JAN1N6472US (MELF-G(D-5C)) — Symbol, Footprint IPC-7351B & 3D STEP Model

JAN1N6472US

MICROCHIPMELF-G(D-5C) · 2 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · JAN1N6472US (MELF-G(D-5C))1C2AGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12E=5.80mm · Pitch e=0.50mmD=4.90mm-6-5-4-3-2-1012345643210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 5.80mm × 4.90mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (2/2)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CI/OMultiplexed I/O & Peripheral Pin C (General)
2AI/OMultiplexed I/O & Peripheral Pin A (General)
PIN 1 C
I/O
Multiplexed I/O & Peripheral Pin C (General)
Design note: Signal terminal C (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: C. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 16 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
JAN1N6472US (MELF-G(D-5C)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
JAN1N6472US (MELF-G(D-5C)) - 2. Standard Pinout (Top View)
True package pinout (2 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
JAN1N6472US (MELF-G(D-5C)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
JAN1N6472US (MELF-G(D-5C)) - 4. Package Dimensions (D×E×A)
MELF-G(D-5C) · 5.80×4.90mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
JAN1N6472US (MELF-G(D-5C)) - 5. Recommended Land Pattern
IPC-7351B Footprint (2 Pads)Expand ›
6. Application SchematicSCHEMATIC
JAN1N6472US (MELF-G(D-5C)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (16 figures · Page 1/2)
Showing 1–12 of 16 uncropped original figures for JAN1N6472US
P1 · p01_fig012106×2310px
JAN1N6472US (MELF-G(D-5C)) — Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors | WWW.Microsemi . | S C O T T S D A L E D I V I S I O N | COM | 1N6469US thru 1N6476US | 1N6469US - 1N6476US | Package “G” (or “D-5C”) | IMPORTANT: For the most
Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors | WWW.Microsemi . | S C O T T S D A L E D I V I S I O N | COM | 1N6469US thru 1N6476US | 1N6469US - 1N6476US | Package “G” (or “D-5C”) | IMPORTANT: For the most
P1 · p01_fig02732×166px
JAN1N6472US (MELF-G(D-5C)) — S C O T T S D A L E D I V I S I O N
S C O T T S D A L E D I V I S I O N
P1 · p01_fig03347×270px
JAN1N6472US (MELF-G(D-5C)) — COM
COM
P1 · p01_fig03P1
JAN1N6472US (MELF-G(D-5C)) — Datasheet Page 1 (p01_fig03)
Datasheet Page 1 (p01_fig03)
P2 · p02_fig01732×166px
JAN1N6472US (MELF-G(D-5C)) — S C O T T S D A L E D I V I S I O N
S C O T T S D A L E D I V I S I O N
P2 · p02_fig022014×2031px
JAN1N6472US (MELF-G(D-5C)) — Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors
Voidless-Hermetically-Sealed Surface Mount Unidirectional Transient Suppressors
P2 · p02_fig031171×781px
JAN1N6472US (MELF-G(D-5C)) — GRAPHS
GRAPHS
P2 · p02_fig04670×432px
JAN1N6472US (MELF-G(D-5C)) — Microsemi Scottsdale Division Page 2 Copyright © 2007 10-03-2007 REV D
Microsemi Scottsdale Division Page 2 Copyright © 2007 10-03-2007 REV D
P2 · p02_fig04P2
JAN1N6472US (MELF-G(D-5C)) — Datasheet Page 2 (p02_fig04)
Datasheet Page 2 (p02_fig04)
P3 · p03_fig011947×1243px
JAN1N6472US (MELF-G(D-5C)) — FIGURE 3 T - Temperature - oC 8/20 µs CURRENT IMPULSE WAVEFORM FIGURE 4 DERATING CURVE PACKAGE DIMENSIONS Inches [mm]
FIGURE 3 T - Temperature - oC 8/20 µs CURRENT IMPULSE WAVEFORM FIGURE 4 DERATING CURVE PACKAGE DIMENSIONS Inches [mm]
P3 · p03_fig02732×166px
JAN1N6472US (MELF-G(D-5C)) — S C O T T S D A L E D I V I S I O N
S C O T T S D A L E D I V I S I O N
P3 · p03_fig03780×744px
JAN1N6472US (MELF-G(D-5C)) — FIGURE 3 T - Temperature - oC 8/20 µs CURRENT IMPULSE WAVEFORM FIGURE 4 DERATING CURVE PACKAGE DIMENSIONS Inches [mm]
FIGURE 3 T - Temperature - oC 8/20 µs CURRENT IMPULSE WAVEFORM FIGURE 4 DERATING CURVE PACKAGE DIMENSIONS Inches [mm]
Page 1 / 2 (16 extracted figures)

Technical Specifications & Part Details (JAN1N6472US)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:JAN1N6472US (MELF-G(D-5C)) is a 2-pin standard electronic & interconnect component featuring a 5.80 × 4.90 × 2.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.80 × 4.90 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (MELF-G(D-5C))
Pin Count & Lead PitchN / e
2 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol2 auto-grouped pins
OK
IPC-7351B Land Pattern2 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MELF-G(D-5C))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.80 × 4.90 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.50mm
Pad Size (W × L)Level B
1.80 × 5.30 mm
Pins / Total PadsTopology
2P / 2Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MELF-G(D-5C)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — JAN1N6472US (MELF-G(D-5C))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of JAN1N6472US (MELF-G(D-5C))?

Manufactured by MICROCHIP, the JAN1N6472US is housed in a MELF-G(D-5C) package with 2 pins and a 0.50 mm lead pitch. Key pins include: 1 (C: Multiplexed I/O & Peripheral Pin C (General)), 2 (A: Multiplexed I/O & Peripheral Pin A (General)).

What are the IPC-7351B PCB Footprint dimensions for JAN1N6472US?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), JAN1N6472US (MELF-G(D-5C)) has a nominal body envelope of 4.90 × 5.80 mm, pitch e = 0.50 mm, and 2 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for JAN1N6472US?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for JAN1N6472US (MICROCHIP, MELF-G(D-5C)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (2 pins) & JAN1N6472US Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CDigital_IOSignal terminal C (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: C. Supported peripheral buses: General.
2ADigital_IOSignal terminal A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A. Supported peripheral buses: General.