MCP102T-315E/LB (SC-70-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP102T-315E/LB

MICROCHIPSC-70-3 · 3 Pins · Pitch 1.30mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP102T-315E/LB (SC-70-3)1RST2VDD3VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123E=2.00mm · Pitch e=1.30mmD=1.25mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 1.25mm · Pitch: 1.30mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (3/3)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RSTI/OMultiplexed I/O & Peripheral Pin RST (General)
2VDDPowerPower Supply Input (VDD — 6V to 13.5V)
3VSSGNDGround Reference Pin (VSS)
PIN 1 RST
I/O
Multiplexed I/O & Peripheral Pin RST (General)
Design note: Output State V Falling: DD H = V > VDD TRIP L = V < VDD TRIP V Rising: DD H = V > V + VDD TRIP HYS L = V < V + VDD TRIP HYS
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP102T-315E/LB (SC-70-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP102T-315E/LB (SC-70-3) - 2. Standard Pinout (Top View)
True package pinout (3 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP102T-315E/LB (SC-70-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP102T-315E/LB (SC-70-3) - 4. Package Dimensions (D×E×A)
SC-70-3 · 2.00×1.25mm · Pitch 1.30mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP102T-315E/LB (SC-70-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (3 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP102T-315E/LB (SC-70-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MCP102 / MCP103
P1 · p01_fig01377×200px
MCP102T-315E/LB (SC-70-3) — Micropower Voltage Supervisors
Micropower Voltage Supervisors
P1 · p01_fig02867×1311px
MCP102T-315E/LB (SC-70-3) — Band Gap Reference
Band Gap Reference
P1 · p01_fig03869×673px
MCP102T-315E/LB (SC-70-3) — 2
2
P13 · p13_fig011789×1595px
MCP102T-315E/LB (SC-70-3) — FIGURE 4-2: RST Operation as Determined by the VTRIP and VHYS.
FIGURE 4-2: RST Operation as Determined by the VTRIP and VHYS.
P13 · p13_fig01P13
MCP102T-315E/LB (SC-70-3) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)
P14 · p14_fig011777×1121px
MCP102T-315E/LB (SC-70-3) — FIGURE 4-4: Reset Power-up Timer Waveform. 4.3.1 EFFECT OF TEMPERATURE ON RESET POWER-UP TIMER (TRPU)
FIGURE 4-4: Reset Power-up Timer Waveform. 4.3.1 EFFECT OF TEMPERATURE ON RESET POWER-UP TIMER (TRPU)
P15 · p15_fig01874×787px
MCP102T-315E/LB (SC-70-3) — FIGURE 4-5: Typical Application Circuit for PIC® Microcontroller with the ICSP™ Feature.
FIGURE 4-5: Typical Application Circuit for PIC® Microcontroller with the ICSP™ Feature.
P16 · p16_fig01All Packages in PDF
MCP102T-315E/LB (SC-70-3) — MCP102/103/121/131 | DS20001906D-page 16  2004-2014 Microchip Technology Inc. | 5.0 PACKAGING INFORMATION | 5.1 Package Marking Information | 3-Lead TO-92 Example | Note: In the event the full Microchip part number cannot be marked on one
MCP102/103/121/131 | DS20001906D-page 16  2004-2014 Microchip Technology Inc. | 5.0 PACKAGING INFORMATION | 5.1 Package Marking Information | 3-Lead TO-92 Example | Note: In the event the full Microchip part number cannot be marked on one
P16 · p16_fig02All Packages in PDF
MCP102T-315E/LB (SC-70-3) — 3-Lead SOT-23 Part Number MCP1xx =
3-Lead SOT-23 Part Number MCP1xx =
P16 · p16_fig03All Packages in PDF
MCP102T-315E/LB (SC-70-3) — 3-Lead SC70
3-Lead SC70

Technical Specifications & Part Details (MCP102T-315E/LB)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP102T-315E/LB (SC-70-3) is a 3-pin standard electronic & interconnect component featuring a 2.00 × 1.25 × 0.95 mm mechanical envelope (lead pitch e = 1.30 mm). Rated for 6V to 13.5V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
6V to 13.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
1.75 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 1.25 × 0.95 mm (A1=0.06 mm)
Package family: SOT23 (SC-70-3)
Pin Count & Lead PitchN / e
3 Pins | Pitch e = 1.30 mm (51.2 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol3 auto-grouped pins
OK
IPC-7351B Land Pattern3 pads · Pitch 1.30mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP102 / MCP103 (5)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SC-70-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 1.25 mm
Height (A) & Pitch (e)IPC-7351B
A=0.95mm · e=1.30mm
Pad Size (W × L)Level B
0.42 × 0.85 mm
Pins / Total PadsTopology
3P / 3Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SC-70-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP102T-315E/LB (SC-70-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP102T-315E/LB (SC-70-3)?

Manufactured by MICROCHIP, the MCP102T-315E/LB is housed in a SC-70-3 package with 3 pins and a 1.30 mm lead pitch, supporting a VCC supply range of 6V to 13.5V. Key pins include: 1 (RST: Multiplexed I/O & Peripheral Pin RST (General)), 2 (VDD: Power Supply Input (VDD — 6V to 13.5V)), 3 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for MCP102T-315E/LB?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP102T-315E/LB (SC-70-3) has a nominal body envelope of 1.25 × 2.00 mm, pitch e = 1.30 mm, and 3 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP102T-315E/LB?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP102T-315E/LB (MICROCHIP, SC-70-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (3 pins) & MCP102 / MCP103 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RSTDigital_IOSignal terminal RST (I/O, 6V to 13.5V domain). Multiplexed alternate functions: RST. Supported peripheral buses: General.
2VDDPower_InPrimary positive power supply input (VDD) operating in the 6V to 13.5V domain (Max rating: 13.5V).
3VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.