ATTINY461-20MUR (VQFN-32(5x5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY461-20MUR

MICROCHIPVQFN-32(5x5) · 33 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY461-20MUR (VQFN-32(5x5))1OC1A • OC1OE2(OC1B/PCINT13NC4VCC5GND6NC7NC8IO09NC10IO511IO612NC13(ADC6/AIN1/P14(ADC5/AIN0/P15(ADC4/AIN2/P16NC17PA4(ADC3/ICP33EP32IO3231IO3130IO3029NC28NC27NC26IO2125PA1(ADC1/DO/24NC23IO1222PA3(AREF/PCI21AGND20NC19NC18AVCCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.827.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233E=5.00mm · Pitch e=0.50mmD=5.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.00mm × 5.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (33/33)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OC1A • OC1OE2I/OMultiplexed I/O & Peripheral Pin OC1A • OC1OE2 (PWM)
2(OC1B/PCINT11)PB3I/OMultiplexed I/O & Peripheral Pin (OC1B/PCINT11)PB3 (PWM)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4VCCPowerPower Supply Input (VCC — 1.8V to 5.5V)
5GNDGNDGround Reference Pin (GND)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7NCNCNo Connect (Leave Floating)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9NCI/OMultiplexed I/O & Peripheral Pin NC (General)
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12NCI/OMultiplexed I/O & Peripheral Pin NC (General)
13(ADC6/AIN1/PCINT7)PA7I/OMultiplexed I/O & Peripheral Pin (ADC6/AIN1/PCINT7)PA7 (ADC)
14(ADC5/AIN0/PCINT6)PA6I/OMultiplexed I/O & Peripheral Pin (ADC5/AIN0/PCINT6)PA6 (ADC)
15(ADC4/AIN2/PCINT5)PA5I/OMultiplexed I/O & Peripheral Pin (ADC4/AIN2/PCINT5)PA5 (ADC)
16NCI/OMultiplexed I/O & Peripheral Pin NC (General)
17PA4(ADC3/ICP0/PCINT4)I/OMultiplexed I/O & Peripheral Pin PA4(ADC3/ICP0/PCINT4) (ADC)
18AVCCPowerPower Supply Input (AVCC — 1.8V to 5.5V)
19NCI/OMultiplexed I/O & Peripheral Pin NC (General)
20NCI/OMultiplexed I/O & Peripheral Pin NC (General)
21AGNDGNDGround Reference Pin (AGND)
22PA3(AREF/PCINT3)I/OMultiplexed I/O & Peripheral Pin PA3(AREF/PCINT3) (ADC)
23IO12I/OGPIO12 / RTC_GPIO12 / TOUCH12 / ADC2_CH1 / FSPICLK
24NCI/OMultiplexed I/O & Peripheral Pin NC (General)
25PA1(ADC1/DO/PCINT1)I/OMultiplexed I/O & Peripheral Pin PA1(ADC1/DO/PCINT1) (ADC)
26IO21I/OGPIO21 / RTC_GPIO21
27NCI/OMultiplexed I/O & Peripheral Pin NC (General)
28NCI/OMultiplexed I/O & Peripheral Pin NC (General)
29NCI/OMultiplexed I/O & Peripheral Pin NC (General)
30IO30I/OGeneral Purpose Digital I/O Pin IO30
31IO31I/OGeneral Purpose Digital I/O Pin IO31
32IO32I/OGeneral Purpose Digital I/O Pin IO32
33EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 OC1A • OC1OE2
I/O
Multiplexed I/O & Peripheral Pin OC1A • OC1OE2 (PWM)
Design note: Signal terminal OC1A • OC1OE2 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: OC1A • OC1OE2. Supported peripheral buses: PWM.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY461-20MUR (VQFN-32(5x5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY461-20MUR (VQFN-32(5x5)) - 2. Standard Pinout (Top View)
True package pinout (33 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY461-20MUR (VQFN-32(5x5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY461-20MUR (VQFN-32(5x5)) - 4. Package Dimensions (D×E×A)
VQFN-32(5x5) · 5.00×5.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY461-20MUR (VQFN-32(5x5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (33 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY461-20MUR (VQFN-32(5x5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for ATTINY461
P1 · p01_fig01652×376px
ATTINY461-20MUR (VQFN-32(5x5)) — 8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash
8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash
P2 · p02_fig011694×2138px
ATTINY461-20MUR (VQFN-32(5x5)) — Figure 1-1. Pinout ATtiny261/461/861 and ATtiny261V/461V/861V
Figure 1-1. Pinout ATtiny261/461/861 and ATtiny261V/461V/861V
P98 · p98_fig011573×1926px
ATTINY461-20MUR (VQFN-32(5x5)) — Figure 12-10. Compare Match Output Unit, Schematic clkI/O
Figure 12-10. Compare Match Output Unit, Schematic clkI/O
P98 · p98_fig01P98
ATTINY461-20MUR (VQFN-32(5x5)) — Datasheet Page 98 (p98_fig01)
Datasheet Page 98 (p98_fig01)
P99 · p99_fig012050×866px
ATTINY461-20MUR (VQFN-32(5x5)) — Figure 12-11. Normal Mode, Timing Diagram
Figure 12-11. Normal Mode, Timing Diagram
P231 · p231_fig012050×2590px
ATTINY461-20MUR (VQFN-32(5x5)) — ATtiny261/461/861
ATtiny261/461/861
P231 · p231_fig01P231
ATTINY461-20MUR (VQFN-32(5x5)) — Datasheet Page 231 (p231_fig01)
Datasheet Page 231 (p231_fig01)
P17 · p17_fig012039×2175px
ATTINY461-20MUR (VQFN-32(5x5)) — 7.3 20M2 [PDIP-20]
7.3 20M2 [PDIP-20]
P2 · p02_fig02All Packages in PDF
ATTINY461-20MUR (VQFN-32(5x5)) — Figure 1-2. Pinout in 20-pad VQFN/WQFN. [PDIP-20]
Figure 1-2. Pinout in 20-pad VQFN/WQFN. [PDIP-20]
P15 · p15_fig01All Packages in PDF
ATTINY461-20MUR (VQFN-32(5x5)) — 15 ATtiny441/841 [SUMMARY DATASHEET] [PDIP-20]
15 ATtiny441/841 [SUMMARY DATASHEET] [PDIP-20]
P16 · p16_fig01All Packages in PDF
ATTINY461-20MUR (VQFN-32(5x5)) — 7.2 20M1 [PDIP-20]
7.2 20M1 [PDIP-20]

Technical Specifications & Part Details (ATTINY461-20MUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY461-20MUR (VQFN-32(5x5)) is a 32-pin standard electronic & interconnect component featuring a 5.00 × 5.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 5.5V supply operation across -65°C to +150°C with integrated SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 5.00 × 1.00 mm (A1=0.03 mm)
Package family: QFN (VQFN-32(5x5))
Pin Count & Lead PitchN / e
32 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol33 auto-grouped pins
OK
IPC-7351B Land Pattern33 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.10×3.10mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — ATTINY461 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (VQFN-32(5x5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
33P / 33Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
VQFN-32(5x5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY461-20MUR (VQFN-32(5x5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY461-20MUR (VQFN-32(5x5))?

Manufactured by MICROCHIP, the ATTINY461-20MUR is housed in a VQFN-32(5x5) package with 33 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (OC1A • OC1OE2: Multiplexed I/O & Peripheral Pin OC1A • OC1OE2 (PWM)), 2 ((OC1B/PCINT11)PB3: Multiplexed I/O & Peripheral Pin (OC1B/PCINT11)PB3 (PWM)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (VCC: Power Supply Input (VCC — 1.8V to 5.5V)), 5 (GND: Ground Reference Pin (GND)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY461-20MUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY461-20MUR (VQFN-32(5x5)) has a nominal body envelope of 5.00 × 5.00 mm, pitch e = 0.50 mm, and 33 copper pads plus a central exposed thermal pad (EPAD) of 3.10 × 3.10 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY461-20MUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY461-20MUR (MICROCHIP, VQFN-32(5x5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (33 pins) & ATTINY461 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OC1A • OC1OE2Digital_IOSignal terminal OC1A • OC1OE2 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: OC1A • OC1OE2. Supported peripheral buses: PWM.
2(OC1B/PCINT11)PB3Digital_IOSignal terminal (OC1B/PCINT11)PB3 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (OC1B/PCINT11)PB3. Supported peripheral buses: PWM.
3NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4VCCPower_InPrimary positive power supply input (VCC) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7NCNo_ConnectNo Connect (Leave Floating)
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
13(ADC6/AIN1/PCINT7)PA7AnalogSignal terminal (ADC6/AIN1/PCINT7)PA7 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (ADC6/AIN1/PCINT7)PA7. Supported peripheral buses: ADC.
14(ADC5/AIN0/PCINT6)PA6AnalogSignal terminal (ADC5/AIN0/PCINT6)PA6 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (ADC5/AIN0/PCINT6)PA6. Supported peripheral buses: ADC.
15(ADC4/AIN2/PCINT5)PA5AnalogSignal terminal (ADC4/AIN2/PCINT5)PA5 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: (ADC4/AIN2/PCINT5)PA5. Supported peripheral buses: ADC.
16NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
17PA4(ADC3/ICP0/PCINT4)AnalogSignal terminal PA4(ADC3/ICP0/PCINT4) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PA4(ADC3/ICP0/PCINT4). Supported peripheral buses: ADC.
18AVCCPower_InPrimary positive power supply input (AVCC) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
19NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
20NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
21AGNDGND0V electrical ground return terminal (AGND) for internal core logic, I/O drivers, and analog sub-blocks.
22PA3(AREF/PCINT3)Digital_IOSignal terminal PA3(AREF/PCINT3) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PA3(AREF/PCINT3). Supported peripheral buses: ADC.
23IO12Digital_IOGPIO12 / RTC_GPIO12 / TOUCH12 / ADC2_CH1 / FSPICLK
24NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
25PA1(ADC1/DO/PCINT1)AnalogSignal terminal PA1(ADC1/DO/PCINT1) (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: PA1(ADC1/DO/PCINT1). Supported peripheral buses: ADC.
26IO21Digital_IOGPIO21 / RTC_GPIO21
27NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
28NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
29NCNCSignal terminal NC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
30IO30Digital_IOGeneral Purpose Digital I/O Pin IO30
31IO31Digital_IOGeneral Purpose Digital I/O Pin IO31
32IO32Digital_IOGeneral Purpose Digital I/O Pin IO32
33EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.