ATSAMD21E17D-AU (TQFP-32(7x7)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATSAMD21E17D-AU

MICROCHIPTQFP-32(7x7) · 32 Pins · Pitch 0.80mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATSAMD21E17D-AU (TQFP-32(7x7))1IO12PA013PA024PA035PA046PA057PA068PA079VDDANA10GND11PA0812PA0913PA1014PA1115PA1416PA1532PA3131PA3030VDDIN29VDDCORE28GND27PA2826RESET#25PA2724PA2523PA2422PA2321PA2220PA1919PA1818PA1717PA16Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132E=7.00mm · Pitch e=0.80mmD=7.00mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 7.00mm × 7.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (32/32)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2PA01I/OMultiplexed I/O & Peripheral Pin PA01 (General)
3PA02I/OMultiplexed I/O & Peripheral Pin PA02 (General)
4PA03I/OMultiplexed I/O & Peripheral Pin PA03 (General)
5PA04I/OMultiplexed I/O & Peripheral Pin PA04 (General)
6PA05I/OMultiplexed I/O & Peripheral Pin PA05 (General)
7PA06I/OMultiplexed I/O & Peripheral Pin PA06 (General)
8PA07I/OMultiplexed I/O & Peripheral Pin PA07 (General)
9VDDANAPowerPower Supply Input (VDDANA — 1.62V – 3.63V)
10GNDGNDGround Reference Pin (GND)
11PA08I/OMultiplexed I/O & Peripheral Pin PA08 (General)
12PA09I/OMultiplexed I/O & Peripheral Pin PA09 (General)
13PA10I/OMultiplexed I/O & Peripheral Pin PA10 (General)
14PA11I/OMultiplexed I/O & Peripheral Pin PA11 (General)
15PA14I/OMultiplexed I/O & Peripheral Pin PA14 (General)
16PA15I/OMultiplexed I/O & Peripheral Pin PA15 (General)
17PA16I/OMultiplexed I/O & Peripheral Pin PA16 (General)
18PA17I/OMultiplexed I/O & Peripheral Pin PA17 (General)
19PA18I/OMultiplexed I/O & Peripheral Pin PA18 (General)
20PA19I/OMultiplexed I/O & Peripheral Pin PA19 (General)
21PA22I/OMultiplexed I/O & Peripheral Pin PA22 (General)
22PA23I/OMultiplexed I/O & Peripheral Pin PA23 (General)
23PA24I/OMultiplexed I/O & Peripheral Pin PA24 (General)
24PA25I/OMultiplexed I/O & Peripheral Pin PA25 (General)
25PA27I/OMultiplexed I/O & Peripheral Pin PA27 (General)
26RESET#ISystem Enable & Hardware Reset (RESET#)
27PA28I/OMultiplexed I/O & Peripheral Pin PA28 (General)
28GNDGNDGround Reference Pin (GND)
29VDDCOREPowerPower Supply Input (VDDCORE — 1.62V – 3.63V)
30VDDINPowerPower Supply Input (VDDIN — 1.62V – 3.63V)
31PA30I/OMultiplexed I/O & Peripheral Pin PA30 (General)
32PA31I/OMultiplexed I/O & Peripheral Pin PA31 (General)
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATSAMD21E17D-AU (TQFP-32(7x7)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATSAMD21E17D-AU (TQFP-32(7x7)) - 2. Standard Pinout (Top View)
True package pinout (32 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATSAMD21E17D-AU (TQFP-32(7x7)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATSAMD21E17D-AU (TQFP-32(7x7)) - 4. Package Dimensions (D×E×A)
TQFP-32(7x7) · 7.00×7.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATSAMD21E17D-AU (TQFP-32(7x7)) - 5. Recommended Land Pattern
IPC-7351B Footprint (32 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATSAMD21E17D-AU (TQFP-32(7x7)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for ATSAMD21E17D
P1 · p01_fig01456×280px
ATSAMD21E17D-AU (TQFP-32(7x7)) — Low-Power, 32-bit Cortex-M0+ MCU with Advanced Analog and PWM
Low-Power, 32-bit Cortex-M0+ MCU with Advanced Analog and PWM
P19 · p19_fig011385×1230px
ATSAMD21E17D-AU (TQFP-32(7x7)) — DIGITAL PIN ANALOG PIN OSCILLATOR GROUND INPUT SUPPLY REGULATED OUTPUT SUPPLY RESET PIN
DIGITAL PIN ANALOG PIN OSCILLATOR GROUND INPUT SUPPLY REGULATED OUTPUT SUPPLY RESET PIN
P19 · p19_fig01P19
ATSAMD21E17D-AU (TQFP-32(7x7)) — Datasheet Page 19 (p19_fig01)
Datasheet Page 19 (p19_fig01)
P368 · p368_fig011478×828px
ATSAMD21E17D-AU (TQFP-32(7x7)) — Figure 23-4. I/O configuration - Standard Input
Figure 23-4. I/O configuration - Standard Input
P368 · p368_fig02871×755px
ATSAMD21E17D-AU (TQFP-32(7x7)) — Figure 23-4. I/O configuration - Standard Input
Figure 23-4. I/O configuration - Standard Input
P1066 · p1066_fig011397×1591px
ATSAMD21E17D-AU (TQFP-32(7x7)) — Microchip Technology Drawing C04-23153 Rev A
Microchip Technology Drawing C04-23153 Rev A
P1066 · p1066_fig01P1066
ATSAMD21E17D-AU (TQFP-32(7x7)) — Datasheet Page 1066 (p1066_fig01)
Datasheet Page 1066 (p1066_fig01)
P1082 · p1082_fig011215×818px
ATSAMD21E17D-AU (TQFP-32(7x7)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P1084 · p1084_fig011386×1549px
ATSAMD21E17D-AU (TQFP-32(7x7)) — Microchip Technology Drawing C04-074 Rev C Sheet 1 of 2
Microchip Technology Drawing C04-074 Rev C Sheet 1 of 2
P1084 · p1084_fig01P1084
ATSAMD21E17D-AU (TQFP-32(7x7)) — Datasheet Page 1084 (p1084_fig01)
Datasheet Page 1084 (p1084_fig01)
P1086 · p1086_fig011221×1011px
ATSAMD21E17D-AU (TQFP-32(7x7)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P1109 · p1109_fig011218×814px
ATSAMD21E17D-AU (TQFP-32(7x7)) — Figure 45-2. External Analog Reference Schematic With Two References
Figure 45-2. External Analog Reference Schematic With Two References
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (ATSAMD21E17D-AU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATSAMD21E17D-AU (TQFP-32(7x7)) is a 32-pin standard electronic & interconnect component featuring a 7.00 × 7.00 × 1.00 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 1.62V – 3.63V supply operation across -40°C to 125°C with integrated USB, UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD interfaces.
Operating Supply VoltageV_CC / V_DD
1.62V – 3.63V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to 125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
48 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
7.00 × 7.00 × 1.00 mm (A1=0.10 mm)
Package family: TQFP (TQFP-32(7x7))
Pin Count & Lead PitchN / e
32 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol32 auto-grouped pins
OK
IPC-7351B Land Pattern32 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TQFP-32(7x7))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
7.00 × 7.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.80mm
Pad Size (W × L)Level B
0.50 × 1.50 mm
Pins / Total PadsTopology
32P / 32Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-32(7x7)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATSAMD21E17D-AU (TQFP-32(7x7))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATSAMD21E17D-AU (TQFP-32(7x7))?

Manufactured by MICROCHIP, the ATSAMD21E17D-AU is housed in a TQFP-32(7x7) package with 32 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 1.62V – 3.63V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 (PA01: Multiplexed I/O & Peripheral Pin PA01 (General)), 3 (PA02: Multiplexed I/O & Peripheral Pin PA02 (General)), 4 (PA03: Multiplexed I/O & Peripheral Pin PA03 (General)), 5 (PA04: Multiplexed I/O & Peripheral Pin PA04 (General)), 6 (PA05: Multiplexed I/O & Peripheral Pin PA05 (General)).

What are the IPC-7351B PCB Footprint dimensions for ATSAMD21E17D-AU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATSAMD21E17D-AU (TQFP-32(7x7)) has a nominal body envelope of 7.00 × 7.00 mm, pitch e = 0.80 mm, and 32 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATSAMD21E17D-AU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATSAMD21E17D-AU (MICROCHIP, TQFP-32(7x7)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (32 pins) & ATSAMD21E17D Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2PA01Digital_IOSignal terminal PA01 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA01. Supported peripheral buses: General.
3PA02Digital_IOSignal terminal PA02 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA02. Supported peripheral buses: General.
4PA03Digital_IOSignal terminal PA03 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA03. Supported peripheral buses: General.
5PA04Digital_IOSignal terminal PA04 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA04. Supported peripheral buses: General.
6PA05Digital_IOSignal terminal PA05 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA05. Supported peripheral buses: General.
7PA06Digital_IOSignal terminal PA06 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA06. Supported peripheral buses: General.
8PA07Digital_IOSignal terminal PA07 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA07. Supported peripheral buses: General.
9VDDANAPower_InPrimary positive power supply input (VDDANA) operating in the 1.62V – 3.63V domain (Max rating: 3.63V).
10GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
11PA08Digital_IOSignal terminal PA08 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA08. Supported peripheral buses: General.
12PA09Digital_IOSignal terminal PA09 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA09. Supported peripheral buses: General.
13PA10Digital_IOSignal terminal PA10 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA10. Supported peripheral buses: General.
14PA11Digital_IOSignal terminal PA11 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA11. Supported peripheral buses: General.
15PA14Digital_IOSignal terminal PA14 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA14. Supported peripheral buses: General.
16PA15Digital_IOSignal terminal PA15 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA15. Supported peripheral buses: General.
17PA16Digital_IOSignal terminal PA16 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA16. Supported peripheral buses: General.
18PA17Digital_IOSignal terminal PA17 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA17. Supported peripheral buses: General.
19PA18Digital_IOSignal terminal PA18 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA18. Supported peripheral buses: General.
20PA19Digital_IOSignal terminal PA19 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA19. Supported peripheral buses: General.
21PA22Digital_IOSignal terminal PA22 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA22. Supported peripheral buses: General.
22PA23Digital_IOSignal terminal PA23 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA23. Supported peripheral buses: General.
23PA24Digital_IOSignal terminal PA24 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA24. Supported peripheral buses: General.
24PA25Digital_IOSignal terminal PA25 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA25. Supported peripheral buses: General.
25PA27Digital_IOSignal terminal PA27 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA27. Supported peripheral buses: General.
26RESET#Digital_IOActive-low hardware reset terminal (RESET#): pulling this pin Low resets the processor core and peripherals.
27PA28Digital_IOSignal terminal PA28 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA28. Supported peripheral buses: General.
28GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
29VDDCOREPower_InPrimary positive power supply input (VDDCORE) operating in the 1.62V – 3.63V domain (Max rating: 3.63V).
30VDDINPower_InPrimary positive power supply input (VDDIN) operating in the 1.62V – 3.63V domain (Max rating: 3.63V).
31PA30Digital_IOSignal terminal PA30 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA30. Supported peripheral buses: General.
32PA31Digital_IOSignal terminal PA31 (I/O, 1.62V – 3.63V domain). Multiplexed alternate functions: PA31. Supported peripheral buses: General.