ChipDocs.org
⌘K
2284 PARTSUpload PDF
KP1076AWPA (ASOP-7) — Symbol, Footprint IPC-7351B & 3D STEP Model

KP1076AWPA

Kiwi InstrumentsID: C7463405ASOP-7 · 7 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · KP1076AWPA (ASOP-7)1ACIN2GND3NC4CS7ACIN6HV5DrainGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
7651234E=6.20mm · Pitch e=1.27mmD=3.90mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 6.20mm × 3.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (7/7)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ACINI/OMultiplexed I/O & Peripheral Pin ACIN (General)
2GNDGNDGround Reference Pin (GND)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4CSI/OMultiplexed I/O & Peripheral Pin CS (General)
5DrainAnalogMultiplexed I/O & Peripheral Pin Drain (General)
6HVI/OMultiplexed I/O & Peripheral Pin HV (General)
7ACINI/OMultiplexed I/O & Peripheral Pin ACIN (General)
PIN 1 ACIN
I/O
Multiplexed I/O & Peripheral Pin ACIN (General)
Design note: Signal terminal ACIN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ACIN. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Live Embedded Datasheet PDF & Technical Drawing Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
Open PDF in New Window ↗Read Datasheet PDF (.pdf)
PDF VIEWEROfficial Datasheet Document: KP1076AWPA (Kiwi Instruments · ASOP-7)
Scroll, search text (Ctrl+F), or expand directly inside the embedded PDF reader below
1. Realistic 3D PackageREPRESENTATIVE
KP1076AWPA (ASOP-7) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
KP1076AWPA (ASOP-7) - 2. Standard Pinout (Top View)
True package pinout (7 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
KP1076AWPA (ASOP-7) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
KP1076AWPA (ASOP-7) - 4. Package Dimensions (D×E×A)
ASOP-7 · 6.20×3.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
KP1076AWPA (ASOP-7) - 5. Recommended Land Pattern
IPC-7351B Footprint (7 Pads)Expand ›
6. Application SchematicSCHEMATIC
KP1076AWPA (ASOP-7) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for KP10760 / KP1076
P1 · p01_fig01EXACT PACKAGE
KP1076AWPA (ASOP-7) — 非隔离、降压型准谐振 LED 功率开关
非隔离、降压型准谐振 LED 功率开关
P2 · p02_fig01EXACT PACKAGE
KP1076AWPA (ASOP-7) — www.kiwiinst.com 2 DS_KP1076X_REV1.06_CN ©Kiwi Instruments Corp. Confidential
www.kiwiinst.com 2 DS_KP1076X_REV1.06_CN ©Kiwi Instruments Corp. Confidential
P2 · p02_fig02EXACT PACKAGE
KP1076AWPA (ASOP-7) — ASOP-7
ASOP-7
P9 · p09_fig01EXACT PACKAGE
KP1076AWPA (ASOP-7) — KP1076X 非隔离、降压型准谐振 LED 功率开关
KP1076X 非隔离、降压型准谐振 LED 功率开关
P1 · p01_fig01P1
KP1076AWPA (ASOP-7) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig02P2
KP1076AWPA (ASOP-7) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P8 · p08_fig011863×2391px
KP1076AWPA (ASOP-7) — 图 6 PCB Layout 建议
图 6 PCB Layout 建议
P8 · p08_fig01P8
KP1076AWPA (ASOP-7) — Datasheet Page 8 (p08_fig01)
Datasheet Page 8 (p08_fig01)

Technical Specifications & Part Details (KP1076AWPA)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:KP1076AWPA (ASOP-7) is a 7-pin standard electronic & interconnect component featuring a 6.20 × 3.90 × 1.65 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
7kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.20 × 3.90 × 1.65 mm (A1=0.15 mm)
Package family: SOP (ASOP-7)
Pin Count & Lead PitchN / e
7 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol7 auto-grouped pins
OK
IPC-7351B Land Pattern7 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (ASOP-7)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.20 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.65mm · e=1.27mm
Pad Size (W × L)Level B
0.51 × 1.50 mm
Pins / Total PadsTopology
7P / 7Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
ASOP-7
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — KP1076AWPA (ASOP-7)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of KP1076AWPA (ASOP-7)?

Manufactured by Kiwi Instruments, the KP1076AWPA is housed in a ASOP-7 package with 7 pins and a 1.27 mm lead pitch. Key pins include: 1 (ACIN: Multiplexed I/O & Peripheral Pin ACIN (General)), 2 (GND: Ground Reference Pin (GND)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 5 (Drain: Multiplexed I/O & Peripheral Pin Drain (General)), 6 (HV: Multiplexed I/O & Peripheral Pin HV (General)).

What are the IPC-7351B PCB Footprint dimensions for KP1076AWPA?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), KP1076AWPA (ASOP-7) has a nominal body envelope of 3.90 × 6.20 mm, pitch e = 1.27 mm, and 7 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for KP1076AWPA?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for KP1076AWPA (Kiwi Instruments, ASOP-7) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (7 pins) & KP10760 / KP1076 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ACINDigital_IOSignal terminal ACIN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ACIN. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3NCNCSignal terminal NC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4CSDigital_IOSignal terminal CS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
5DrainAnalogSignal terminal Drain (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Drain. Supported peripheral buses: General.
6HVDigital_IOSignal terminal HV (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: HV. Supported peripheral buses: General.
7ACINDigital_IOSignal terminal ACIN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ACIN. Supported peripheral buses: General.
ExplorePartsPackagesMFRsUpload