AT24C01A-10PU-1.8 (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT24C01A-10PU-1.8

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT24C01A-10PU-1.8 (PDIP-8)1A02A13A24GND8VCC7WP6SCL5SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=0.31mm · Pitch e=2.54mmD=0.36mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 0.31mm × 0.36mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1A0I/OMultiplexed I/O & Peripheral Pin A0 (General)
2A1I/OMultiplexed I/O & Peripheral Pin A1 (General)
3A2I/OMultiplexed I/O & Peripheral Pin A2 (General)
4GNDGNDGround Reference Pin (GND)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
7WPI/OMultiplexed I/O & Peripheral Pin WP (General)
8VCCPowerPower Supply Input (VCC — 2.7V to 5.5V)
PIN 1 A0
I/O
Multiplexed I/O & Peripheral Pin A0 (General)
Design note: Signal terminal A0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A0. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT24C01A-10PU-1.8 (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT24C01A-10PU-1.8 (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT24C01A-10PU-1.8 (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT24C01A-10PU-1.8 (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 0.31×0.36mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT24C01A-10PU-1.8 (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT24C01A-10PU-1.8 (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for AT24C01A
P18 · p18_fig01EXACT PACKAGE
AT24C01A-10PU-1.8 (PDIP-8) — 18 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | Packaging Information | 8P3 - PDIP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 8P3, 8-lead, 0.300" Wide Body, Plastic Dual In-line Package (PDIP) | 01/09/02 | 8P3
18 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | Packaging Information | 8P3 - PDIP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 8P3, 8-lead, 0.300" Wide Body, Plastic Dual In-line Package (PDIP) | 01/09/02 | 8P3
P1 · p01_fig01652×503px
AT24C01A-10PU-1.8 (PDIP-8) — 1K (128 x 8)
1K (128 x 8)
P1 · p01_fig021478×965px
AT24C01A-10PU-1.8 (PDIP-8) — Table 1. Pin Configuration | Pin Name Function | A0 - A2 Address Inputs | SDA Serial Data | SCL Serial Clock Input | WP Write Protect | NC No Connect | GND Ground | VCC Power Supply | AT24C04 AT24C08A AT24C16A(3) | Notes: 1. Not Recommended
Table 1. Pin Configuration | Pin Name Function | A0 - A2 Address Inputs | SDA Serial Data | SCL Serial Clock Input | WP Write Protect | NC No Connect | GND Ground | VCC Power Supply | AT24C04 AT24C08A AT24C16A(3) | Notes: 1. Not Recommended
P2 · p02_fig011523×1286px
AT24C01A-10PU-1.8 (PDIP-8) — Figure 1. Block Diagram
Figure 1. Block Diagram
P18 · p18_fig01P18
AT24C01A-10PU-1.8 (PDIP-8) — Datasheet Page 18 (p18_fig01)
Datasheet Page 18 (p18_fig01)
P24 · p24_fig012124×2602px
AT24C01A-10PU-1.8 (PDIP-8) — 24 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8U2 - dBGA2 | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. 8U2, 8-ball 0.75 pitch, Die Ball Grid Array Package (dBGA) AT24C512 (AT19870) | 02/04/02 | 8
24 AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8U2 - dBGA2 | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. 8U2, 8-ball 0.75 pitch, Die Ball Grid Array Package (dBGA) AT24C512 (AT19870) | 02/04/02 | 8
P25 · p25_fig012124×2773px
AT24C01A-10PU-1.8 (PDIP-8) — 25 | AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8U3-1 - dBGA2 | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. | PO8U3-1 A | 6/24/03 | COMMON DIMENSIONS (Unit of Measure = mm) | SYMBOL MIN NOM MAX NO
25 | AT24C01A/02/04/08A/16A | 0180Z1-SEEPR-5/07 | 8U3-1 - dBGA2 | 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 | TITLE DRAWING NO. | R | REV. | PO8U3-1 A | 6/24/03 | COMMON DIMENSIONS (Unit of Measure = mm) | SYMBOL MIN NOM MAX NO

Technical Specifications & Part Details (AT24C01A-10PU-1.8)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT24C01A-10PU-1.8 (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 0.36 × 0.31 × 3.85 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 2.7V to 5.5V supply operation across 55°C to +125°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
55°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
0.36 × 0.31 × 3.85 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
0.36 × 0.31 mm
Height (A) & Pitch (e)IPC-7351B
A=3.85mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT24C01A-10PU-1.8 (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT24C01A-10PU-1.8 (PDIP-8)?

Manufactured by MICROCHIP, the AT24C01A-10PU-1.8 is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (A0: Multiplexed I/O & Peripheral Pin A0 (General)), 2 (A1: Multiplexed I/O & Peripheral Pin A1 (General)), 3 (A2: Multiplexed I/O & Peripheral Pin A2 (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)).

What are the IPC-7351B PCB Footprint dimensions for AT24C01A-10PU-1.8?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT24C01A-10PU-1.8 (PDIP-8) has a nominal body envelope of 0.31 × 0.36 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT24C01A-10PU-1.8?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT24C01A-10PU-1.8 (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & AT24C01A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1A0Digital_IOSignal terminal A0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A0. Supported peripheral buses: General.
2A1Digital_IOSignal terminal A1 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A1. Supported peripheral buses: General.
3A2Digital_IOSignal terminal A2 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A2. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
7WPDigital_IOSignal terminal WP (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).