MCP14628T-E/MF (TDFN-8-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP14628T-E/MF

MICROCHIPTDFN-8-EP(3x3) · 9 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP14628T-E/MF (TDFN-8-EP(3x3))1HIGHDR2BOOT3PWM4GND5LOWDR9EP8PHASE7FCCM6V CCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=3.00mm · Pitch e=0.65mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1HIGHDRI/OMultiplexed I/O & Peripheral Pin HIGHDR (General)
2BOOTI/OMultiplexed I/O & Peripheral Pin BOOT (General)
3PWMI/OMultiplexed I/O & Peripheral Pin PWM (PWM)
4GNDGNDGround Reference Pin (GND)
5LOWDRI/OMultiplexed I/O & Peripheral Pin LOWDR (General)
6V CCI/OMultiplexed I/O & Peripheral Pin V CC (General)
7FCCMI/OMultiplexed I/O & Peripheral Pin FCCM (General)
8PHASEI/OMultiplexed I/O & Peripheral Pin PHASE (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 HIGHDR
I/O
Multiplexed I/O & Peripheral Pin HIGHDR (General)
Design note: High-side Gate Driver Pin
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP14628T-E/MF (TDFN-8-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP14628T-E/MF (TDFN-8-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP14628T-E/MF (TDFN-8-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP14628T-E/MF (TDFN-8-EP(3x3)) - 4. Package Dimensions (D×E×A)
TDFN-8-EP(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP14628T-E/MF (TDFN-8-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP14628T-E/MF (TDFN-8-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MCP14628
P1 · p01_fig01836×556px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — Note 1: Exposed pad on the DFN is electrically isolated.
Note 1: Exposed pad on the DFN is electrically isolated.
P1 · p01_fig02724×465px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — Note 1: Exposed pad on the DFN is electrically isolated.
Note 1: Exposed pad on the DFN is electrically isolated.
P2 · p02_fig011714×1326px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig021777×1184px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — DS22083A-page 2 © 2008 Microchip Technology Inc. | Functional Block Diagram | BOOT | HIGHDR | PHASE | LOWDR | VCC | FCCM | PWM | GND | VCC | R | R | Level Shift | Control Logic & Protection
DS22083A-page 2 © 2008 Microchip Technology Inc. | Functional Block Diagram | BOOT | HIGHDR | PHASE | LOWDR | VCC | FCCM | PWM | GND | VCC | R | R | Level Shift | Control Logic & Protection
P2 · p02_fig01P2
MCP14628T-E/MF (TDFN-8-EP(3x3)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P11 · p11_fig011777×1666px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — 5.4 PCB Layout
5.4 PCB Layout
P11 · p11_fig01P11
MCP14628T-E/MF (TDFN-8-EP(3x3)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P13 · p13_fig011447×981px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — MCP14628
MCP14628
P13 · p13_fig021777×769px
MCP14628T-E/MF (TDFN-8-EP(3x3)) — © 2008 Microchip Technology Inc. DS22083A-page 13 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2008 Microchip Technology Inc. DS22083A-page 13 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P13 · p13_fig01P13
MCP14628T-E/MF (TDFN-8-EP(3x3)) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)

Technical Specifications & Part Details (MCP14628T-E/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP14628T-E/MF (TDFN-8-EP(3x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.80 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +125°C with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
2A
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (TDFN-8-EP(3x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 2.40×1.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TDFN-8-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.84 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-8-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP14628T-E/MF (TDFN-8-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP14628T-E/MF (TDFN-8-EP(3x3))?

Manufactured by MICROCHIP, the MCP14628T-E/MF is housed in a TDFN-8-EP(3x3) package with 9 pins and a 0.65 mm lead pitch. Key pins include: 1 (HIGHDR: Multiplexed I/O & Peripheral Pin HIGHDR (General)), 2 (BOOT: Multiplexed I/O & Peripheral Pin BOOT (General)), 3 (PWM: Multiplexed I/O & Peripheral Pin PWM (PWM)), 4 (GND: Ground Reference Pin (GND)), 5 (LOWDR: Multiplexed I/O & Peripheral Pin LOWDR (General)), 6 (V CC: Multiplexed I/O & Peripheral Pin V CC (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP14628T-E/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP14628T-E/MF (TDFN-8-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 2.40 × 1.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP14628T-E/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP14628T-E/MF (MICROCHIP, TDFN-8-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP14628 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1HIGHDRDigital_IOSignal terminal HIGHDR (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: HIGHDR. Supported peripheral buses: General.
2BOOTDigital_IOSignal terminal BOOT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BOOT. Supported peripheral buses: General.
3PWMDigital_IOSignal terminal PWM (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PWM. Supported peripheral buses: PWM.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5LOWDRDigital_IOSignal terminal LOWDR (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: LOWDR. Supported peripheral buses: General.
6V CCDigital_IOSignal terminal V CC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V CC. Supported peripheral buses: General.
7FCCMDigital_IOSignal terminal FCCM (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: FCCM. Supported peripheral buses: General.
8PHASEDigital_IOSignal terminal PHASE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PHASE. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.