HV825MG-G (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

HV825MG-G

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · HV825MG-G (MSOP-8)1VDD2RSW-Osc3CS4LX8REL-Osc7VA6VB5GNDGrid Pitch = 2.54mm (IEEE-315)-15.2-10.2-5.105.110.215.210.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 1.0V to 1.6V)
2RSW-OscI/OMultiplexed I/O & Peripheral Pin RSW-Osc (RTC/CLK)
3CSI/OMultiplexed I/O & Peripheral Pin CS (General)
4LXI/OMultiplexed I/O & Peripheral Pin LX (General)
5GNDGNDGround Reference Pin (GND)
6VBI/OMultiplexed I/O & Peripheral Pin VB (General)
7VAI/OMultiplexed I/O & Peripheral Pin VA (General)
8REL-OscI/OMultiplexed I/O & Peripheral Pin REL-Osc (RTC/CLK)
PIN 1 VDD
Power
Power Supply Input (VDD — 1.0V to 1.6V)
Design note: Primary positive power supply input (VDD) operating in the 1.0V to 1.6V domain (Max rating: 1.6V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
HV825MG-G (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
HV825MG-G (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
HV825MG-G (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
HV825MG-G (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
HV825MG-G (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
HV825MG-G (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for HV825
P1 · p01_fig01377×200px
HV825MG-G (MSOP-8) — High-Voltage EL Lamp Driver IC
High-Voltage EL Lamp Driver IC
P1 · p01_fig021778×894px
HV825MG-G (MSOP-8) —  2015 Microchip Technology Inc. DS20005450A-page 1 | H-bridge, and are switching in opposite states to achieve a peak-to-peak voltage of two times the VCS voltage across the EL lamp. | Typical Application Circuit | VDD = VIN = 1.5V | 0.01
 2015 Microchip Technology Inc. DS20005450A-page 1 | H-bridge, and are switching in opposite states to achieve a peak-to-peak voltage of two times the VCS voltage across the EL lamp. | Typical Application Circuit | VDD = VIN = 1.5V | 0.01
P1 · p01_fig02P1
HV825MG-G (MSOP-8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P5 · p05_fig021360×644px
HV825MG-G (MSOP-8) — 3 e | 3 e
3 e | 3 e
P5 · p05_fig02P5
HV825MG-G (MSOP-8) — Datasheet Page 5 (p05_fig02)
Datasheet Page 5 (p05_fig02)
P2 · p02_fig01All Packages in PDF
HV825MG-G (MSOP-8) — HV825 | DS20005450A-page 2  2015 Microchip Technology Inc. | Package Types | Block Diagram | Test Circuit | VDD | RSW-Osc | CS | LX | REL-Osc | VA | VB | GND | 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | 8-Lead SOIC / 8-Lead MSOP | GND | VDD | REL-Osc
HV825 | DS20005450A-page 2  2015 Microchip Technology Inc. | Package Types | Block Diagram | Test Circuit | VDD | RSW-Osc | CS | LX | REL-Osc | VA | VB | GND | 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | 8-Lead SOIC / 8-Lead MSOP | GND | VDD | REL-Osc
P5 · p05_fig01All Packages in PDF
HV825MG-G (MSOP-8) — 8-Lead MSOP* | XXXXX YWWNNN | Example: Example: | HV825 5011L7 | 8-Lead SOIC* | XXXXXXX | NNN | 1343 | HV825LG | 1L7 3 e ^^YYWW
8-Lead MSOP* | XXXXX YWWNNN | Example: Example: | HV825 5011L7 | 8-Lead SOIC* | XXXXXXX | NNN | 1343 | HV825LG | 1L7 3 e ^^YYWW

Technical Specifications & Part Details (HV825MG-G)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:HV825MG-G (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.0V to 1.6V supply operation across -25°C to +85°C with integrated RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.0V to 1.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-25°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — HV825MG-G (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of HV825MG-G (MSOP-8)?

Manufactured by MICROCHIP, the HV825MG-G is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.0V to 1.6V. Key pins include: 1 (VDD: Power Supply Input (VDD — 1.0V to 1.6V)), 2 (RSW-Osc: Multiplexed I/O & Peripheral Pin RSW-Osc (RTC/CLK)), 3 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 4 (LX: Multiplexed I/O & Peripheral Pin LX (General)), 5 (GND: Ground Reference Pin (GND)), 6 (VB: Multiplexed I/O & Peripheral Pin VB (General)).

What are the IPC-7351B PCB Footprint dimensions for HV825MG-G?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), HV825MG-G (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for HV825MG-G?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for HV825MG-G (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & HV825 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 1.0V to 1.6V domain (Max rating: 1.6V).
2RSW-OscDigital_IOSignal terminal RSW-Osc (I/O, 1.0V to 1.6V domain). Multiplexed alternate functions: RSW-Osc. Supported peripheral buses: RTC/CLK.
3CSDigital_IOSignal terminal CS (I/O, 1.0V to 1.6V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
4LXDigital_IOSignal terminal LX (I/O, 1.0V to 1.6V domain). Multiplexed alternate functions: LX. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6VBDigital_IOSignal terminal VB (I/O, 1.0V to 1.6V domain). Multiplexed alternate functions: VB. Supported peripheral buses: General.
7VADigital_IOSignal terminal VA (I/O, 1.0V to 1.6V domain). Multiplexed alternate functions: VA. Supported peripheral buses: General.
8REL-OscDigital_IOSignal terminal REL-Osc (I/O, 1.0V to 1.6V domain). Multiplexed alternate functions: REL-Osc. Supported peripheral buses: RTC/CLK.