MCP47FVB12A1T-E/ST (TSSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP47FVB12A1T-E/ST

MICROCHIPTSSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP47FVB12A1T-E/ST (TSSOP-8)1VDD2VREF3V OUT04V OUT18SDA7SCL6LAT/HVC5VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=4.40mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 4.40mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
2VREFI/OMultiplexed I/O & Peripheral Pin VREF (DAC)
3V OUT0I/OMultiplexed I/O & Peripheral Pin V OUT0 (DAC)
4V OUT1I/OMultiplexed I/O & Peripheral Pin V OUT1 (DAC)
5VSSGNDGround Reference Pin (VSS)
6LAT/HVCI/OMultiplexed I/O & Peripheral Pin LAT/HVC (DAC)
7SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
8SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
PIN 1 VDD
Power
Power Supply Input (VDD — 2.7V to 5.5V)
Design note: Supply Voltage pin
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP47FVB12A1T-E/ST (TSSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP47FVB12A1T-E/ST (TSSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP47FVB12A1T-E/ST (TSSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP47FVB12A1T-E/ST (TSSOP-8) - 4. Package Dimensions (D×E×A)
TSSOP-8 · 3.00×4.40mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP47FVB12A1T-E/ST (TSSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP47FVB12A1T-E/ST (TSSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for MCP47FVB22A2 / MCP47FVB12A1
P1 · p01_fig01377×200px
MCP47FVB12A1T-E/ST (TSSOP-8) — 8- /10- /12-Bit Single/Dual Voltage Output Volatile Digital-to-Analog Converters with I²C™ Interface
8- /10- /12-Bit Single/Dual Voltage Output Volatile Digital-to-Analog Converters with I²C™ Interface
P1 · p01_fig021783×1139px
MCP47FVB12A1T-E/ST (TSSOP-8) — The MCP47FVBXX are Single- and Dual-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to- Analog Converters (DAC) with volatile memory and an I2C serial interface.
The MCP47FVBXX are Single- and Dual-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to- Analog Converters (DAC) with volatile memory and an I2C serial interface.
P2 · p02_fig011646×1050px
MCP47FVB12A1T-E/ST (TSSOP-8) — Note 1: If Internal Band Gap is selected, this buffer has a 2x gain. If the G bit = ‘1’, this is a total gain of 4.
Note 1: If Internal Band Gap is selected, this buffer has a 2x gain. If the G bit = ‘1’, this is a total gain of 4.
P61 · p61_fig01867×623px
MCP47FVB12A1T-E/ST (TSSOP-8) — FIGURE 8-1: I2C Bus Connection Test.
FIGURE 8-1: I2C Bus Connection Test.
P62 · p62_fig011779×2058px
MCP47FVB12A1T-E/ST (TSSOP-8) — FIGURE 8-2: Example Circuit.
FIGURE 8-2: Example Circuit.
P62 · p62_fig01P62
MCP47FVB12A1T-E/ST (TSSOP-8) — Datasheet Page 62 (p62_fig01)
Datasheet Page 62 (p62_fig01)
P73 · p73_fig011777×2735px
MCP47FVB12A1T-E/ST (TSSOP-8) —  2015 Microchip Technology Inc. DS20005405A-page 73 | MCP47FVBXX | 10.0 PACKAGING INFORMATION | 10.1 Package Marking Information | 8-Lead TSSOP (4.4 mm) Example | AAAC E449 256 | Device Number Code Device Number Code | MCP47FVB01A0-E/ST AA
 2015 Microchip Technology Inc. DS20005405A-page 73 | MCP47FVBXX | 10.0 PACKAGING INFORMATION | 10.1 Package Marking Information | 8-Lead TSSOP (4.4 mm) Example | AAAC E449 256 | Device Number Code Device Number Code | MCP47FVB01A0-E/ST AA
P73 · p73_fig01P73
MCP47FVB12A1T-E/ST (TSSOP-8) — Datasheet Page 73 (p73_fig01)
Datasheet Page 73 (p73_fig01)

Technical Specifications & Part Details (MCP47FVB12A1T-E/ST)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP47FVB12A1T-E/ST (TSSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 4.40 × 1.20 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.7V to 5.5V supply operation across -40°C to +125°C with integrated I2C, DAC interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 4.40 × 1.20 mm (A1=0.10 mm)
Package family: TSSOP (TSSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C, DAC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TSSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 4.40 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.45 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TSSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP47FVB12A1T-E/ST (TSSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP47FVB12A1T-E/ST (TSSOP-8)?

Manufactured by MICROCHIP, the MCP47FVB12A1T-E/ST is housed in a TSSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 2.7V to 5.5V)), 2 (VREF: Multiplexed I/O & Peripheral Pin VREF (DAC)), 3 (V OUT0: Multiplexed I/O & Peripheral Pin V OUT0 (DAC)), 4 (V OUT1: Multiplexed I/O & Peripheral Pin V OUT1 (DAC)), 5 (VSS: Ground Reference Pin (VSS)), 6 (LAT/HVC: Multiplexed I/O & Peripheral Pin LAT/HVC (DAC)).

What are the IPC-7351B PCB Footprint dimensions for MCP47FVB12A1T-E/ST?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP47FVB12A1T-E/ST (TSSOP-8) has a nominal body envelope of 4.40 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP47FVB12A1T-E/ST?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP47FVB12A1T-E/ST (MICROCHIP, TSSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MCP47FVB22A2 / MCP47FVB12A1 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
2VREFAnalogSignal terminal VREF (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: VREF. Supported peripheral buses: DAC.
3V OUT0Digital_IOSignal terminal V OUT0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V OUT0. Supported peripheral buses: DAC.
4V OUT1Digital_IOSignal terminal V OUT1 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V OUT1. Supported peripheral buses: DAC.
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6LAT/HVCDigital_IOSignal terminal LAT/HVC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: LAT/HVC. Supported peripheral buses: DAC.
7SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
8SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: I2C_SERIAL. Supported peripheral buses: I2C.