HT0440K6-G (TDFN-10-EP(3x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

HT0440K6-G

MICROCHIPTDFN-10-EP(3x4) · 11 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · HT0440K6-G (TDFN-10-EP(3x4))1A2CLK3NC4-VOUTA5+VOUTA6+VOUTB11EP10B9GND8NC7-VOUTBGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1102938475611E=3.00mm · Pitch e=0.50mmD=4.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1AI/OMultiplexed I/O & Peripheral Pin A (General)
2CLKI/OMultiplexed I/O & Peripheral Pin CLK (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4-VOUTAI/OMultiplexed I/O & Peripheral Pin -VOUTA (General)
5+VOUTAI/OMultiplexed I/O & Peripheral Pin +VOUTA (General)
6+VOUTBI/OMultiplexed I/O & Peripheral Pin +VOUTB (General)
7-VOUTBI/OMultiplexed I/O & Peripheral Pin -VOUTB (General)
8NCI/OMultiplexed I/O & Peripheral Pin NC (General)
9GNDGNDGround Reference Pin (GND)
10BI/OMultiplexed I/O & Peripheral Pin B (General)
11EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 A
I/O
Multiplexed I/O & Peripheral Pin A (General)
Design note: Signal terminal A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
HT0440K6-G (TDFN-10-EP(3x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
HT0440K6-G (TDFN-10-EP(3x4)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
HT0440K6-G (TDFN-10-EP(3x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
HT0440K6-G (TDFN-10-EP(3x4)) - 4. Package Dimensions (D×E×A)
TDFN-10-EP(3x4) · 3.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
HT0440K6-G (TDFN-10-EP(3x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
HT0440K6-G (TDFN-10-EP(3x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for HT0440
P2 · p02_fig01P2
HT0440K6-G (TDFN-10-EP(3x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P2 · p02_fig02P2
HT0440K6-G (TDFN-10-EP(3x4)) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P3 · p03_fig012036×926px
HT0440K6-G (TDFN-10-EP(3x4)) — Sym Parameter Min Typ Max Units Conditions
Sym Parameter Min Typ Max Units Conditions
P4 · p04_fig011577×705px
HT0440K6-G (TDFN-10-EP(3x4)) — Test Circuit
Test Circuit
P5 · p05_fig011844×1508px
HT0440K6-G (TDFN-10-EP(3x4)) — 10-Lead DFN Package Outline (K6) 3.00x4.00mm body, 1.00mm height (max), 0.50mm pitch | Seating Plane | θ | Top View | Side View | Bottom View | A | A1 | D | E | D2 | e b | E2 | L | L1 | View B | Note 3 | Note 2 | Note 1 (Index Area D/2 x E/
10-Lead DFN Package Outline (K6) 3.00x4.00mm body, 1.00mm height (max), 0.50mm pitch | Seating Plane | θ | Top View | Side View | Bottom View | A | A1 | D | E | D2 | e b | E2 | L | L1 | View B | Note 3 | Note 2 | Note 1 (Index Area D/2 x E/
P5 · p05_fig01P5
HT0440K6-G (TDFN-10-EP(3x4)) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)
P2 · p02_fig01All Packages in PDF
HT0440K6-G (TDFN-10-EP(3x4)) — Package may or may not include the following marks: Si or
Package may or may not include the following marks: Si or
P2 · p02_fig02All Packages in PDF
HT0440K6-G (TDFN-10-EP(3x4)) — CLK External clock frequency 0.5 - 2.0 MHz ---
CLK External clock frequency 0.5 - 2.0 MHz ---
P6 · p06_fig01All Packages in PDF
HT0440K6-G (TDFN-10-EP(3x4)) — 8-Lead SOIC (Narrow Body) Package Outline (LG) 4.90x3.90mm body, 1.75mm height (max), 1.27mm pitch | 1 | 8 | Seating Plane | Gauge Plane | L | L1 | L2 E E1 | D | e b | A A2 | A1 | Seating Plane | A | A | Top View | Side View | View B View B
8-Lead SOIC (Narrow Body) Package Outline (LG) 4.90x3.90mm body, 1.75mm height (max), 1.27mm pitch | 1 | 8 | Seating Plane | Gauge Plane | L | L1 | L2 E E1 | D | e b | A A2 | A1 | Seating Plane | A | A | Top View | Side View | View B View B

Technical Specifications & Part Details (HT0440K6-G)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:HT0440K6-G (TDFN-10-EP(3x4)) is a 10-pin standard electronic & interconnect component featuring a 4.00 × 3.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -55°C to +150°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-55°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2.0 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 3.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (TDFN-10-EP(3x4))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.30×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TDFN-10-EP(3x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.60 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-10-EP(3x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — HT0440K6-G (TDFN-10-EP(3x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of HT0440K6-G (TDFN-10-EP(3x4))?

Manufactured by MICROCHIP, the HT0440K6-G is housed in a TDFN-10-EP(3x4) package with 11 pins and a 0.50 mm lead pitch. Key pins include: 1 (A: Multiplexed I/O & Peripheral Pin A (General)), 2 (CLK: Multiplexed I/O & Peripheral Pin CLK (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (-VOUTA: Multiplexed I/O & Peripheral Pin -VOUTA (General)), 5 (+VOUTA: Multiplexed I/O & Peripheral Pin +VOUTA (General)), 6 (+VOUTB: Multiplexed I/O & Peripheral Pin +VOUTB (General)).

What are the IPC-7351B PCB Footprint dimensions for HT0440K6-G?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), HT0440K6-G (TDFN-10-EP(3x4)) has a nominal body envelope of 3.00 × 4.00 mm, pitch e = 0.50 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 2.30 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for HT0440K6-G?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for HT0440K6-G (MICROCHIP, TDFN-10-EP(3x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & HT0440 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ADigital_IOSignal terminal A (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: A. Supported peripheral buses: General.
2CLKDigital_IOSignal terminal CLK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CLK. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4-VOUTADigital_IOSignal terminal -VOUTA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: -VOUTA. Supported peripheral buses: General.
5+VOUTADigital_IOSignal terminal +VOUTA (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: +VOUTA. Supported peripheral buses: General.
6+VOUTBDigital_IOSignal terminal +VOUTB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: +VOUTB. Supported peripheral buses: General.
7-VOUTBDigital_IOSignal terminal -VOUTB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: -VOUTB. Supported peripheral buses: General.
8NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
10BDigital_IOSignal terminal B (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: B. Supported peripheral buses: General.
11EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.