MXPLAD7.5KP20CAE3 (PLAD) — Symbol, Footprint IPC-7351B & 3D STEP Model

MXPLAD7.5KP20CAE3

MICROCHIPPLAD · 2 Pins · Pitch 1.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MXPLAD7.5KP20CAE3 (PLAD)1122Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
21E=8.90mm · Pitch e=1.50mmD=8.90mm-11-9-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 8.90mm × 8.90mm · Pitch: 1.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (2/2)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
11I/OMultiplexed I/O & Peripheral Pin 1 (General)
22I/OMultiplexed I/O & Peripheral Pin 2 (General)
PIN 1 1
I/O
Multiplexed I/O & Peripheral Pin 1 (General)
Design note: Signal terminal 1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 1. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MXPLAD7.5KP20CAE3 (PLAD) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MXPLAD7.5KP20CAE3 (PLAD) - 2. Standard Pinout (Top View)
True package pinout (2 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MXPLAD7.5KP20CAE3 (PLAD) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MXPLAD7.5KP20CAE3 (PLAD) - 4. Package Dimensions (D×E×A)
PLAD · 8.90×8.90mm · Pitch 1.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MXPLAD7.5KP20CAE3 (PLAD) - 5. Recommended Land Pattern
IPC-7351B Footprint (2 Pads)Expand ›
6. Application SchematicSCHEMATIC
MXPLAD7.5KP20CAE3 (PLAD) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MPLAD7.5KP24 / MAPLAD7.5KP3 / MXPLAD7.5KP2
P1 · p01_fig01EXACT PACKAGE
MXPLAD7.5KP20CAE3 (PLAD) — RF01084, Rev B (24/6/15) ©2015 Microsemi Corporation Page 1 of 6
RF01084, Rev B (24/6/15) ©2015 Microsemi Corporation Page 1 of 6
P1 · p01_fig03EXACT PACKAGE
MXPLAD7.5KP20CAE3 (PLAD) — mini-PLAD (The cathode is the heatsink under the body of this device.)
mini-PLAD (The cathode is the heatsink under the body of this device.)
P2 · p02_fig01EXACT PACKAGE
MXPLAD7.5KP20CAE3 (PLAD) — MECHANICAL and PACKAGING
MECHANICAL and PACKAGING
P2 · p02_fig02EXACT PACKAGE
MXPLAD7.5KP20CAE3 (PLAD) — PART NOMENCLATURE M PLAD 7.5K P 10 CA (e3)
PART NOMENCLATURE M PLAD 7.5K P 10 CA (e3)
P2 · p02_fig03EXACT PACKAGE
MXPLAD7.5KP20CAE3 (PLAD) — PART NOMENCLATURE M PLAD 7.5K P 10 CA (e3) | Reliability Level* | M MA MX MXL *(see Hi-Rel Non-Hermetic | Product Portfolio) | Package Designation | PPP Rating (W) | RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Polarity A
PART NOMENCLATURE M PLAD 7.5K P 10 CA (e3) | Reliability Level* | M MA MX MXL *(see Hi-Rel Non-Hermetic | Product Portfolio) | Package Designation | PPP Rating (W) | RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Polarity A
P1 · p01_fig02406×216px
MXPLAD7.5KP20CAE3 (PLAD) — Tested in accordance with the requirements of AEC-Q101
Tested in accordance with the requirements of AEC-Q101
P2 · p02_fig01P2
MXPLAD7.5KP20CAE3 (PLAD) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P6 · p06_fig011301×1301px
MXPLAD7.5KP20CAE3 (PLAD) — PAD LAYOUT
PAD LAYOUT
P6 · p06_fig02657×521px
MXPLAD7.5KP20CAE3 (PLAD) — PAD LAYOUT
PAD LAYOUT

Technical Specifications & Part Details (MXPLAD7.5KP20CAE3)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MXPLAD7.5KP20CAE3 (PLAD) is a 2-pin standard electronic & interconnect component featuring a 8.90 × 8.90 × 2.00 mm mechanical envelope (lead pitch e = 1.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
8.90 × 8.90 × 2.00 mm (A1=0.10 mm)
Package family: OTHER (PLAD)
Pin Count & Lead PitchN / e
2 Pins | Pitch e = 1.50 mm (59.1 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol2 auto-grouped pins
OK
IPC-7351B Land Pattern2 pads · Pitch 1.50mm
OK
IPC-7525 60% Solder PasteEPAD 8.97×8.97mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PLAD)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
8.90 × 8.90 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=1.50mm
Pad Size (W × L)Level B
1.98 × 2.97 mm
Pins / Total PadsTopology
2P / 2Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PLAD
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MXPLAD7.5KP20CAE3 (PLAD)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MXPLAD7.5KP20CAE3 (PLAD)?

Manufactured by MICROCHIP, the MXPLAD7.5KP20CAE3 is housed in a PLAD package with 2 pins and a 1.50 mm lead pitch. Key pins include: 1 (1: Multiplexed I/O & Peripheral Pin 1 (General)), 2 (2: Multiplexed I/O & Peripheral Pin 2 (General)).

What are the IPC-7351B PCB Footprint dimensions for MXPLAD7.5KP20CAE3?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MXPLAD7.5KP20CAE3 (PLAD) has a nominal body envelope of 8.90 × 8.90 mm, pitch e = 1.50 mm, and 2 copper pads plus a central exposed thermal pad (EPAD) of 8.97 × 8.97 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MXPLAD7.5KP20CAE3?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MXPLAD7.5KP20CAE3 (MICROCHIP, PLAD) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (2 pins) & MPLAD7.5KP24 / MAPLAD7.5KP3 / MXPLAD7.5KP2 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
11Digital_IOSignal terminal 1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 1. Supported peripheral buses: General.
22Digital_IOSignal terminal 2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: 2. Supported peripheral buses: General.