MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP33121D-10-I/MN

MICROCHIPTDFN-10-EP(3x3) · 11 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP33121D-10-I/MN (TDFN-10-EP(3x3))1VREF2AVDD3AIN+4AIN-5GND6CNVST11EP10DVIO9SDI8SCLK7SDOGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1234567891011E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VREFAnalogMultiplexed I/O & Peripheral Pin VREF (General)
2AVDDPowerPower Supply Input (AVDD — 3.3V / 5.0V Standard Logic)
3AIN+AnalogMultiplexed I/O & Peripheral Pin AIN+ (General)
4AIN-AnalogMultiplexed I/O & Peripheral Pin AIN- (General)
5GNDGNDGround Reference Pin (GND)
6CNVSTI/OMultiplexed I/O & Peripheral Pin CNVST (General)
7SDOI/OMultiplexed I/O & Peripheral Pin SDO (General)
8SCLKI/OMultiplexed I/O & Peripheral Pin SCLK (SPI, I2C)
9SDII/OMultiplexed I/O & Peripheral Pin SDI (General)
10DVIOI/OMultiplexed I/O & Peripheral Pin DVIO (General)
11EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VREF
Analog
Multiplexed I/O & Peripheral Pin VREF (General)
Design note: Signal terminal VREF (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) - 4. Package Dimensions (D×E×A)
TDFN-10-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for MCP33121
P1 · p01_fig011904×2447px
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — © 2016 Littelfuse,Inc Littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016
© 2016 Littelfuse,Inc Littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016
P1 · p01_fig02471×159px
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — Specification Status: Released
Specification Status: Released
P1 · p01_fig031033×549px
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — PDF Figure p01_fig03 (Page 1 — OTHER_DIAGRAM)
PDF Figure p01_fig03 (Page 1 — OTHER_DIAGRAM)
P1 · p01_fig04710×295px
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — Maximum Electrical Rating Voltage: 60VDC Short Circuit Current: 10A Notes: 1. All terminations are tin plated. 2. Drawing not to scale Marking:
Maximum Electrical Rating Voltage: 60VDC Short Circuit Current: 10A Notes: 1. All terminations are tin plated. 2. Drawing not to scale Marking:
P2 · p02_fig011904×2447px
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — © 2016 Littelfuse,Inc Littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016
© 2016 Littelfuse,Inc Littelfuse.com Specifications are subject to change without notice. Revised July 26, 2016
P2 · p02_fig02471×158px
MCP33121D-10-I/MN (TDFN-10-EP(3x3)) — PolySwitch® PTC Devices Overcurrent Protection Device
PolySwitch® PTC Devices Overcurrent Protection Device

Technical Specifications & Part Details (MCP33121D-10-I/MN)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP33121D-10-I/MN (TDFN-10-EP(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated I2C, SPI interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (TDFN-10-EP(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C, SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×1.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP33121 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TDFN-10-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-10-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP33121D-10-I/MN (TDFN-10-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP33121D-10-I/MN (TDFN-10-EP(3x3))?

Manufactured by MICROCHIP, the MCP33121D-10-I/MN is housed in a TDFN-10-EP(3x3) package with 11 pins and a 0.50 mm lead pitch. Key pins include: 1 (VREF: Multiplexed I/O & Peripheral Pin VREF (General)), 2 (AVDD: Power Supply Input (AVDD — 3.3V / 5.0V Standard Logic)), 3 (AIN+: Multiplexed I/O & Peripheral Pin AIN+ (General)), 4 (AIN-: Multiplexed I/O & Peripheral Pin AIN- (General)), 5 (GND: Ground Reference Pin (GND)), 6 (CNVST: Multiplexed I/O & Peripheral Pin CNVST (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP33121D-10-I/MN?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP33121D-10-I/MN (TDFN-10-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 1.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP33121D-10-I/MN?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP33121D-10-I/MN (MICROCHIP, TDFN-10-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & MCP33121 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VREFAnalogSignal terminal VREF (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF. Supported peripheral buses: General.
2AVDDPower_InPrimary positive power supply input (AVDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
3AIN+AnalogSignal terminal AIN+ (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: AIN+. Supported peripheral buses: General.
4AIN-AnalogSignal terminal AIN- (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: AIN-. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6CNVSTDigital_IOSignal terminal CNVST (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CNVST. Supported peripheral buses: General.
7SDODigital_IOSignal terminal SDO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SDO. Supported peripheral buses: General.
8SCLKDigital_IOSignal terminal SCLK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SCLK. Supported peripheral buses: SPI, I2C.
9SDIDigital_IOSignal terminal SDI (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SDI. Supported peripheral buses: General.
10DVIODigital_IOSignal terminal DVIO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DVIO. Supported peripheral buses: General.
11EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.