dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

dsPIC33CK32MP202T-I/2N

MICROCHIPUQFN-28-EP(6x6) · 29 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6))1Internal2IO23PGC2/OA2IN+/4VSS5VDD6IO37NC8IO09IO410IO511RP52/PWM5H/A12RP53/PWM5L/A13VSS14VDD15TMS/RP42/PWM29EP28AN1/CMP1B/RA27AN0/CMP1A/RA26MCLR#25AVDD24AVSS23PWM1L/RA322PWM1H/RA421IO1020IO919TCK/RP12(1)/18RP45/PWM2L/R17TDI/RP44/PWM16TCK/RP43/PWMGrid Pitch = 2.54mm (IEEE-315)-20.3-15.2-10.2-5.105.110.215.220.325.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=6.00mm · Pitch e=0.50mmD=6.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 6.00mm × 6.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1InternalI/OMultiplexed I/O & Peripheral Pin Internal (General)
2IO2I/OGeneral Purpose Digital I/O Pin IO2
3PGC2/OA2IN+/RP36/RB4I/OMultiplexed I/O & Peripheral Pin PGC2/OA2IN+/RP36/RB4 (General)
4VSSGNDGround Reference Pin (VSS)
5VDDPowerRegulated Power Output (VDD — 3.0V to 3.6V)
6IO3I/OGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7NCNCNo Connect (Leave Floating)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11RP52/PWM5H/ASDA2/RC4I/OMultiplexed I/O & Peripheral Pin RP52/PWM5H/ASDA2/RC4 (PWM)
12RP53/PWM5L/ASCL2/RC5I/OMultiplexed I/O & Peripheral Pin RP53/PWM5L/ASCL2/RC5 (PWM)
13VSSGNDGround Reference Pin (VSS)
14VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
15TMS/RP42/PWM3H/RB10I/OMultiplexed I/O & Peripheral Pin TMS/RP42/PWM3H/RB10 (PWM)
16TCK/RP43/PWM3L/RB11I/OMultiplexed I/O & Peripheral Pin TCK/RP43/PWM3L/RB11 (PWM)
17TDI/RP44/PWM2H/RB12I/OMultiplexed I/O & Peripheral Pin TDI/RP44/PWM2H/RB12 (PWM, RTC/CLK)
18RP45/PWM2L/RB13I/OMultiplexed I/O & Peripheral Pin RP45/PWM2L/RB13 (PWM, RTC/CLK)
19TCK/RP12(1)/CN12/RB12I/OMultiplexed I/O & Peripheral Pin TCK/RP12(1)/CN12/RB12 (General)
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21IO10I/OGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22PWM1H/RA4I/OMultiplexed I/O & Peripheral Pin PWM1H/RA4 (PWM)
23PWM1L/RA3I/OMultiplexed I/O & Peripheral Pin PWM1L/RA3 (PWM)
24AVSSGNDGround Reference Pin (AVSS)
25AVDDPowerPower Supply Input (AVDD — 3.0V to 3.6V)
26MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
27AN0/CMP1A/RA0I/OMultiplexed I/O & Peripheral Pin AN0/CMP1A/RA0 (General)
28AN1/CMP1B/RA1I/OMultiplexed I/O & Peripheral Pin AN1/CMP1B/RA1 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 Internal
I/O
Multiplexed I/O & Peripheral Pin Internal (General)
Design note: Comparator 1
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) - 4. Package Dimensions (D×E×A)
UQFN-28-EP(6x6) · 6.00×6.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for DSPIC33CK64M / DSPIC33CK128 / DSPIC33CK32M
P1 · p01_fig01376×200px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — 28/36/48/64/80-Pin, 16-Bit Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD)
28/36/48/64/80-Pin, 16-Bit Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD)
P25 · p25_fig01867×1452px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — FIGURE 2-1: RECOMMENDED MINIMUM CONNECTION
FIGURE 2-1: RECOMMENDED MINIMUM CONNECTION
P25 · p25_fig01P25
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — Datasheet Page 25 (p25_fig01)
Datasheet Page 25 (p25_fig01)
P27 · p27_fig01867×1621px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — FIGURE 2-3: SUGGESTED PLACEMENT OF THE OSCILLATOR CIRCUIT
FIGURE 2-3: SUGGESTED PLACEMENT OF THE OSCILLATOR CIRCUIT
P28 · p28_fig011457×1006px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — FIGURE 2-4: INTERLEAVED PFC
FIGURE 2-4: INTERLEAVED PFC
P81 · p81_fig011295×729px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
P413 · p413_fig011170×1106px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — FIGURE 19-1: PMP MODULE PINOUT AND CONNECTIONS TO EXTERNAL DEVICES
FIGURE 19-1: PMP MODULE PINOUT AND CONNECTIONS TO EXTERNAL DEVICES
P413 · p413_fig01P413
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — Datasheet Page 413 (p413_fig01)
Datasheet Page 413 (p413_fig01)
P535 · p535_fig011780×736px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — REGISTER 30-20: VREGCON: VOLTAGE REGULATOR CONTROL REGISTER
REGISTER 30-20: VREGCON: VOLTAGE REGULATOR CONTROL REGISTER
P607 · p607_fig011778×2733px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) —  2017-2021 Microchip Technology Inc. DS70005349J-page 607 | dsPIC33CK256MP508 FAMILY | Microchip Technology Drawing C04-385 Rev C Sheet 2 of 2 | Number of Terminals | Overall Height | Terminal Width | Overall Width | Overall Length | Termi
 2017-2021 Microchip Technology Inc. DS70005349J-page 607 | dsPIC33CK256MP508 FAMILY | Microchip Technology Drawing C04-385 Rev C Sheet 2 of 2 | Number of Terminals | Overall Height | Terminal Width | Overall Width | Overall Length | Termi
P607 · p607_fig01P607
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — Datasheet Page 607 (p607_fig01)
Datasheet Page 607 (p607_fig01)
P608 · p608_fig011778×2733px
dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) — dsPIC33CK256MP508 FAMILY | DS70005349J-page 608  2017-2021 Microchip Technology Inc. | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Optional Center Pad Width | Contact Pad Spacing | Optional Center Pad Length | Contact Pitch |
dsPIC33CK256MP508 FAMILY | DS70005349J-page 608  2017-2021 Microchip Technology Inc. | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Optional Center Pad Width | Contact Pad Spacing | Optional Center Pad Length | Contact Pitch |
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (dsPIC33CK32MP202T-I/2N)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) is a 28-pin standard electronic & interconnect component featuring a 6.00 × 6.00 × 0.55 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3.0V to 3.6V supply operation across -40°C to +125°C with integrated UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
8 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.00 × 6.00 × 0.55 mm (A1=0.03 mm)
Package family: QFN (UQFN-28-EP(6x6))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 4.40×4.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UQFN-28-EP(6x6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.00 × 6.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.55mm · e=0.50mm
Pad Size (W × L)Level B
0.35 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UQFN-28-EP(6x6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6))?

Manufactured by MICROCHIP, the dsPIC33CK32MP202T-I/2N is housed in a UQFN-28-EP(6x6) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (Internal: Multiplexed I/O & Peripheral Pin Internal (General)), 2 (IO2: General Purpose Digital I/O Pin IO2), 3 (PGC2/OA2IN+/RP36/RB4: Multiplexed I/O & Peripheral Pin PGC2/OA2IN+/RP36/RB4 (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (VDD: Regulated Power Output (VDD — 3.0V to 3.6V)), 6 (IO3: GPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)).

What are the IPC-7351B PCB Footprint dimensions for dsPIC33CK32MP202T-I/2N?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), dsPIC33CK32MP202T-I/2N (UQFN-28-EP(6x6)) has a nominal body envelope of 6.00 × 6.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 4.40 × 4.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for dsPIC33CK32MP202T-I/2N?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for dsPIC33CK32MP202T-I/2N (MICROCHIP, UQFN-28-EP(6x6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & DSPIC33CK64M / DSPIC33CK128 / DSPIC33CK32M Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1InternalDigital_IOSignal terminal Internal (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: Internal. Supported peripheral buses: General.
2IO2Digital_IOGeneral Purpose Digital I/O Pin IO2
3PGC2/OA2IN+/RP36/RB4Digital_IOSignal terminal PGC2/OA2IN+/RP36/RB4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGC2/OA2IN+/RP36/RB4. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5VDDPower_OutRegulated power output rail (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
6IO3Digital_IOGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7NCNo_ConnectNo Connect (Leave Floating)
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11RP52/PWM5H/ASDA2/RC4Digital_IOSignal terminal RP52/PWM5H/ASDA2/RC4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP52/PWM5H/ASDA2/RC4. Supported peripheral buses: PWM.
12RP53/PWM5L/ASCL2/RC5Digital_IOSignal terminal RP53/PWM5L/ASCL2/RC5 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP53/PWM5L/ASCL2/RC5. Supported peripheral buses: PWM.
13VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
14VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
15TMS/RP42/PWM3H/RB10Digital_IOSignal terminal TMS/RP42/PWM3H/RB10 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TMS/RP42/PWM3H/RB10. Supported peripheral buses: PWM.
16TCK/RP43/PWM3L/RB11Digital_IOSignal terminal TCK/RP43/PWM3L/RB11 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TCK/RP43/PWM3L/RB11. Supported peripheral buses: PWM.
17TDI/RP44/PWM2H/RB12Digital_IOSignal terminal TDI/RP44/PWM2H/RB12 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDI/RP44/PWM2H/RB12. Supported peripheral buses: PWM, RTC/CLK.
18RP45/PWM2L/RB13Digital_IOSignal terminal RP45/PWM2L/RB13 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: RP45/PWM2L/RB13. Supported peripheral buses: PWM, RTC/CLK.
19TCK/RP12(1)/CN12/RB12Digital_IOSignal terminal TCK/RP12(1)/CN12/RB12 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TCK/RP12(1)/CN12/RB12. Supported peripheral buses: General.
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21IO10Digital_IOGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22PWM1H/RA4Digital_IOSignal terminal PWM1H/RA4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM1H/RA4. Supported peripheral buses: PWM.
23PWM1L/RA3Digital_IOSignal terminal PWM1L/RA3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM1L/RA3. Supported peripheral buses: PWM.
24AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
25AVDDPower_InPrimary positive power supply input (AVDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
26MCLR#Digital_IOSignal terminal MCLR# (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
27AN0/CMP1A/RA0Digital_IOSignal terminal AN0/CMP1A/RA0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN0/CMP1A/RA0. Supported peripheral buses: General.
28AN1/CMP1B/RA1Digital_IOSignal terminal AN1/CMP1B/RA1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN1/CMP1B/RA1. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.