MIC29151-12WU (TO-263-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC29151-12WU

MICROCHIPTO-263-5 · 6 Pins · Pitch 1.70mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC29151-12WU (TO-263-5)1ENABLE2INPUT3GND6GND5FLAG4OUTPUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
654321E=9.00mm · Pitch e=1.70mmD=10.10mm-14-12-10-8-6-4-2024681097531-1-3-5-7-9mm
3. 3D CAD MODEL
Package Body: 9.00mm × 10.10mm · Pitch: 1.70mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ENABLEI/OMultiplexed I/O & Peripheral Pin ENABLE (General)
2INPUTI/OMultiplexed I/O & Peripheral Pin INPUT (General)
3GNDGNDGround Reference Pin (GND)
4OUTPUTI/OMultiplexed I/O & Peripheral Pin OUTPUT (General)
5FLAGI/OMultiplexed I/O & Peripheral Pin FLAG (General)
6GNDGNDGround Reference Pin (GND)
PIN 1 ENABLE
I/O
Multiplexed I/O & Peripheral Pin ENABLE (General)
Design note: CMOS compatible control input. Logic-high = enable, logic-low = shutdown.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 22 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC29151-12WU (TO-263-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC29151-12WU (TO-263-5) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC29151-12WU (TO-263-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC29151-12WU (TO-263-5) - 4. Package Dimensions (D×E×A)
TO-263-5 · 9.00×10.10mm · Pitch 1.70mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC29151-12WU (TO-263-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC29151-12WU (TO-263-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (22 figures · Page 1/2)
Showing 1–12 of 22 uncropped original figures for MIC29500 / MIC29151
P2 · p02_fig02EXACT PACKAGE
MIC29151-12WU (TO-263-5) — MIC29302/502 5-Lead TO-263 (D2Pak) Adj. Voltage (U) (Top View)
MIC29302/502 5-Lead TO-263 (D2Pak) Adj. Voltage (U) (Top View)
P2 · p02_fig03EXACT PACKAGE
MIC29151-12WU (TO-263-5) — MIC29151/301/501 5-Lead TO-263 (D2Pak) Fixed Voltage (U) (Top View)
MIC29151/301/501 5-Lead TO-263 (D2Pak) Fixed Voltage (U) (Top View)
P2 · p02_fig04EXACT PACKAGE
MIC29151-12WU (TO-263-5) — MIC29152 5-Lead TO-252 (D-Pak) Adjustable Voltage (D) (Top View)
MIC29152 5-Lead TO-252 (D-Pak) Adjustable Voltage (D) (Top View)
P2 · p02_fig05EXACT PACKAGE
MIC29151-12WU (TO-263-5) — MIC29153/303/503 5-Lead TO-263 (D2Pak) Adj. with Flag (U) (Top View)
MIC29153/303/503 5-Lead TO-263 (D2Pak) Adj. with Flag (U) (Top View)
P2 · p02_fig07EXACT PACKAGE
MIC29151-12WU (TO-263-5) — DS20005685B-page 2  2016-2019 Microchip Technology Inc.
DS20005685B-page 2  2016-2019 Microchip Technology Inc.
P27 · p27_fig01EXACT PACKAGE
MIC29151-12WU (TO-263-5) — MIC2915X/30X/50X/75X | 5.0 PACKAGING INFORMATION | 5.1 Package Marking Information | 3- and 5-Pin TO-263 (Fixed)* Example | XXXXXXXX | WNNNP X.XXX | 5-Pin TO-263 (Adjustable)* Example | MIC29150 | 8943P 3.3WU | XXX XXXXXXX WNNNP | MIC 29152
MIC2915X/30X/50X/75X | 5.0 PACKAGING INFORMATION | 5.1 Package Marking Information | 3- and 5-Pin TO-263 (Fixed)* Example | XXXXXXXX | WNNNP X.XXX | 5-Pin TO-263 (Adjustable)* Example | MIC29150 | 8943P 3.3WU | XXX XXXXXXX WNNNP | MIC 29152
P31 · p31_fig01EXACT PACKAGE
MIC29151-12WU (TO-263-5) — 5-Lead TO-263 (DDPAK) Package Outline and Recommended Land Pattern
5-Lead TO-263 (DDPAK) Package Outline and Recommended Land Pattern
P1 · p01_fig01376×200px
MIC29151-12WU (TO-263-5) — High-Current Low Dropout Regulators
High-Current Low Dropout Regulators
P3 · p03_fig011777×1374px
MIC29151-12WU (TO-263-5) — Typical Application Circuits
Typical Application Circuits
P3 · p03_fig01P3
MIC29151-12WU (TO-263-5) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P24 · p24_fig011777×1544px
MIC29151-12WU (TO-263-5) — FIGURE 4-1: Linear Regulators Require Only Two Capacitors for Operation.
FIGURE 4-1: Linear Regulators Require Only Two Capacitors for Operation.
P24 · p24_fig01P24
MIC29151-12WU (TO-263-5) — Datasheet Page 24 (p24_fig01)
Datasheet Page 24 (p24_fig01)
Page 1 / 2 (22 extracted figures)

Technical Specifications & Part Details (MIC29151-12WU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC29151-12WU (TO-263-5) is a 5-pin standard electronic & interconnect component featuring a 10.10 × 9.00 × 4.50 mm mechanical envelope (lead pitch e = 1.70 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated USB interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.10 × 9.00 × 4.50 mm (A1=0.08 mm)
Package family: TO263 (TO-263-5)
Pin Count & Lead PitchN / e
5 Pins | Pitch e = 1.70 mm (66.9 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 1.70mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TO-263-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.10 × 9.00 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=1.70mm
Pad Size (W × L)Level B
1.02 × 3.80 mm
Pins / Total PadsTopology
6P / 6Pad (SOT_TAB)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-263-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC29151-12WU (TO-263-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC29151-12WU (TO-263-5)?

Manufactured by MICROCHIP, the MIC29151-12WU is housed in a TO-263-5 package with 6 pins and a 1.70 mm lead pitch. Key pins include: 1 (ENABLE: Multiplexed I/O & Peripheral Pin ENABLE (General)), 2 (INPUT: Multiplexed I/O & Peripheral Pin INPUT (General)), 3 (GND: Ground Reference Pin (GND)), 4 (OUTPUT: Multiplexed I/O & Peripheral Pin OUTPUT (General)), 5 (FLAG: Multiplexed I/O & Peripheral Pin FLAG (General)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MIC29151-12WU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC29151-12WU (TO-263-5) has a nominal body envelope of 9.00 × 10.10 mm, pitch e = 1.70 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC29151-12WU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC29151-12WU (MICROCHIP, TO-263-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & MIC29500 / MIC29151 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ENABLEDigital_IOSignal terminal ENABLE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ENABLE. Supported peripheral buses: General.
2INPUTDigital_IOSignal terminal INPUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: INPUT. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4OUTPUTDigital_IOSignal terminal OUTPUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OUTPUT. Supported peripheral buses: General.
5FLAGDigital_IOSignal terminal FLAG (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: FLAG. Supported peripheral buses: General.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.