ATTINY43U-MUR (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY43U-MUR

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY43U-MUR (QFN-20-EP(4x4))1(OC0B/PCINT92(T1/CLKO/PCI3(DI/OC1A/PCI4(DO/OC1B/PCI5(USCK/SCL/PC6(INT0/PCINT17VCC8GND9LSW10VBAT11PA0(ADC0/PCI21EP20PB1(OC0A/PCI19PB0(T0/PCINT18PA7(RESET#/d17PA6(CLKI)16PA5(AIN1/PCI15PA4(AIN0/PCI14PA3(ADC3/PCI13PA2(ADC2/PCI12PA1(ADC1/PCIGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1(OC0B/PCINT9)PB2I/OMultiplexed I/O & Peripheral Pin (OC0B/PCINT9)PB2 (PWM)
2(T1/CLKO/PCINT11)PB3I/OMultiplexed I/O & Peripheral Pin (T1/CLKO/PCINT11)PB3 (General)
3(DI/OC1A/PCINT12)PB4I/OMultiplexed I/O & Peripheral Pin (DI/OC1A/PCINT12)PB4 (PWM)
4(DO/OC1B/PCINT13)PB5I/OMultiplexed I/O & Peripheral Pin (DO/OC1B/PCINT13)PB5 (PWM)
5(USCK/SCL/PCINT14)PB6I/OMultiplexed I/O & Peripheral Pin (USCK/SCL/PCINT14)PB6 (I2C)
6(INT0/PCINT15)PB7I/OMultiplexed I/O & Peripheral Pin (INT0/PCINT15)PB7 (General)
7VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
8GNDGNDGround Reference Pin (GND)
9LSWI/OMultiplexed I/O & Peripheral Pin LSW (General)
10VBATPowerPower Supply Input (VBAT — 3.3V / 5.0V Standard Logic)
11PA0(ADC0/PCINT0)I/OMultiplexed I/O & Peripheral Pin PA0(ADC0/PCINT0) (ADC)
12PA1(ADC1/PCINT1)I/OMultiplexed I/O & Peripheral Pin PA1(ADC1/PCINT1) (ADC)
13PA2(ADC2/PCINT2)I/OMultiplexed I/O & Peripheral Pin PA2(ADC2/PCINT2) (ADC)
14PA3(ADC3/PCINT3)I/OMultiplexed I/O & Peripheral Pin PA3(ADC3/PCINT3) (ADC)
15PA4(AIN0/PCINT4)I/OMultiplexed I/O & Peripheral Pin PA4(AIN0/PCINT4) (ADC)
16PA5(AIN1/PCINT5)I/OMultiplexed I/O & Peripheral Pin PA5(AIN1/PCINT5) (ADC)
17PA6(CLKI)I/OMultiplexed I/O & Peripheral Pin PA6(CLKI) (General)
18PA7(RESET#/dW/PCINT7)ISystem Enable & Hardware Reset (PA7(RESET#/dW/PCINT7))
19PB0(T0/PCINT8)I/OMultiplexed I/O & Peripheral Pin PB0(T0/PCINT8) (General)
20PB1(OC0A/PCINT9)I/OMultiplexed I/O & Peripheral Pin PB1(OC0A/PCINT9) (PWM)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 (OC0B/PCINT9)PB2
I/O
Multiplexed I/O & Peripheral Pin (OC0B/PCINT9)PB2 (PWM)
Design note: Signal terminal (OC0B/PCINT9)PB2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (OC0B/PCINT9)PB2. Supported peripheral buses: PWM.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY43U-MUR (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY43U-MUR (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY43U-MUR (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY43U-MUR (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY43U-MUR (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY43U-MUR (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for ATTINY43U
P1 · p01_fig01652×376px
ATTINY43U-MUR (QFN-20-EP(4x4)) — 8-bit Microcontroller with 4K Bytes In-System Programmable Flash and Boost Converter
8-bit Microcontroller with 4K Bytes In-System Programmable Flash and Boost Converter
P2 · p02_fig011534×2075px
ATTINY43U-MUR (QFN-20-EP(4x4)) — Figure 1-1. Pinout of ATtiny43U
Figure 1-1. Pinout of ATtiny43U
P2 · p02_fig01P2
ATTINY43U-MUR (QFN-20-EP(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P12 · p12_fig012124×2569px
ATTINY43U-MUR (QFN-20-EP(4x4)) — 12 | 8048CS-AVR-02/12 ATtiny43U | 7. Packaging Information | 7.1 20M1 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20M1, 20-pad, 4 x 4 x 0.8 mm Body, Lead Pitch 0.50 mm, B 20M1 | 10/27/04 | 2.6 mm Exposed Pad, Mi
12 | 8048CS-AVR-02/12 ATtiny43U | 7. Packaging Information | 7.1 20M1 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20M1, 20-pad, 4 x 4 x 0.8 mm Body, Lead Pitch 0.50 mm, B 20M1 | 10/27/04 | 2.6 mm Exposed Pad, Mi
P12 · p12_fig01P12
ATTINY43U-MUR (QFN-20-EP(4x4)) — Datasheet Page 12 (p12_fig01)
Datasheet Page 12 (p12_fig01)
P16 · p16_fig01404×251px
ATTINY43U-MUR (QFN-20-EP(4x4)) — Headquarters International
Headquarters International

Technical Specifications & Part Details (ATTINY43U-MUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY43U-MUR (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.75 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated SPI, ADC, PWM, I2C interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.75 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, ADC, PWM, I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.75mm · e=0.50mm
Pad Size (W × L)Level B
0.27 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY43U-MUR (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY43U-MUR (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the ATTINY43U-MUR is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch. Key pins include: 1 ((OC0B/PCINT9)PB2: Multiplexed I/O & Peripheral Pin (OC0B/PCINT9)PB2 (PWM)), 2 ((T1/CLKO/PCINT11)PB3: Multiplexed I/O & Peripheral Pin (T1/CLKO/PCINT11)PB3 (General)), 3 ((DI/OC1A/PCINT12)PB4: Multiplexed I/O & Peripheral Pin (DI/OC1A/PCINT12)PB4 (PWM)), 4 ((DO/OC1B/PCINT13)PB5: Multiplexed I/O & Peripheral Pin (DO/OC1B/PCINT13)PB5 (PWM)), 5 ((USCK/SCL/PCINT14)PB6: Multiplexed I/O & Peripheral Pin (USCK/SCL/PCINT14)PB6 (I2C)), 6 ((INT0/PCINT15)PB7: Multiplexed I/O & Peripheral Pin (INT0/PCINT15)PB7 (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY43U-MUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY43U-MUR (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY43U-MUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY43U-MUR (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & ATTINY43U Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1(OC0B/PCINT9)PB2Digital_IOSignal terminal (OC0B/PCINT9)PB2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (OC0B/PCINT9)PB2. Supported peripheral buses: PWM.
2(T1/CLKO/PCINT11)PB3Digital_IOSignal terminal (T1/CLKO/PCINT11)PB3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (T1/CLKO/PCINT11)PB3. Supported peripheral buses: General.
3(DI/OC1A/PCINT12)PB4Digital_IOSignal terminal (DI/OC1A/PCINT12)PB4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (DI/OC1A/PCINT12)PB4. Supported peripheral buses: PWM.
4(DO/OC1B/PCINT13)PB5Digital_IOSignal terminal (DO/OC1B/PCINT13)PB5 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (DO/OC1B/PCINT13)PB5. Supported peripheral buses: PWM.
5(USCK/SCL/PCINT14)PB6Digital_IOSignal terminal (USCK/SCL/PCINT14)PB6 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (USCK/SCL/PCINT14)PB6. Supported peripheral buses: I2C.
6(INT0/PCINT15)PB7Digital_IOSignal terminal (INT0/PCINT15)PB7 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (INT0/PCINT15)PB7. Supported peripheral buses: General.
7VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9LSWDigital_IOSignal terminal LSW (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: LSW. Supported peripheral buses: General.
10VBATPower_InPrimary positive power supply input (VBAT) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
11PA0(ADC0/PCINT0)AnalogSignal terminal PA0(ADC0/PCINT0) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA0(ADC0/PCINT0). Supported peripheral buses: ADC.
12PA1(ADC1/PCINT1)AnalogSignal terminal PA1(ADC1/PCINT1) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA1(ADC1/PCINT1). Supported peripheral buses: ADC.
13PA2(ADC2/PCINT2)AnalogSignal terminal PA2(ADC2/PCINT2) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA2(ADC2/PCINT2). Supported peripheral buses: ADC.
14PA3(ADC3/PCINT3)AnalogSignal terminal PA3(ADC3/PCINT3) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA3(ADC3/PCINT3). Supported peripheral buses: ADC.
15PA4(AIN0/PCINT4)AnalogSignal terminal PA4(AIN0/PCINT4) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA4(AIN0/PCINT4). Supported peripheral buses: ADC.
16PA5(AIN1/PCINT5)AnalogSignal terminal PA5(AIN1/PCINT5) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA5(AIN1/PCINT5). Supported peripheral buses: ADC.
17PA6(CLKI)Digital_IOSignal terminal PA6(CLKI) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA6(CLKI). Supported peripheral buses: General.
18PA7(RESET#/dW/PCINT7)Digital_IOActive-low hardware reset terminal (PA7(RESET#/dW/PCINT7)): pulling this pin Low resets the processor core and peripherals.
19PB0(T0/PCINT8)Digital_IOSignal terminal PB0(T0/PCINT8) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB0(T0/PCINT8). Supported peripheral buses: General.
20PB1(OC0A/PCINT9)Digital_IOSignal terminal PB1(OC0A/PCINT9) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB1(OC0A/PCINT9). Supported peripheral buses: PWM.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.