AT25080AN-10SU-2.7-T (SOIC-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT25080AN-10SU-2.7-T

MICROCHIPSOIC-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT25080AN-10SU-2.7-T (SOIC-8)1CS#2SO3WP#4GND8VCC7HOLD#6SCK5SIGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CS#I/OMultiplexed I/O & Peripheral Pin CS# (General)
2SOI/OMultiplexed I/O & Peripheral Pin SO (General)
3WP#I/OMultiplexed I/O & Peripheral Pin WP# (General)
4GNDGNDGround Reference Pin (GND)
5SII/OMultiplexed I/O & Peripheral Pin SI (General)
6SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
7HOLD#I/OMultiplexed I/O & Peripheral Pin HOLD# (General)
8VCCPowerPower Supply Input (VCC — 2.7V to 5.5V)
PIN 1 CS#
I/O
Multiplexed I/O & Peripheral Pin CS# (General)
Design note: Signal terminal CS# (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CS#. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT25080AN-10SU-2.7-T (SOIC-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT25080AN-10SU-2.7-T (SOIC-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT25080AN-10SU-2.7-T (SOIC-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT25080AN-10SU-2.7-T (SOIC-8) - 4. Package Dimensions (D×E×A)
SOIC-8 · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT25080AN-10SU-2.7-T (SOIC-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT25080AN-10SU-2.7-T (SOIC-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for AT25080 / AT25320 / AT25640
P2 · p02_fig01EXACT PACKAGE
AT25080AN-10SU-2.7-T (SOIC-8) — 1 2 3 4 | 8 7 6 5 | CS SO WP GND | VCC HOLD SCK SI | 8-lead PDIP | 1 2 3 4 | 8 7 6 5 | CS SO WP GND | VCC HOLD SCK SI | 8-lead SOIC | 1 2 3 4 | 8 7 6 5 | CS SO WP GND | VCC HOLD SCK SI | 8-lead TSSOP | 1 2 3 4 | 8 7 6 5 | VCC HOLD SCK SI |
1 2 3 4 | 8 7 6 5 | CS SO WP GND | VCC HOLD SCK SI | 8-lead PDIP | 1 2 3 4 | 8 7 6 5 | CS SO WP GND | VCC HOLD SCK SI | 8-lead SOIC | 1 2 3 4 | 8 7 6 5 | CS SO WP GND | VCC HOLD SCK SI | 8-lead TSSOP | 1 2 3 4 | 8 7 6 5 | VCC HOLD SCK SI |
P20 · p20_fig01EXACT PACKAGE
AT25080AN-10SU-2.7-T (SOIC-8) — 20 | 3347L-SEEPR-06/07 AT25080A/160A/320A/640A | 8S1 - JEDEC SOIC | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. | Note: | 10/7/03 | 8S1, 8-lead (0.150" Wide Body), Plastic Gull Wing Small Outline (J
20 | 3347L-SEEPR-06/07 AT25080A/160A/320A/640A | 8S1 - JEDEC SOIC | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. | Note: | 10/7/03 | 8S1, 8-lead (0.150" Wide Body), Plastic Gull Wing Small Outline (J
P1 · p01_fig01522×242px
AT25080AN-10SU-2.7-T (SOIC-8) — SPI Serial EEPROMs 8K (1024 x 8) 16K (2048 x 8) 32K (4096 x 8) 64K (8192 x 8)
SPI Serial EEPROMs 8K (1024 x 8) 16K (2048 x 8) 32K (4096 x 8) 64K (8192 x 8)
P1 · p01_fig01P1
AT25080AN-10SU-2.7-T (SOIC-8) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P20 · p20_fig01P20
AT25080AN-10SU-2.7-T (SOIC-8) — Datasheet Page 20 (p20_fig01)
Datasheet Page 20 (p20_fig01)
P24 · p24_fig012124×2747px
AT25080AN-10SU-2.7-T (SOIC-8) — 24 | 3347L-SEEPR-06/07 AT25080A/160A/320A/640A | 8D3 - ULLGA | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. 8D3, 8-lead (1.80 x 2.20 mm Body) Ultra Leadframe Land Grid Array (ULLGA) D3 0 8D3 | 11/15/
24 | 3347L-SEEPR-06/07 AT25080A/160A/320A/640A | 8D3 - ULLGA | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. 8D3, 8-lead (1.80 x 2.20 mm Body) Ultra Leadframe Land Grid Array (ULLGA) D3 0 8D3 | 11/15/
P19 · p19_fig01All Packages in PDF
AT25080AN-10SU-2.7-T (SOIC-8) — 19 | 3347L-SEEPR-06/07 | AT25080A/160A/320A/640A | 9. Packaging Information | 8P3 - PDIP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 8P3, 8-lead, 0.300" Wide Body, Plastic Dual In-line Package (PDIP) | 01/09/02
19 | 3347L-SEEPR-06/07 | AT25080A/160A/320A/640A | 9. Packaging Information | 8P3 - PDIP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 8P3, 8-lead, 0.300" Wide Body, Plastic Dual In-line Package (PDIP) | 01/09/02

Technical Specifications & Part Details (AT25080AN-10SU-2.7-T)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT25080AN-10SU-2.7-T (SOIC-8) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.75 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.7V to 5.5V supply operation across 0°C to 70°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to 70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.75 mm (A1=0.17 mm)
Package family: SOIC (SOIC-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.75mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT25080AN-10SU-2.7-T (SOIC-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT25080AN-10SU-2.7-T (SOIC-8)?

Manufactured by MICROCHIP, the AT25080AN-10SU-2.7-T is housed in a SOIC-8 package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (CS#: Multiplexed I/O & Peripheral Pin CS# (General)), 2 (SO: Multiplexed I/O & Peripheral Pin SO (General)), 3 (WP#: Multiplexed I/O & Peripheral Pin WP# (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SI: Multiplexed I/O & Peripheral Pin SI (General)), 6 (SCK: Multiplexed I/O & Peripheral Pin SCK (SPI)).

What are the IPC-7351B PCB Footprint dimensions for AT25080AN-10SU-2.7-T?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT25080AN-10SU-2.7-T (SOIC-8) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT25080AN-10SU-2.7-T?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT25080AN-10SU-2.7-T (MICROCHIP, SOIC-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & AT25080 / AT25320 / AT25640 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CS#Digital_IOSignal terminal CS# (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CS#. Supported peripheral buses: General.
2SODigital_IOSignal terminal SO (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
3WP#Digital_IOSignal terminal WP# (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: WP#. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SIDigital_IOSignal terminal SI (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
6SCKDigital_IOSignal terminal SCK (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.
7HOLD#Digital_IOSignal terminal HOLD# (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: HOLD#. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).