MCP4011T-202E/MC (DFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP4011T-202E/MC

MICROCHIPDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP4011T-202E/MC (DFN-8-EP(2x3))1VDD2VSS3A4W5CS9EP8U/D7NC6BGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 1.8V to 5.5V)
2VSSGNDGround Reference Pin (VSS)
3AI/OMultiplexed I/O & Peripheral Pin A (General)
4WI/OMultiplexed I/O & Peripheral Pin W (General)
5CSI/OMultiplexed I/O & Peripheral Pin CS (General)
6BI/OMultiplexed I/O & Peripheral Pin B (General)
7NCI/OMultiplexed I/O & Peripheral Pin NC (General)
8U/DI/OMultiplexed I/O & Peripheral Pin U/D (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VDD
Power
Power Supply Input (VDD — 1.8V to 5.5V)
Design note: Positive Power Supply Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 20 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP4011T-202E/MC (DFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP4011T-202E/MC (DFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP4011T-202E/MC (DFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP4011T-202E/MC (DFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP4011T-202E/MC (DFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP4011T-202E/MC (DFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (20 figures · Page 1/2)
Showing 1–12 of 20 uncropped original figures for MCP4011 / MCP4014
P1 · p01_fig011777×646px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — 6 A
6 A
P1 · p01_fig02376×200px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — Low-Cost 64-Step Volatile Digital POT
Low-Cost 64-Step Volatile Digital POT
P1 · p01_fig031469×1252px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — MCP4011/2/3/4 MCP4011 MCP4012 MCP4013 MCP4014
MCP4011/2/3/4 MCP4011 MCP4012 MCP4013 MCP4014
P1 · p01_fig041009×1458px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — 2: Analog characteristics (resistor) tested from 2.7V to 5.5V.
2: Analog characteristics (resistor) tested from 2.7V to 5.5V.
P43 · p43_fig01867×1050px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — FIGURE 7-1: Typical Microcontroller Connections.
FIGURE 7-1: Typical Microcontroller Connections.
P44 · p44_fig011777×859px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — FIGURE 8-1: Using the Digital Potentiometer to Set a Precise Output Voltage. 8.1.1 TRIMMING A THRESHOLD FOR AN OPTICAL SENSOR
FIGURE 8-1: Using the Digital Potentiometer to Set a Precise Output Voltage. 8.1.1 TRIMMING A THRESHOLD FOR AN OPTICAL SENSOR
P44 · p44_fig02867×821px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — FIGURE 8-2: Set Point or Threshold Calibration. VTRIP VDD R2 RWB + R1 RAB R2 + + ----------------------------------     = RWB RAB D 63 -----      =
FIGURE 8-2: Set Point or Threshold Calibration. VTRIP VDD R2 RWB + R1 RAB R2 + + ----------------------------------     = RWB RAB D 63 -----      =
P44 · p44_fig031777×664px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — FIGURE 8-2: Set Point or Threshold Calibration. VTRIP VDD R2 RWB + R1 RAB R2 + + ----------------------------------     = RWB RAB D 63 -----      =
FIGURE 8-2: Set Point or Threshold Calibration. VTRIP VDD R2 RWB + R1 RAB R2 + + ----------------------------------     = RWB RAB D 63 -----      =
P45 · p45_fig011777×848px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — FIGURE 8-4: Trimming Offset and Gain in a Noninverting Amplifier.
FIGURE 8-4: Trimming Offset and Gain in a Noninverting Amplifier.
P45 · p45_fig021777×1031px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — FIGURE 8-4: Trimming Offset and Gain in a Noninverting Amplifier.
FIGURE 8-4: Trimming Offset and Gain in a Noninverting Amplifier.
P45 · p45_fig02P45
MCP4011T-202E/MC (DFN-8-EP(2x3)) — Datasheet Page 45 (p45_fig02)
Datasheet Page 45 (p45_fig02)
P61 · p61_fig011777×2515px
MCP4011T-202E/MC (DFN-8-EP(2x3)) — MCP4011/2/3/4 MCP4011 MCP4012 MCP4013 MCP4014
MCP4011/2/3/4 MCP4011 MCP4012 MCP4013 MCP4014
Page 1 / 2 (20 extracted figures)

Technical Specifications & Part Details (MCP4011T-202E/MC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP4011T-202E/MC (DFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 5.5V supply operation across 0°C to 70°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to 70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP4011 / MCP4014 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (DFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP4011T-202E/MC (DFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP4011T-202E/MC (DFN-8-EP(2x3))?

Manufactured by MICROCHIP, the MCP4011T-202E/MC is housed in a DFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 1.8V to 5.5V)), 2 (VSS: Ground Reference Pin (VSS)), 3 (A: Multiplexed I/O & Peripheral Pin A (General)), 4 (W: Multiplexed I/O & Peripheral Pin W (General)), 5 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 6 (B: Multiplexed I/O & Peripheral Pin B (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP4011T-202E/MC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP4011T-202E/MC (DFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP4011T-202E/MC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP4011T-202E/MC (MICROCHIP, DFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP4011 / MCP4014 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
2VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
3ADigital_IOSignal terminal A (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: A. Supported peripheral buses: General.
4WDigital_IOSignal terminal W (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: W. Supported peripheral buses: General.
5CSDigital_IOSignal terminal CS (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
6BDigital_IOSignal terminal B (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: B. Supported peripheral buses: General.
7NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
8U/DDigital_IOSignal terminal U/D (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: U/D. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.