dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — Symbol, Footprint IPC-7351B & 3D STEP Model

dsPIC33FJ16GS404-50I/ML

MICROCHIPQFN-44-EP(8x8) · 45 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8))1PGEC1/SDA/RP2RP20/CN20/RC3RP21/CN21/RC4RP22/CN22/RC5RP19/CN19/RC6VSS7VCAP8IO09IO410PWM2H/RP13/C11PWM2L/RP14/C12PWM1H/RA413PWM1L/RA314RP16/CN16/RC15RP29/CN29/RC16AVSS17AVDD18MCLR#19RP27/CN27/RC20RP28/CN28/RC21AN0/RA022AN1/RA123AN2/RA245EP44IO4443TDO/RP5/CN5/42PGEC3/RP15/C41PGED3/RP8/CN40VDD39VSS38RP24/CN24/RC37RP23/CN23/RC36RP18/CN18/RC35PGEC2/RP4/CN34PGED2/INT0/R33IO3332IO3231RP17/CN17/RC30VSS29VDD28RP26/CN26/RC27RP25/CN25/RC26AN5/RP10/CN125AN4/RP9/CN9/24AN3/RP0/CN0/Grid Pitch = 2.54mm (IEEE-315)-20.3-15.2-10.2-5.105.110.215.220.335.630.525.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4-30.5-35.6mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233343536373839404142434445E=8.00mm · Pitch e=0.65mmD=8.00mm-6-5-4-3-2-101234566543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 8.00mm × 8.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (45/45)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1PGEC1/SDA/RP7/CN7/RB7I/OMultiplexed I/O & Peripheral Pin PGEC1/SDA/RP7/CN7/RB7 (I2C)
2RP20/CN20/RC4I/OMultiplexed I/O & Peripheral Pin RP20/CN20/RC4 (General)
3RP21/CN21/RC5I/OMultiplexed I/O & Peripheral Pin RP21/CN21/RC5 (General)
4RP22/CN22/RC6I/OMultiplexed I/O & Peripheral Pin RP22/CN22/RC6 (General)
5RP19/CN19/RC3I/OMultiplexed I/O & Peripheral Pin RP19/CN19/RC3 (General)
6VSSGNDGround Reference Pin (VSS)
7VCAPI/OMultiplexed I/O & Peripheral Pin VCAP (General)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10PWM2H/RP13/CN13/RB13I/OMultiplexed I/O & Peripheral Pin PWM2H/RP13/CN13/RB13 (PWM)
11PWM2L/RP14/CN14/RB14I/OMultiplexed I/O & Peripheral Pin PWM2L/RP14/CN14/RB14 (PWM)
12PWM1H/RA4I/OMultiplexed I/O & Peripheral Pin PWM1H/RA4 (PWM)
13PWM1L/RA3I/OMultiplexed I/O & Peripheral Pin PWM1L/RA3 (PWM)
14RP16/CN16/RC0I/OMultiplexed I/O & Peripheral Pin RP16/CN16/RC0 (General)
15RP29/CN29/RC13I/OMultiplexed I/O & Peripheral Pin RP29/CN29/RC13 (General)
16AVSSGNDGround Reference Pin (AVSS)
17AVDDPowerPower Supply Input (AVDD — 3.0V to 3.6V)
18MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
19RP27/CN27/RC11I/OMultiplexed I/O & Peripheral Pin RP27/CN27/RC11 (General)
20RP28/CN28/RC12I/OMultiplexed I/O & Peripheral Pin RP28/CN28/RC12 (General)
21AN0/RA0I/OMultiplexed I/O & Peripheral Pin AN0/RA0 (General)
22AN1/RA1I/OMultiplexed I/O & Peripheral Pin AN1/RA1 (General)
23AN2/RA2I/OMultiplexed I/O & Peripheral Pin AN2/RA2 (General)
24AN3/RP0/CN0/RB0I/OMultiplexed I/O & Peripheral Pin AN3/RP0/CN0/RB0 (General)
25AN4/RP9/CN9/RB9I/OMultiplexed I/O & Peripheral Pin AN4/RP9/CN9/RB9 (General)
26AN5/RP10/CN10/RB10I/OMultiplexed I/O & Peripheral Pin AN5/RP10/CN10/RB10 (General)
27RP25/CN25/RC9I/OMultiplexed I/O & Peripheral Pin RP25/CN25/RC9 (General)
28RP26/CN26/RC10I/OMultiplexed I/O & Peripheral Pin RP26/CN26/RC10 (General)
29VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
30VSSGNDGround Reference Pin (VSS)
31RP17/CN17/RC1I/OMultiplexed I/O & Peripheral Pin RP17/CN17/RC1 (General)
32IO32I/OGeneral Purpose Digital I/O Pin IO32
33IO33I/OGeneral Purpose Digital I/O Pin IO33
34PGED2/INT0/RP3/CN3/RB3I/OMultiplexed I/O & Peripheral Pin PGED2/INT0/RP3/CN3/RB3 (General)
35PGEC2/RP4/CN4/RB4I/OMultiplexed I/O & Peripheral Pin PGEC2/RP4/CN4/RB4 (General)
36RP18/CN18/RC2I/OMultiplexed I/O & Peripheral Pin RP18/CN18/RC2 (General)
37RP23/CN23/RC7I/OMultiplexed I/O & Peripheral Pin RP23/CN23/RC7 (General)
38RP24/CN24/RC8I/OMultiplexed I/O & Peripheral Pin RP24/CN24/RC8 (General)
39VSSGNDExposed Thermal & Ground Pad (VSS)
40VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
41PGED3/RP8/CN8/RB8I/OMultiplexed I/O & Peripheral Pin PGED3/RP8/CN8/RB8 (General)
42PGEC3/RP15/CN15/RB15I/OMultiplexed I/O & Peripheral Pin PGEC3/RP15/CN15/RB15 (General)
43TDO/RP5/CN5/RB5I/OMultiplexed I/O & Peripheral Pin TDO/RP5/CN5/RB5 (General)
44IO44I/OGeneral Purpose Digital I/O Pin IO44
45EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 PGEC1/SDA/RP7/CN7/RB7
I/O
Multiplexed I/O & Peripheral Pin PGEC1/SDA/RP7/CN7/RB7 (I2C)
Design note: Signal terminal PGEC1/SDA/RP7/CN7/RB7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGEC1/SDA/RP7/CN7/RB7. Supported peripheral buses: I2C.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) - 2. Standard Pinout (Top View)
True package pinout (45 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) - 4. Package Dimensions (D×E×A)
QFN-44-EP(8x8) · 8.00×8.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) - 5. Recommended Land Pattern
IPC-7351B Footprint (45 Pads)Expand ›
6. Application SchematicSCHEMATIC
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for DSPIC33FJ16G
P1 · p01_fig01377×200px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — 16-Bit Digital Signal Controllers (up to 16-Kbyte Flash and up to 2-Kbyte SRAM) with High-Speed PWM, ADC and Comparators
16-Bit Digital Signal Controllers (up to 16-Kbyte Flash and up to 2-Kbyte SRAM) with High-Speed PWM, ADC and Comparators
P18 · p18_fig011687×2248px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — FIGURE 1-1: dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 BLOCK DIAGRAM PSV & Table Data Access Control Block
FIGURE 1-1: dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 BLOCK DIAGRAM PSV & Table Data Access Control Block
P83 · p83_fig011778×960px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — Flash memory can be programmed in two ways:
Flash memory can be programmed in two ways:
P83 · p83_fig021777×967px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
P84 · p84_fig01867×541px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — TRW 11064 Cycles 7.37 MHz 1 0.05 -   1 0.00375 -     --------------------------------------------------------------------------------------------- 1.586ms = =
TRW 11064 Cycles 7.37 MHz 1 0.05 -   1 0.00375 -     --------------------------------------------------------------------------------------------- 1.586ms = =
P84 · p84_fig02867×429px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — All of the Table Write operations are single-word writes (two instruction cycles) because only the buffers are written. A programming cycle is required for programming each row.
All of the Table Write operations are single-word writes (two instruction cycles) because only the buffers are written. A programming cycle is required for programming each row.
P270 · p270_fig01867×881px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — FIGURE 21-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1,2,3)
FIGURE 21-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1,2,3)
P270 · p270_fig01P270
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — Datasheet Page 270 (p270_fig01)
Datasheet Page 270 (p270_fig01)
P351 · p351_fig011777×2585px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
P371 · p371_fig011776×2225px
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
P371 · p371_fig01P371
dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) — Datasheet Page 371 (p371_fig01)
Datasheet Page 371 (p371_fig01)

Technical Specifications & Part Details (dsPIC33FJ16GS404-50I/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) is a 44-pin standard electronic & interconnect component featuring a 8.00 × 8.00 × 0.90 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 3.0V to 3.6V supply operation across -40°C to +85°C with integrated UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
8.00 × 8.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-44-EP(8x8))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol45 auto-grouped pins
OK
IPC-7351B Land Pattern45 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 6.50×6.45mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — DSPIC33FJ16G (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-44-EP(8x8))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
8.00 × 8.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.65mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
45P / 45Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-44-EP(8x8)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8))?

Manufactured by MICROCHIP, the dsPIC33FJ16GS404-50I/ML is housed in a QFN-44-EP(8x8) package with 45 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (PGEC1/SDA/RP7/CN7/RB7: Multiplexed I/O & Peripheral Pin PGEC1/SDA/RP7/CN7/RB7 (I2C)), 2 (RP20/CN20/RC4: Multiplexed I/O & Peripheral Pin RP20/CN20/RC4 (General)), 3 (RP21/CN21/RC5: Multiplexed I/O & Peripheral Pin RP21/CN21/RC5 (General)), 4 (RP22/CN22/RC6: Multiplexed I/O & Peripheral Pin RP22/CN22/RC6 (General)), 5 (RP19/CN19/RC3: Multiplexed I/O & Peripheral Pin RP19/CN19/RC3 (General)), 6 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for dsPIC33FJ16GS404-50I/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), dsPIC33FJ16GS404-50I/ML (QFN-44-EP(8x8)) has a nominal body envelope of 8.00 × 8.00 mm, pitch e = 0.65 mm, and 45 copper pads plus a central exposed thermal pad (EPAD) of 6.50 × 6.45 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for dsPIC33FJ16GS404-50I/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for dsPIC33FJ16GS404-50I/ML (MICROCHIP, QFN-44-EP(8x8)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (45 pins) & DSPIC33FJ16G Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1PGEC1/SDA/RP7/CN7/RB7Digital_IOSignal terminal PGEC1/SDA/RP7/CN7/RB7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGEC1/SDA/RP7/CN7/RB7. Supported peripheral buses: I2C.
2RP20/CN20/RC4Digital_IOSignal terminal RP20/CN20/RC4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP20/CN20/RC4. Supported peripheral buses: General.
3RP21/CN21/RC5Digital_IOSignal terminal RP21/CN21/RC5 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP21/CN21/RC5. Supported peripheral buses: General.
4RP22/CN22/RC6Digital_IOSignal terminal RP22/CN22/RC6 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP22/CN22/RC6. Supported peripheral buses: General.
5RP19/CN19/RC3Digital_IOSignal terminal RP19/CN19/RC3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP19/CN19/RC3. Supported peripheral buses: General.
6VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
7VCAPDigital_IOSignal terminal VCAP (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10PWM2H/RP13/CN13/RB13Digital_IOSignal terminal PWM2H/RP13/CN13/RB13 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM2H/RP13/CN13/RB13. Supported peripheral buses: PWM.
11PWM2L/RP14/CN14/RB14Digital_IOSignal terminal PWM2L/RP14/CN14/RB14 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM2L/RP14/CN14/RB14. Supported peripheral buses: PWM.
12PWM1H/RA4Digital_IOSignal terminal PWM1H/RA4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM1H/RA4. Supported peripheral buses: PWM.
13PWM1L/RA3Digital_IOSignal terminal PWM1L/RA3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM1L/RA3. Supported peripheral buses: PWM.
14RP16/CN16/RC0Digital_IOSignal terminal RP16/CN16/RC0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP16/CN16/RC0. Supported peripheral buses: General.
15RP29/CN29/RC13Digital_IOSignal terminal RP29/CN29/RC13 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP29/CN29/RC13. Supported peripheral buses: General.
16AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
17AVDDPower_InPrimary positive power supply input (AVDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
18MCLR#Digital_IOSignal terminal MCLR# (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
19RP27/CN27/RC11Digital_IOSignal terminal RP27/CN27/RC11 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP27/CN27/RC11. Supported peripheral buses: General.
20RP28/CN28/RC12Digital_IOSignal terminal RP28/CN28/RC12 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP28/CN28/RC12. Supported peripheral buses: General.
21AN0/RA0Digital_IOSignal terminal AN0/RA0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN0/RA0. Supported peripheral buses: General.
22AN1/RA1Digital_IOSignal terminal AN1/RA1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN1/RA1. Supported peripheral buses: General.
23AN2/RA2Digital_IOSignal terminal AN2/RA2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN2/RA2. Supported peripheral buses: General.
24AN3/RP0/CN0/RB0Digital_IOSignal terminal AN3/RP0/CN0/RB0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN3/RP0/CN0/RB0. Supported peripheral buses: General.
25AN4/RP9/CN9/RB9Digital_IOSignal terminal AN4/RP9/CN9/RB9 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN4/RP9/CN9/RB9. Supported peripheral buses: General.
26AN5/RP10/CN10/RB10Digital_IOSignal terminal AN5/RP10/CN10/RB10 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN5/RP10/CN10/RB10. Supported peripheral buses: General.
27RP25/CN25/RC9Digital_IOSignal terminal RP25/CN25/RC9 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP25/CN25/RC9. Supported peripheral buses: General.
28RP26/CN26/RC10Digital_IOSignal terminal RP26/CN26/RC10 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP26/CN26/RC10. Supported peripheral buses: General.
29VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
30VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
31RP17/CN17/RC1Digital_IOSignal terminal RP17/CN17/RC1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP17/CN17/RC1. Supported peripheral buses: General.
32IO32Digital_IOGeneral Purpose Digital I/O Pin IO32
33IO33Digital_IOGeneral Purpose Digital I/O Pin IO33
34PGED2/INT0/RP3/CN3/RB3Digital_IOSignal terminal PGED2/INT0/RP3/CN3/RB3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGED2/INT0/RP3/CN3/RB3. Supported peripheral buses: General.
35PGEC2/RP4/CN4/RB4Digital_IOSignal terminal PGEC2/RP4/CN4/RB4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGEC2/RP4/CN4/RB4. Supported peripheral buses: General.
36RP18/CN18/RC2Digital_IOSignal terminal RP18/CN18/RC2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP18/CN18/RC2. Supported peripheral buses: General.
37RP23/CN23/RC7Digital_IOSignal terminal RP23/CN23/RC7 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP23/CN23/RC7. Supported peripheral buses: General.
38RP24/CN24/RC8Digital_IOSignal terminal RP24/CN24/RC8 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP24/CN24/RC8. Supported peripheral buses: General.
39VSSGNDBottom exposed die attach pad (VSS) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.
40VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
41PGED3/RP8/CN8/RB8Digital_IOSignal terminal PGED3/RP8/CN8/RB8 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGED3/RP8/CN8/RB8. Supported peripheral buses: General.
42PGEC3/RP15/CN15/RB15Digital_IOSignal terminal PGEC3/RP15/CN15/RB15 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGEC3/RP15/CN15/RB15. Supported peripheral buses: General.
43TDO/RP5/CN5/RB5Digital_IOSignal terminal TDO/RP5/CN5/RB5 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDO/RP5/CN5/RB5. Supported peripheral buses: General.
44IO44Digital_IOGeneral Purpose Digital I/O Pin IO44
45EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.