MCP1623-I/MC (DFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP1623-I/MC

MICROCHIPDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP1623-I/MC (DFN-8-EP(2x3))1FB2S GND3P GND4EN5SW9EP8V IN7V OUTS6V OUTPGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1FBI/OMultiplexed I/O & Peripheral Pin FB (General)
2S GNDGNDGround Reference Pin (S GND)
3P GNDGNDGround Reference Pin (P GND)
4ENISystem Enable & Hardware Reset (EN)
5SWI/OMultiplexed I/O & Peripheral Pin SW (General)
6V OUTPI/OMultiplexed I/O & Peripheral Pin V OUTP (General)
7V OUTSI/OMultiplexed I/O & Peripheral Pin V OUTS (General)
8V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 FB
I/O
Multiplexed I/O & Peripheral Pin FB (General)
Design note: Feedback Voltage Pin
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP1623-I/MC (DFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP1623-I/MC (DFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP1623-I/MC (DFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP1623-I/MC (DFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP1623-I/MC (DFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP1623-I/MC (DFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for MCP1623
P1 · p01_fig01377×200px
MCP1623-I/MC (DFN-8-EP(2x3)) — Low-Voltage Input Boost Regulator
Low-Voltage Input Boost Regulator
P2 · p02_fig011391×672px
MCP1623-I/MC (DFN-8-EP(2x3)) — FIGURE 1: Typical Application Circuit.
FIGURE 1: Typical Application Circuit.
P2 · p02_fig021297×835px
MCP1623-I/MC (DFN-8-EP(2x3)) — FIGURE 2: MCP1624 Efficiency vs. IOUT, VOUT = 3.3V.
FIGURE 2: MCP1624 Efficiency vs. IOUT, VOUT = 3.3V.
P2 · p02_fig01P2
MCP1623-I/MC (DFN-8-EP(2x3)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P15 · p15_fig011778×514px
MCP1623-I/MC (DFN-8-EP(2x3)) —  2010-2016 Microchip Technology Inc. DS40001420D-page 15 | Table 5-1 contains the recommended range for the input and output capacitor value. | TABLE 5-1: CAPACITOR VALUE RANGE | CIN COUT | Min. 4.7 µF 10 µF | Max. - 100 µF
 2010-2016 Microchip Technology Inc. DS40001420D-page 15 | Table 5-1 contains the recommended range for the input and output capacitor value. | TABLE 5-1: CAPACITOR VALUE RANGE | CIN COUT | Min. 4.7 µF 10 µF | Max. - 100 µF
P17 · p17_fig011162×689px
MCP1623-I/MC (DFN-8-EP(2x3)) — FIGURE 5-1: MCP1623/24 SOT-23-6 Recommended Layout.
FIGURE 5-1: MCP1623/24 SOT-23-6 Recommended Layout.
P17 · p17_fig01P17
MCP1623-I/MC (DFN-8-EP(2x3)) — Datasheet Page 17 (p17_fig01)
Datasheet Page 17 (p17_fig01)
P19 · p19_fig041777×1489px
MCP1623-I/MC (DFN-8-EP(2x3)) — 8-Lead DFN (2x3x0.9 mm) Example
8-Lead DFN (2x3x0.9 mm) Example
P19 · p19_fig05269×423px
MCP1623-I/MC (DFN-8-EP(2x3)) — 8-Lead DFN (2x3x0.9 mm) Example
8-Lead DFN (2x3x0.9 mm) Example
P19 · p19_fig06269×423px
MCP1623-I/MC (DFN-8-EP(2x3)) — 8-Lead DFN (2x3x0.9 mm) Example
8-Lead DFN (2x3x0.9 mm) Example
P19 · p19_fig04P19
MCP1623-I/MC (DFN-8-EP(2x3)) — Datasheet Page 19 (p19_fig04)
Datasheet Page 19 (p19_fig04)
P1 · p01_fig02All Packages in PDF
MCP1623-I/MC (DFN-8-EP(2x3)) — Output voltage is set by a small external resistor divider.
Output voltage is set by a small external resistor divider.
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (MCP1623-I/MC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP1623-I/MC (DFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.0V to 5.5V supply operation across -65°C to +150°C with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
500 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
19 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.40×1.30mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP1623-I/MC (DFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP1623-I/MC (DFN-8-EP(2x3))?

Manufactured by MICROCHIP, the MCP1623-I/MC is housed in a DFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.0V to 5.5V. Key pins include: 1 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 2 (S GND: Ground Reference Pin (S GND)), 3 (P GND: Ground Reference Pin (P GND)), 4 (EN: System Enable & Hardware Reset (EN)), 5 (SW: Multiplexed I/O & Peripheral Pin SW (General)), 6 (V OUTP: Multiplexed I/O & Peripheral Pin V OUTP (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP1623-I/MC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP1623-I/MC (DFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.40 × 1.30 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP1623-I/MC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP1623-I/MC (MICROCHIP, DFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP1623 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1FBDigital_IOSignal terminal FB (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
2S GNDGND0V electrical ground return terminal (S GND) for internal core logic, I/O drivers, and analog sub-blocks.
3P GNDGND0V electrical ground return terminal (P GND) for internal core logic, I/O drivers, and analog sub-blocks.
4ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
5SWDigital_IOSignal terminal SW (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
6V OUTPDigital_IOSignal terminal V OUTP (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: V OUTP. Supported peripheral buses: General.
7V OUTSDigital_IOSignal terminal V OUTS (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: V OUTS. Supported peripheral buses: General.
8V INDigital_IOSignal terminal V IN (I/O, 2.0V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.