APT70GR120B2 (TO-247) — Symbol, Footprint IPC-7351B & 3D STEP Model

APT70GR120B2

MICROCHIPTO-247 · 3 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · APT70GR120B2 (TO-247)1G2C3EGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123E=15.80mm · Pitch e=0.50mmD=5.00mm-12-10-8-6-4-20246810126420-2-4-6mm
3. 3D CAD MODEL
Package Body: 15.80mm × 5.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (3/3)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GI/OMultiplexed I/O & Peripheral Pin G (General)
2CI/OMultiplexed I/O & Peripheral Pin C (General)
3EI/OMultiplexed I/O & Peripheral Pin E (General)
PIN 1 G
I/O
Multiplexed I/O & Peripheral Pin G (General)
Design note: Signal terminal G (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: G. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
APT70GR120B2 (TO-247) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
APT70GR120B2 (TO-247) - 2. Standard Pinout (Top View)
True package pinout (3 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
APT70GR120B2 (TO-247) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
APT70GR120B2 (TO-247) - 4. Package Dimensions (D×E×A)
TO-247 · 15.80×5.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
APT70GR120B2 (TO-247) - 5. Recommended Land Pattern
IPC-7351B Footprint (3 Pads)Expand ›
6. Application SchematicSCHEMATIC
APT70GR120B2 (TO-247) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for APT70GR120B2 / APT70GR120L
P1 · p01_fig01896×196px
APT70GR120B2 (TO-247) — Ultra Fast NPT - IGBT®
Ultra Fast NPT - IGBT®
P1 · p01_fig02652×704px
APT70GR120B2 (TO-247) — • High Frequency Switching
• High Frequency Switching
P2 · p02_fig011465×641px
APT70GR120B2 (TO-247) — RECTANGULAR PULSE DURATION (SECONDS) Figure 1, Maximum Effective Transient Thermal Impedance, Junction-To-Case vs Pulse Duration
RECTANGULAR PULSE DURATION (SECONDS) Figure 1, Maximum Effective Transient Thermal Impedance, Junction-To-Case vs Pulse Duration
P3 · p03_fig011613×2193px
APT70GR120B2 (TO-247) — 150
150
P3 · p03_fig02703×901px
APT70GR120B2 (TO-247) — FIGURE 6, Transfer Characteristics
FIGURE 6, Transfer Characteristics
P4 · p04_fig01896×2712px
APT70GR120B2 (TO-247) — FIGURE 16, Swiitching Energy vs Junction Temperature
FIGURE 16, Swiitching Energy vs Junction Temperature
P4 · p04_fig02949×2101px
APT70GR120B2 (TO-247) — FIGURE 15, Energy Loss vs Gate Resistance
FIGURE 15, Energy Loss vs Gate Resistance
P5 · p05_fig011780×900px
APT70GR120B2 (TO-247) — T-MAXTM (B2) Package Outline TO-264 (L) Package Outline
T-MAXTM (B2) Package Outline TO-264 (L) Package Outline
P5 · p05_fig01P5
APT70GR120B2 (TO-247) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)

Technical Specifications & Part Details (APT70GR120B2)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:APT70GR120B2 (TO-247) is a 3-pin standard electronic & interconnect component featuring a 15.80 × 5.00 × 2.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
15.80 × 5.00 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (TO-247)
Pin Count & Lead PitchN / e
3 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol3 auto-grouped pins
OK
IPC-7351B Land Pattern3 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 13.68×2.20mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — APT70GR120B2 / APT70GR120L (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TO-247)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
15.80 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
3P / 3Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-247
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — APT70GR120B2 (TO-247)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of APT70GR120B2 (TO-247)?

Manufactured by MICROCHIP, the APT70GR120B2 is housed in a TO-247 package with 3 pins and a 0.50 mm lead pitch. Key pins include: 1 (G: Multiplexed I/O & Peripheral Pin G (General)), 2 (C: Multiplexed I/O & Peripheral Pin C (General)), 3 (E: Multiplexed I/O & Peripheral Pin E (General)).

What are the IPC-7351B PCB Footprint dimensions for APT70GR120B2?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), APT70GR120B2 (TO-247) has a nominal body envelope of 5.00 × 15.80 mm, pitch e = 0.50 mm, and 3 copper pads plus a central exposed thermal pad (EPAD) of 13.68 × 2.20 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for APT70GR120B2?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for APT70GR120B2 (MICROCHIP, TO-247) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (3 pins) & APT70GR120B2 / APT70GR120L Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GDigital_IOSignal terminal G (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: G. Supported peripheral buses: General.
2CDigital_IOSignal terminal C (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: C. Supported peripheral buses: General.
3EDigital_IOSignal terminal E (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: E. Supported peripheral buses: General.