MCP1812AT-028/7QX (UQFN-4(1x1)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP1812AT-028/7QX

MICROCHIPUQFN-4(1x1) · 4 Pins · Pitch 0.65mmPURE PDF IPC73515.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP1812AT-028/7QX (UQFN-4(1x1))1V OUT2GND4V IN3SHDNGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
1234E=2.20mm · Pitch e=0.65mmD=2.20mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.20mm × 2.20mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (4/4)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
2GNDGNDGround Reference Pin (GND)
3SHDNI/OMultiplexed I/O & Peripheral Pin SHDN (General)
4V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
PIN 1 V OUT
I/O
Multiplexed I/O & Peripheral Pin V OUT (General)
Design note: Regulated Output Voltage V R
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 16 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP1812AT-028/7QX (UQFN-4(1x1)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP1812AT-028/7QX (UQFN-4(1x1)) - 2. Standard Pinout (Top View)
True package pinout (4 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP1812AT-028/7QX (UQFN-4(1x1)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP1812AT-028/7QX (UQFN-4(1x1)) - 4. Package Dimensions (D×E×A)
UQFN-4(1x1) · 2.20×2.20mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP1812AT-028/7QX (UQFN-4(1x1)) - 5. Recommended Land Pattern
IPC-7351B Footprint (4 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP1812AT-028/7QX (UQFN-4(1x1)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (16 figures · Page 1/2)
Showing 1–12 of 16 uncropped original figures for MCP1812
P1 · p01_fig01376×200px
MCP1812AT-028/7QX (UQFN-4(1x1)) — Ultra-Low Quiescent Current LDO Regulator
Ultra-Low Quiescent Current LDO Regulator
P2 · p02_fig03422×413px
MCP1812AT-028/7QX (UQFN-4(1x1)) — EP* | 5 | 4-Lead 1x1 mm UDFN | 4 3 | 1 2 | VIN SHDN | VOUT GND * Includes Exposed Thermal Pad (see Table 3-1).
EP* | 5 | 4-Lead 1x1 mm UDFN | 4 3 | 1 2 | VIN SHDN | VOUT GND * Includes Exposed Thermal Pad (see Table 3-1).
P3 · p03_fig011247×587px
MCP1812AT-028/7QX (UQFN-4(1x1)) — Typical Application
Typical Application
P3 · p03_fig021777×995px
MCP1812AT-028/7QX (UQFN-4(1x1)) — Device Description
Device Description
P22 · p22_fig011777×1135px
MCP1812AT-028/7QX (UQFN-4(1x1)) — FIGURE 5-1: Typical Application Circuit. 5.2 Power Calculations 5.2.1 POWER DISSIPATION
FIGURE 5-1: Typical Application Circuit. 5.2 Power Calculations 5.2.1 POWER DISSIPATION
P22 · p22_fig021777×906px
MCP1812AT-028/7QX (UQFN-4(1x1)) — FIGURE 5-1: Typical Application Circuit. 5.2 Power Calculations 5.2.1 POWER DISSIPATION
FIGURE 5-1: Typical Application Circuit. 5.2 Power Calculations 5.2.1 POWER DISSIPATION
P22 · p22_fig01P22
MCP1812AT-028/7QX (UQFN-4(1x1)) — Datasheet Page 22 (p22_fig01)
Datasheet Page 22 (p22_fig01)
P24 · p24_fig011777×2726px
MCP1812AT-028/7QX (UQFN-4(1x1)) — MCP1811A/11B/12A/12B | DS20006088C-page 24  2018-2020 Microchip Technology Inc. | 6.0 PACKAGING INFORMATION | 6.1 Package Marking Information | Part Number Code | MCP1811AT-010/TT AADNNN | MCP1811AT-012/TT AAHNNN | MCP1811AT-018/TT AAMNNN
MCP1811A/11B/12A/12B | DS20006088C-page 24  2018-2020 Microchip Technology Inc. | 6.0 PACKAGING INFORMATION | 6.1 Package Marking Information | Part Number Code | MCP1811AT-010/TT AADNNN | MCP1811AT-012/TT AAHNNN | MCP1811AT-018/TT AAMNNN
P24 · p24_fig01P24
MCP1812AT-028/7QX (UQFN-4(1x1)) — Datasheet Page 24 (p24_fig01)
Datasheet Page 24 (p24_fig01)
P33 · p33_fig01824×923px
MCP1812AT-028/7QX (UQFN-4(1x1)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P33 · p33_fig01P33
MCP1812AT-028/7QX (UQFN-4(1x1)) — Datasheet Page 33 (p33_fig01)
Datasheet Page 33 (p33_fig01)
P40 · p40_fig011778×2491px
MCP1812AT-028/7QX (UQFN-4(1x1)) — DS20006088C-page 40  2018-2020 Microchip Technology Inc. | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | REF: Reference Dimension, usually with
DS20006088C-page 40  2018-2020 Microchip Technology Inc. | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | REF: Reference Dimension, usually with
Page 1 / 2 (16 extracted figures)

Technical Specifications & Part Details (MCP1812AT-028/7QX)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP1812AT-028/7QX (UQFN-4(1x1)) is a 4-pin standard electronic & interconnect component featuring a 2.20 × 2.20 × 0.60 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V to 5.5V supply operation across -55°C to +150°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.20 × 2.20 × 0.60 mm (A1=0.03 mm)
Package family: QFN (UQFN-4(1x1))
Pin Count & Lead PitchN / e
4 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol4 auto-grouped pins
OK
IPC-7351B Land Pattern4 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP1812 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (UQFN-4(1x1))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.20 × 2.20 mm
Height (A) & Pitch (e)IPC-7351B
A=0.60mm · e=0.65mm
Pad Size (W × L)Level B
0.50 × 0.85 mm
Pins / Total PadsTopology
4P / 4Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UQFN-4(1x1)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP1812AT-028/7QX (UQFN-4(1x1))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP1812AT-028/7QX (UQFN-4(1x1))?

Manufactured by MICROCHIP, the MCP1812AT-028/7QX is housed in a UQFN-4(1x1) package with 4 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)), 2 (GND: Ground Reference Pin (GND)), 3 (SHDN: Multiplexed I/O & Peripheral Pin SHDN (General)), 4 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP1812AT-028/7QX?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP1812AT-028/7QX (UQFN-4(1x1)) has a nominal body envelope of 2.20 × 2.20 mm, pitch e = 0.65 mm, and 4 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP1812AT-028/7QX?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP1812AT-028/7QX (MICROCHIP, UQFN-4(1x1)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (4 pins) & MCP1812 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V OUTDigital_IOSignal terminal V OUT (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3SHDNDigital_IOSignal terminal SHDN (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SHDN. Supported peripheral buses: General.
4V INDigital_IOSignal terminal V IN (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.