MCP4361T-503E/ML (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP4361T-503E/ML

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP4361T-503E/ML (QFN-20-EP(4x4))1P3B2CS#3SCK4SDI5VSS6P1B7P1W8P1A9P0A10P0W11P0B21EP20P3W19P3A18P2A17P2W16P2B15VDD14SDO13RESET#12WP#Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1P3BI/OMultiplexed I/O & Peripheral Pin P3B (General)
2CS#I/OMultiplexed I/O & Peripheral Pin CS# (General)
3SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
4SDII/OMultiplexed I/O & Peripheral Pin SDI (General)
5VSSGNDGround Reference Pin (VSS)
6P1BI/OMultiplexed I/O & Peripheral Pin P1B (General)
7P1WI/OMultiplexed I/O & Peripheral Pin P1W (General)
8P1AI/OMultiplexed I/O & Peripheral Pin P1A (General)
9P0AI/OMultiplexed I/O & Peripheral Pin P0A (General)
10P0WI/OMultiplexed I/O & Peripheral Pin P0W (General)
11P0BI/OMultiplexed I/O & Peripheral Pin P0B (General)
12WP#I/OMultiplexed I/O & Peripheral Pin WP# (General)
13RESET#ISystem Enable & Hardware Reset (RESET#)
14SDOI/OMultiplexed I/O & Peripheral Pin SDO (General)
15VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
16P2BI/OMultiplexed I/O & Peripheral Pin P2B (General)
17P2WI/OMultiplexed I/O & Peripheral Pin P2W (General)
18P2AI/OMultiplexed I/O & Peripheral Pin P2A (General)
19P3AI/OMultiplexed I/O & Peripheral Pin P3A (General)
20P3WI/OMultiplexed I/O & Peripheral Pin P3W (General)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 P3B
I/O
Multiplexed I/O & Peripheral Pin P3B (General)
Design note: Signal terminal P3B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P3B. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP4361T-503E/ML (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP4361T-503E/ML (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP4361T-503E/ML (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP4361T-503E/ML (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP4361T-503E/ML (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP4361T-503E/ML (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for MCP4341 / MCP4361
P1 · p01_fig011777×869px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — VSS
VSS
P2 · p02_fig011573×2053px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — MCP4331 (3) 4 Potentiometer (1) SPI RAM No Mid-Scale 5.0, 10.0, 50.0, 100.0 75 129 1.8V to 5.5V
MCP4331 (3) 4 Potentiometer (1) SPI RAM No Mid-Scale 5.0, 10.0, 50.0, 100.0 75 129 1.8V to 5.5V
P2 · p02_fig021795×773px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — P3B
P3B
P62 · p62_fig011777×695px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — FIGURE 8-4: MCP4XXX Non-volatile Digital Potentiometer Evaluation Board (MCP402XEV) implementation to generate the VIHH voltage. 8.3 Using Shutdown Modes
FIGURE 8-4: MCP4XXX Non-volatile Digital Potentiometer Evaluation Board (MCP402XEV) implementation to generate the VIHH voltage. 8.3 Using Shutdown Modes
P62 · p62_fig021576×608px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — FIGURE 8-3: Using the TC1240A to Generate the VIHH Voltage.
FIGURE 8-3: Using the TC1240A to Generate the VIHH Voltage.
P62 · p62_fig03867×1140px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — FIGURE 8-3: Using the TC1240A to Generate the VIHH Voltage.
FIGURE 8-3: Using the TC1240A to Generate the VIHH Voltage.
P62 · p62_fig01P62
MCP4361T-503E/ML (QFN-20-EP(4x4)) — Datasheet Page 62 (p62_fig01)
Datasheet Page 62 (p62_fig01)
P64 · p64_fig011779×980px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — Figure 8-8 shows possible layout implementations for an application to support the quad and dual options on the same PCB.
Figure 8-8 shows possible layout implementations for an application to support the quad and dual options on the same PCB.
P67 · p67_fig02456×1439px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — Example | 4362502E | 0940 | 256 | Example | 4361 502EML | 256 ^^3 e | Example | 0940 | MCP4361 | EST 256 | 0940 ^^3 e
Example | 4362502E | 0940 | 256 | Example | 4361 502EML | 256 ^^3 e | Example | 0940 | MCP4361 | EST 256 | 0940 ^^3 e
P67 · p67_fig031777×754px
MCP4361T-503E/ML (QFN-20-EP(4x4)) — © 2009 Microchip Technology Inc. DS22233A-page 67 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2009 Microchip Technology Inc. DS22233A-page 67 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P67 · p67_fig03P67
MCP4361T-503E/ML (QFN-20-EP(4x4)) — Datasheet Page 67 (p67_fig03)
Datasheet Page 67 (p67_fig03)
P1 · p01_fig02All Packages in PDF
MCP4361T-503E/ML (QFN-20-EP(4x4)) — MCP434X/436X
MCP434X/436X
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (MCP4361T-503E/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP4361T-503E/ML (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.7V to 5.5V supply operation across 0°C to 70°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to 70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
10 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.70×2.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP4361T-503E/ML (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP4361T-503E/ML (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the MCP4361T-503E/ML is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (P3B: Multiplexed I/O & Peripheral Pin P3B (General)), 2 (CS#: Multiplexed I/O & Peripheral Pin CS# (General)), 3 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)), 4 (SDI: Multiplexed I/O & Peripheral Pin SDI (General)), 5 (VSS: Ground Reference Pin (VSS)), 6 (P1B: Multiplexed I/O & Peripheral Pin P1B (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP4361T-503E/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP4361T-503E/ML (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.70 × 2.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP4361T-503E/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP4361T-503E/ML (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & MCP4341 / MCP4361 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1P3BDigital_IOSignal terminal P3B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P3B. Supported peripheral buses: General.
2CS#Digital_IOSignal terminal CS# (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CS#. Supported peripheral buses: General.
3SCKDigital_IOSignal terminal SCK (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
4SDIDigital_IOSignal terminal SDI (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDI. Supported peripheral buses: General.
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6P1BDigital_IOSignal terminal P1B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P1B. Supported peripheral buses: General.
7P1WDigital_IOSignal terminal P1W (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P1W. Supported peripheral buses: General.
8P1ADigital_IOSignal terminal P1A (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P1A. Supported peripheral buses: General.
9P0ADigital_IOSignal terminal P0A (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P0A. Supported peripheral buses: General.
10P0WDigital_IOSignal terminal P0W (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P0W. Supported peripheral buses: General.
11P0BDigital_IOSignal terminal P0B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P0B. Supported peripheral buses: General.
12WP#Digital_IOSignal terminal WP# (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: WP#. Supported peripheral buses: General.
13RESET#Digital_IOActive-low hardware reset terminal (RESET#): pulling this pin Low resets the processor core and peripherals.
14SDODigital_IOSignal terminal SDO (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDO. Supported peripheral buses: General.
15VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
16P2BDigital_IOSignal terminal P2B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P2B. Supported peripheral buses: General.
17P2WDigital_IOSignal terminal P2W (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P2W. Supported peripheral buses: General.
18P2ADigital_IOSignal terminal P2A (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P2A. Supported peripheral buses: General.
19P3ADigital_IOSignal terminal P3A (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P3A. Supported peripheral buses: General.
20P3WDigital_IOSignal terminal P3W (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P3W. Supported peripheral buses: General.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.