MCP39F511-E/MQ (QFN-28-EP(5x5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP39F511-E/MQ

MICROCHIPQFN-28-EP(5x5) · 29 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP39F511-E/MQ (QFN-28-EP(5x5))1EVENT12NC3NC4UART_RX5COMMON A6OSCI7OSCO8NC9NC10RESET11AV DD12UART_TX13COMMON B14PWM15EVENT229EP28DR27D GND26MCLR25DV DD24D GND23REFIN+/OUT22ZCD21A GND20AN_IN19V1+18V1-17I1-16I1+Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=5.00mm · Pitch e=0.50mmD=5.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.00mm × 5.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1EVENT1I/OMultiplexed I/O & Peripheral Pin EVENT1 (General)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4UART_RXI/OMultiplexed I/O & Peripheral Pin UART_RX (UART)
5COMMON AI/OMultiplexed I/O & Peripheral Pin COMMON A (General)
6OSCII/OMultiplexed I/O & Peripheral Pin OSCI (RTC/CLK)
7OSCOI/OMultiplexed I/O & Peripheral Pin OSCO (RTC/CLK)
8NCI/OMultiplexed I/O & Peripheral Pin NC (General)
9NCI/OMultiplexed I/O & Peripheral Pin NC (General)
10RESETISystem Enable & Hardware Reset (RESET)
11AV DDI/OMultiplexed I/O & Peripheral Pin AV DD (General)
12UART_TXI/OMultiplexed I/O & Peripheral Pin UART_TX (UART)
13COMMON BI/OMultiplexed I/O & Peripheral Pin COMMON B (General)
14PWMI/OMultiplexed I/O & Peripheral Pin PWM (PWM)
15EVENT2I/OMultiplexed I/O & Peripheral Pin EVENT2 (General)
16I1+I/OMultiplexed I/O & Peripheral Pin I1+ (ADC)
17I1-I/OMultiplexed I/O & Peripheral Pin I1- (ADC)
18V1-I/OMultiplexed I/O & Peripheral Pin V1- (ADC)
19V1+I/OMultiplexed I/O & Peripheral Pin V1+ (ADC)
20AN_INI/OMultiplexed I/O & Peripheral Pin AN_IN (ADC)
21A GNDGNDGround Reference Pin (A GND)
22ZCDI/OMultiplexed I/O & Peripheral Pin ZCD (General)
23REFIN+/OUTI/OMultiplexed I/O & Peripheral Pin REFIN+/OUT (General)
24D GNDGNDGround Reference Pin (D GND)
25DV DDI/OMultiplexed I/O & Peripheral Pin DV DD (General)
26MCLRI/OMultiplexed I/O & Peripheral Pin MCLR (General)
27D GNDGNDGround Reference Pin (D GND)
28DRI/OMultiplexed I/O & Peripheral Pin DR (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 EVENT1
I/O
Multiplexed I/O & Peripheral Pin EVENT1 (General)
Design note: Event 1 Output pin
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP39F511-E/MQ (QFN-28-EP(5x5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP39F511-E/MQ (QFN-28-EP(5x5)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP39F511-E/MQ (QFN-28-EP(5x5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP39F511-E/MQ (QFN-28-EP(5x5)) - 4. Package Dimensions (D×E×A)
QFN-28-EP(5x5) · 5.00×5.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP39F511-E/MQ (QFN-28-EP(5x5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP39F511-E/MQ (QFN-28-EP(5x5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MCP39F511
P1 · p01_fig01377×200px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — Power-Monitoring IC with Calculation and Energy Accumulation
Power-Monitoring IC with Calculation and Energy Accumulation
P1 · p01_fig02871×1116px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — Package Types | 1 25 | 2 | 3 | 4 | 5 | 8 9 10 11 12 | 21 | 20 | 19 | 18 | 17 | 28 27 26 24 EVENT1 | NC | UART_RX | COMMONA | NC | NC | NC | AVDD | UART_TX | RESET | DVDD DGND | MCLR | EP 29 | 6 | 7 | OSCI | OSCO | 13 14 | COMMONB | PWM | 16
Package Types | 1 25 | 2 | 3 | 4 | 5 | 8 9 10 11 12 | 21 | 20 | 19 | 18 | 17 | 28 27 26 24 EVENT1 | NC | UART_RX | COMMONA | NC | NC | NC | AVDD | UART_TX | RESET | DVDD DGND | MCLR | EP 29 | 6 | 7 | OSCI | OSCO | 13 14 | COMMONB | PWM | 16
P2 · p02_fig011724×802px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — MCP39F511
MCP39F511
P3 · p03_fig011531×1916px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — MCP39F511
MCP39F511
P3 · p03_fig01P3
MCP39F511-E/MQ (QFN-28-EP(5x5)) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P53 · p53_fig011713×567px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — 28-Lead QFN (5x5x0.9 mm) Example
28-Lead QFN (5x5x0.9 mm) Example
P53 · p53_fig021777×751px
MCP39F511-E/MQ (QFN-28-EP(5x5)) —  2015 Microchip Technology Inc. DS20005393B-page 53 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-s
 2015 Microchip Technology Inc. DS20005393B-page 53 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-s
P53 · p53_fig01P53
MCP39F511-E/MQ (QFN-28-EP(5x5)) — Datasheet Page 53 (p53_fig01)
Datasheet Page 53 (p53_fig01)
P55 · p55_fig011777×2522px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — MCP39F511
MCP39F511
P56 · p56_fig011778×2735px
MCP39F511-E/MQ (QFN-28-EP(5x5)) — MCP39F511 | DS20005393B-page 56  2015 Microchip Technology Inc. | 28-Lead Plastic Quad Flat, No Lead Package (MQ) - 5x5 mm Body [QFN] Land Pattern With 0.55 mm Contact Length | Note: For the most current package drawings, please see the Mi
MCP39F511 | DS20005393B-page 56  2015 Microchip Technology Inc. | 28-Lead Plastic Quad Flat, No Lead Package (MQ) - 5x5 mm Body [QFN] Land Pattern With 0.55 mm Contact Length | Note: For the most current package drawings, please see the Mi
P56 · p56_fig01P56
MCP39F511-E/MQ (QFN-28-EP(5x5)) — Datasheet Page 56 (p56_fig01)
Datasheet Page 56 (p56_fig01)

Technical Specifications & Part Details (MCP39F511-E/MQ)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP39F511-E/MQ (QFN-28-EP(5x5)) is a 28-pin standard electronic & interconnect component featuring a 5.00 × 5.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +125°C with integrated UART, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 5.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-28-EP(5x5))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.25×3.25mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-28-EP(5x5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-28-EP(5x5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP39F511-E/MQ (QFN-28-EP(5x5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP39F511-E/MQ (QFN-28-EP(5x5))?

Manufactured by MICROCHIP, the MCP39F511-E/MQ is housed in a QFN-28-EP(5x5) package with 29 pins and a 0.50 mm lead pitch. Key pins include: 1 (EVENT1: Multiplexed I/O & Peripheral Pin EVENT1 (General)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (UART_RX: Multiplexed I/O & Peripheral Pin UART_RX (UART)), 5 (COMMON A: Multiplexed I/O & Peripheral Pin COMMON A (General)), 6 (OSCI: Multiplexed I/O & Peripheral Pin OSCI (RTC/CLK)).

What are the IPC-7351B PCB Footprint dimensions for MCP39F511-E/MQ?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP39F511-E/MQ (QFN-28-EP(5x5)) has a nominal body envelope of 5.00 × 5.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 3.25 × 3.25 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP39F511-E/MQ?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP39F511-E/MQ (MICROCHIP, QFN-28-EP(5x5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & MCP39F511 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1EVENT1Digital_IOSignal terminal EVENT1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: EVENT1. Supported peripheral buses: General.
2NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4UART_RXDigital_IOSignal terminal UART_RX (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: UART_RX. Supported peripheral buses: UART.
5COMMON ADigital_IOSignal terminal COMMON A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: COMMON A. Supported peripheral buses: General.
6OSCIDigital_IOSignal terminal OSCI (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OSCI. Supported peripheral buses: RTC/CLK.
7OSCODigital_IOSignal terminal OSCO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OSCO. Supported peripheral buses: RTC/CLK.
8NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
9NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
10RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
11AV DDDigital_IOSignal terminal AV DD (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: AV DD. Supported peripheral buses: General.
12UART_TXDigital_IOSignal terminal UART_TX (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: UART_TX. Supported peripheral buses: UART.
13COMMON BDigital_IOSignal terminal COMMON B (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: COMMON B. Supported peripheral buses: General.
14PWMDigital_IOSignal terminal PWM (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PWM. Supported peripheral buses: PWM.
15EVENT2Digital_IOSignal terminal EVENT2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: EVENT2. Supported peripheral buses: General.
16I1+Digital_IOSignal terminal I1+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: I1+. Supported peripheral buses: ADC.
17I1-Digital_IOSignal terminal I1- (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: I1-. Supported peripheral buses: ADC.
18V1-Digital_IOSignal terminal V1- (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V1-. Supported peripheral buses: ADC.
19V1+Digital_IOSignal terminal V1+ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V1+. Supported peripheral buses: ADC.
20AN_INDigital_IOSignal terminal AN_IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: AN_IN. Supported peripheral buses: ADC.
21A GNDGND0V electrical ground return terminal (A GND) for internal core logic, I/O drivers, and analog sub-blocks.
22ZCDDigital_IOSignal terminal ZCD (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ZCD. Supported peripheral buses: General.
23REFIN+/OUTDigital_IOSignal terminal REFIN+/OUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: REFIN+/OUT. Supported peripheral buses: General.
24D GNDGND0V electrical ground return terminal (D GND) for internal core logic, I/O drivers, and analog sub-blocks.
25DV DDDigital_IOSignal terminal DV DD (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DV DD. Supported peripheral buses: General.
26MCLRDigital_IOSignal terminal MCLR (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MCLR. Supported peripheral buses: General.
27D GNDGND0V electrical ground return terminal (D GND) for internal core logic, I/O drivers, and analog sub-blocks.
28DRDigital_IOSignal terminal DR (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DR. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.