + INB. Supported peripheral buses: General.
6V – INBDigital_IOSignal terminal V – INB (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V – INB. Supported peripheral buses: General.
7V OUTBDigital_IOSignal terminal V OUTB (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V OUTB. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 6.0V domain (Max rating: 6.0V).
9P9Digital_IOSignal terminal P9 (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: P9. Supported peripheral buses: General.
10P10Digital_IOSignal terminal P10 (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: P10. Supported peripheral buses: General.
11P11Digital_IOSignal terminal P11 (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: P11. Supported peripheral buses: General.
12P12Digital_IOSignal terminal P12 (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: P12. Supported peripheral buses: General.
13P13Digital_IOSignal terminal P13 (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: P13. Supported peripheral buses: General.
14P14Digital_IOSignal terminal P14 (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: P14. Supported peripheral buses: General.