MCP4912T-E/ST (TSSOP-14) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP4912T-E/ST

MICROCHIPTSSOP-14 · 14 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP4912T-E/ST (TSSOP-14)1VDD2NC3CS4SCK5SDI6NC7NC14V OUTA13V REFA12VSS11V REFB10V OUTB9SHDN8LDACGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
1234567891011121314E=4.40mm · Pitch e=0.65mmD=5.00mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.40mm × 5.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (14/14)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3CSI/OMultiplexed I/O & Peripheral Pin CS (General)
4SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
5SDII/OMultiplexed I/O & Peripheral Pin SDI (General)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7NCI/OMultiplexed I/O & Peripheral Pin NC (General)
8LDACI/OMultiplexed I/O & Peripheral Pin LDAC (DAC)
9SHDNI/OMultiplexed I/O & Peripheral Pin SHDN (General)
10V OUTBI/OMultiplexed I/O & Peripheral Pin V OUTB (DAC)
11V REFBI/OMultiplexed I/O & Peripheral Pin V REFB (DAC)
12VSSGNDGround Reference Pin (VSS)
13V REFAI/OMultiplexed I/O & Peripheral Pin V REFA (DAC)
14V OUTAI/OMultiplexed I/O & Peripheral Pin V OUTA (DAC)
PIN 1 VDD
Power
Power Supply Input (VDD — 2.7V to 5.5V)
Design note: Supply Voltage Input (2.7V to 5.5V)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP4912T-E/ST (TSSOP-14) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP4912T-E/ST (TSSOP-14) - 2. Standard Pinout (Top View)
True package pinout (14 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP4912T-E/ST (TSSOP-14) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP4912T-E/ST (TSSOP-14) - 4. Package Dimensions (D×E×A)
TSSOP-14 · 4.40×5.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP4912T-E/ST (TSSOP-14) - 5. Recommended Land Pattern
IPC-7351B Footprint (14 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP4912T-E/ST (TSSOP-14) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MCP4912
P1 · p01_fig01EXACT PACKAGE
MCP4912T-E/ST (TSSOP-14) —  2010 Microchip Technology Inc. DS22250A-page 1
 2010 Microchip Technology Inc. DS22250A-page 1
P2 · p02_fig011503×1499px
MCP4912T-E/ST (TSSOP-14) — MCP4902/4912/4922 | Block Diagram | Op Amps | VDD | VSS | CS SDI SCK | Interface Logic | Input Register A Register B Input | DACA Register Register DACB | String DACB String DACA | Power-on Reset | VOUTA VOUTB | LDAC | Output Gain Logic | G
MCP4902/4912/4922 | Block Diagram | Op Amps | VDD | VSS | CS SDI SCK | Interface Logic | Input Register A Register B Input | DACA Register Register DACB | String DACB String DACA | Power-on Reset | VOUTA VOUTB | LDAC | Output Gain Logic | G
P27 · p27_fig011777×1283px
MCP4912T-E/ST (TSSOP-14) — FIGURE 6-1: Typical Connection Diagram. 6.3 Layout Considerations
FIGURE 6-1: Typical Connection Diagram. 6.3 Layout Considerations
P29 · p29_fig011780×1761px
MCP4912T-E/ST (TSSOP-14) — EXAMPLE 6-2: SINGLE-SUPPLY “WINDOW” DAC | VREF VDD | SPI | 3 | Vtrip R1 | R2 0.1 µF | Comparator R3 | VCC- | VCC+ VCC+ | VCC- | VOUT | R23 R2R3 R2 R3 + ------------------ = | V23 VCC+R2   VCC-R3   + R2 R3 + -----------------------------
EXAMPLE 6-2: SINGLE-SUPPLY “WINDOW” DAC | VREF VDD | SPI | 3 | Vtrip R1 | R2 0.1 µF | Comparator R3 | VCC- | VCC+ VCC+ | VCC- | VOUT | R23 R2R3 R2 R3 + ------------------ = | V23 VCC+R2   VCC-R3   + R2 R3 + -----------------------------
P29 · p29_fig01P29
MCP4912T-E/ST (TSSOP-14) — Datasheet Page 29 (p29_fig01)
Datasheet Page 29 (p29_fig01)
P30 · p30_fig011726×1556px
MCP4912T-E/ST (TSSOP-14) — EXAMPLE 6-3: DIGITALLY-CONTROLLED BIPOLAR VOLTAGE SOURCE | 6.5.1 DESIGN EXAMPLE: DESIGN A BIPOLAR DAC USING EXAMPLE 6-3 WITH 12-BIT MCP4922 OR MCP4921 | An output step magnitude of 1 mV with an output range of ±2.05V is desired for a partic
EXAMPLE 6-3: DIGITALLY-CONTROLLED BIPOLAR VOLTAGE SOURCE | 6.5.1 DESIGN EXAMPLE: DESIGN A BIPOLAR DAC USING EXAMPLE 6-3 WITH 12-BIT MCP4922 OR MCP4921 | An output step magnitude of 1 mV with an output range of ±2.05V is desired for a partic
P37 · p37_fig021777×755px
MCP4912T-E/ST (TSSOP-14) —  2010 Microchip Technology Inc. DS22250A-page 37 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
 2010 Microchip Technology Inc. DS22250A-page 37 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P37 · p37_fig02P37
MCP4912T-E/ST (TSSOP-14) — Datasheet Page 37 (p37_fig02)
Datasheet Page 37 (p37_fig02)
P37 · p37_fig01All Packages in PDF
MCP4912T-E/ST (TSSOP-14) — 8.1 Package Marking Information
8.1 Package Marking Information

Technical Specifications & Part Details (MCP4912T-E/ST)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP4912T-E/ST (TSSOP-14) is a 14-pin standard electronic & interconnect component featuring a 5.00 × 4.40 × 1.00 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.7V to 5.5V supply operation across -40°C to +125°C with integrated SPI, DAC interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 4.40 × 1.00 mm (A1=0.10 mm)
Package family: TSSOP (TSSOP-14)
Pin Count & Lead PitchN / e
14 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, DAC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol14 auto-grouped pins
OK
IPC-7351B Land Pattern14 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TSSOP-14)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 4.40 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.45 mm
Pins / Total PadsTopology
14P / 14Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TSSOP-14
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP4912T-E/ST (TSSOP-14)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP4912T-E/ST (TSSOP-14)?

Manufactured by MICROCHIP, the MCP4912T-E/ST is housed in a TSSOP-14 package with 14 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 2.7V to 5.5V)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 4 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)), 5 (SDI: Multiplexed I/O & Peripheral Pin SDI (General)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP4912T-E/ST?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP4912T-E/ST (TSSOP-14) has a nominal body envelope of 4.40 × 5.00 mm, pitch e = 0.65 mm, and 14 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP4912T-E/ST?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP4912T-E/ST (MICROCHIP, TSSOP-14) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (14 pins) & MCP4912 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
2NCNCSignal terminal NC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3CSDigital_IOSignal terminal CS (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
4SCKDigital_IOSignal terminal SCK (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
5SDIDigital_IOSignal terminal SDI (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDI. Supported peripheral buses: General.
6NCNCSignal terminal NC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7NCNCSignal terminal NC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
8LDACAnalogSignal terminal LDAC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: LDAC. Supported peripheral buses: DAC.
9SHDNDigital_IOSignal terminal SHDN (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SHDN. Supported peripheral buses: General.
10V OUTBDigital_IOSignal terminal V OUTB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V OUTB. Supported peripheral buses: DAC.
11V REFBDigital_IOSignal terminal V REFB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V REFB. Supported peripheral buses: DAC.
12VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
13V REFADigital_IOSignal terminal V REFA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V REFA. Supported peripheral buses: DAC.
14V OUTADigital_IOSignal terminal V OUTA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V OUTA. Supported peripheral buses: DAC.