ATTINY1634-SUR (SOIC-20-300mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY1634-SUR

MICROCHIPSOIC-20-300mil · 20 Pins · Pitch 1.27mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY1634-SUR (SOIC-20-300mil)1PB0(PCINT8/T2PA7(PCINT7/R3PA6(PCINT6/O4PA5(PCINT5/O5PA4(PCINT4/T6IO37PA2(PCINT2/A8PA1(PCINT1/A9PA0(PCINT0/A10GND20IO919IO2018PB3(ADC8/OC117IO816IO1815IO1714PC3(RESET#/d13PC4(XTAL2/PC12IO711VCCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617181920E=7.50mm · Pitch e=1.27mmD=12.80mm-9-7-5-3-11357997531-1-3-5-7-9mm
3. 3D CAD MODEL
Package Body: 7.50mm × 12.80mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (20/20)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1PB0(PCINT8/TXD0/ADC5)I/OMultiplexed I/O & Peripheral Pin PB0(PCINT8/TXD0/ADC5) (UART, ADC)
2PA7(PCINT7/RXD0/ADC4)I/OMultiplexed I/O & Peripheral Pin PA7(PCINT7/RXD0/ADC4) (UART, ADC)
3PA6(PCINT6/OC1B/ADC3)I/OMultiplexed I/O & Peripheral Pin PA6(PCINT6/OC1B/ADC3) (ADC, PWM)
4PA5(PCINT5/OC0B/ADC2)I/OMultiplexed I/O & Peripheral Pin PA5(PCINT5/OC0B/ADC2) (ADC, PWM)
5PA4(PCINT4/T0/ADC1)I/OMultiplexed I/O & Peripheral Pin PA4(PCINT4/T0/ADC1) (ADC)
6IO3I/OGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7PA2(PCINT2/AIN1)I/OMultiplexed I/O & Peripheral Pin PA2(PCINT2/AIN1) (ADC)
8PA1(PCINT1/AIN0)I/OMultiplexed I/O & Peripheral Pin PA1(PCINT1/AIN0) (ADC)
9PA0(PCINT0/AREF)I/OMultiplexed I/O & Peripheral Pin PA0(PCINT0/AREF) (ADC)
10GNDGNDGround Reference Pin (GND)
11VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
12IO7I/OGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13PC4(XTAL2/PCINT16)I/OMultiplexed I/O & Peripheral Pin PC4(XTAL2/PCINT16) (RTC/CLK)
14PC3(RESET#/dW/PCINT15)ISystem Enable & Hardware Reset (PC3(RESET#/dW/PCINT15))
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18I/OGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17IO8I/OGPIO8 / RTC_GPIO8 / TOUCH8 / ADC1_CH7 / SUBSPICS1
18PB3(ADC8/OC1A/PCINT11)I/OMultiplexed I/O & Peripheral Pin PB3(ADC8/OC1A/PCINT11) (ADC, PWM)
19IO20I/OGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
PIN 1 PB0(PCINT8/TXD0/ADC5)
I/O
Multiplexed I/O & Peripheral Pin PB0(PCINT8/TXD0/ADC5) (UART, ADC)
Design note: Signal terminal PB0(PCINT8/TXD0/ADC5) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB0(PCINT8/TXD0/ADC5). Supported peripheral buses: UART, ADC.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 4 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY1634-SUR (SOIC-20-300mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY1634-SUR (SOIC-20-300mil) - 2. Standard Pinout (Top View)
True package pinout (20 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY1634-SUR (SOIC-20-300mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY1634-SUR (SOIC-20-300mil) - 4. Package Dimensions (D×E×A)
SOIC-20-300mil · 7.50×12.80mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY1634-SUR (SOIC-20-300mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (20 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY1634-SUR (SOIC-20-300mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (4 figures · Page 1/1)
Showing 1–4 of 4 uncropped original figures for ATTINY1634
P2 · p02_fig01P2
ATTINY1634-SUR (SOIC-20-300mil) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P4 · p04_fig011577×1645px
ATTINY1634-SUR (SOIC-20-300mil) — Figure 2-1. Block Diagram
Figure 2-1. Block Diagram
P2 · p02_fig01All Packages in PDF
ATTINY1634-SUR (SOIC-20-300mil) — Figure 1-1. Pinout of ATtiny1634
Figure 1-1. Pinout of ATtiny1634
P12 · p12_fig01All Packages in PDF
ATTINY1634-SUR (SOIC-20-300mil) — 12 ATtiny1634 [DATASHEET]
12 ATtiny1634 [DATASHEET]

Technical Specifications & Part Details (ATTINY1634-SUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY1634-SUR (SOIC-20-300mil) is a 20-pin standard electronic & interconnect component featuring a 12.80 × 7.50 × 2.50 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated SPI, I2C, ADC, PWM, RTC/CLK, UART interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
8MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
12.80 × 7.50 × 2.50 mm (A1=0.20 mm)
Package family: SOIC (SOIC-20-300mil)
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, I2C, ADC, PWM, RTC/CLK, UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol20 auto-grouped pins
OK
IPC-7351B Land Pattern20 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-20-300mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
12.80 × 7.50 mm
Height (A) & Pitch (e)IPC-7351B
A=2.50mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.90 mm
Pins / Total PadsTopology
20P / 20Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-20-300mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY1634-SUR (SOIC-20-300mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY1634-SUR (SOIC-20-300mil)?

Manufactured by MICROCHIP, the ATTINY1634-SUR is housed in a SOIC-20-300mil package with 20 pins and a 1.27 mm lead pitch. Key pins include: 1 (PB0(PCINT8/TXD0/ADC5): Multiplexed I/O & Peripheral Pin PB0(PCINT8/TXD0/ADC5) (UART, ADC)), 2 (PA7(PCINT7/RXD0/ADC4): Multiplexed I/O & Peripheral Pin PA7(PCINT7/RXD0/ADC4) (UART, ADC)), 3 (PA6(PCINT6/OC1B/ADC3): Multiplexed I/O & Peripheral Pin PA6(PCINT6/OC1B/ADC3) (ADC, PWM)), 4 (PA5(PCINT5/OC0B/ADC2): Multiplexed I/O & Peripheral Pin PA5(PCINT5/OC0B/ADC2) (ADC, PWM)), 5 (PA4(PCINT4/T0/ADC1): Multiplexed I/O & Peripheral Pin PA4(PCINT4/T0/ADC1) (ADC)), 6 (IO3: GPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY1634-SUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY1634-SUR (SOIC-20-300mil) has a nominal body envelope of 7.50 × 12.80 mm, pitch e = 1.27 mm, and 20 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY1634-SUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY1634-SUR (MICROCHIP, SOIC-20-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (20 pins) & ATTINY1634 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1PB0(PCINT8/TXD0/ADC5)Digital_IOSignal terminal PB0(PCINT8/TXD0/ADC5) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB0(PCINT8/TXD0/ADC5). Supported peripheral buses: UART, ADC.
2PA7(PCINT7/RXD0/ADC4)Digital_IOSignal terminal PA7(PCINT7/RXD0/ADC4) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA7(PCINT7/RXD0/ADC4). Supported peripheral buses: UART, ADC.
3PA6(PCINT6/OC1B/ADC3)AnalogSignal terminal PA6(PCINT6/OC1B/ADC3) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA6(PCINT6/OC1B/ADC3). Supported peripheral buses: ADC, PWM.
4PA5(PCINT5/OC0B/ADC2)AnalogSignal terminal PA5(PCINT5/OC0B/ADC2) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA5(PCINT5/OC0B/ADC2). Supported peripheral buses: ADC, PWM.
5PA4(PCINT4/T0/ADC1)AnalogSignal terminal PA4(PCINT4/T0/ADC1) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA4(PCINT4/T0/ADC1). Supported peripheral buses: ADC.
6IO3Digital_IOGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7PA2(PCINT2/AIN1)AnalogSignal terminal PA2(PCINT2/AIN1) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA2(PCINT2/AIN1). Supported peripheral buses: ADC.
8PA1(PCINT1/AIN0)AnalogSignal terminal PA1(PCINT1/AIN0) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA1(PCINT1/AIN0). Supported peripheral buses: ADC.
9PA0(PCINT0/AREF)Digital_IOSignal terminal PA0(PCINT0/AREF) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA0(PCINT0/AREF). Supported peripheral buses: ADC.
10GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
11VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
12IO7Digital_IOGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13PC4(XTAL2/PCINT16)Digital_IOSignal terminal PC4(XTAL2/PCINT16) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC4(XTAL2/PCINT16). Supported peripheral buses: RTC/CLK.
14PC3(RESET#/dW/PCINT15)Digital_IOActive-low hardware reset terminal (PC3(RESET#/dW/PCINT15)): pulling this pin Low resets the processor core and peripherals.
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18Digital_IOGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17IO8Digital_IOGPIO8 / RTC_GPIO8 / TOUCH8 / ADC1_CH7 / SUBSPICS1
18PB3(ADC8/OC1A/PCINT11)AnalogSignal terminal PB3(ADC8/OC1A/PCINT11) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB3(ADC8/OC1A/PCINT11). Supported peripheral buses: ADC, PWM.
19IO20Digital_IOGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD