PIC18LF13K50-I/SO (SOIC-20-300mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18LF13K50-I/SO

MICROCHIPSOIC-20-300mil · 20 Pins · Pitch 1.27mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18LF13K50-I/SO (SOIC-20-300mil)1VDD2RA5/OSC1/CLK3RA4/AN3/OSC24RA3/MCLR#/VP5RC5/CCP1/P1A6RC4/P1B/C12O7NC8IO09RC7/AN9/SDO/10RB7/TX/CK20VSS19RA0/D+/PGD18RA1/D-/PGC17VUSB16IO1815IO1714IO1613RB5/AN11/RX/12RB6/SCK/SCL11RB6/SCK/SCLGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617181920E=7.50mm · Pitch e=1.27mmD=12.80mm-9-7-5-3-11357997531-1-3-5-7-9mm
3. 3D CAD MODEL
Package Body: 7.50mm × 12.80mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (20/20)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 1.8V to 5.5V)
2RA5/OSC1/CLKINI/OMultiplexed I/O & Peripheral Pin RA5/OSC1/CLKIN (RTC/CLK)
3RA4/AN3/OSC2/CLKOUTI/OMultiplexed I/O & Peripheral Pin RA4/AN3/OSC2/CLKOUT (RTC/CLK)
4RA3/MCLR#/VPPI/OMultiplexed I/O & Peripheral Pin RA3/MCLR#/VPP (General)
5RC5/CCP1/P1A/T0CKII/OMultiplexed I/O & Peripheral Pin RC5/CCP1/P1A/T0CKI (General)
6RC4/P1B/C12OUT/SRQI/OMultiplexed I/O & Peripheral Pin RC4/P1B/C12OUT/SRQ (General)
7NCNCNo Connect (Leave Floating)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9RC7/AN9/SDO/T1OSCOI/OMultiplexed I/O & Peripheral Pin RC7/AN9/SDO/T1OSCO (General)
10RB7/TX/CKI/OMultiplexed I/O & Peripheral Pin RB7/TX/CK (General)
11RB6/SCK/SCLI/OMultiplexed I/O & Peripheral Pin RB6/SCK/SCL (SPI, I2C)
12RB6/SCK/SCLI/OMultiplexed I/O & Peripheral Pin RB6/SCK/SCL (SPI, I2C)
13RB5/AN11/RX/DTI/OMultiplexed I/O & Peripheral Pin RB5/AN11/RX/DT (General)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18I/OGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17VUSBI/OMultiplexed I/O & Peripheral Pin VUSB (General)
18RA1/D-/PGCI/OMultiplexed I/O & Peripheral Pin RA1/D-/PGC (USB)
19RA0/D+/PGDI/OMultiplexed I/O & Peripheral Pin RA0/D+/PGD (USB)
20VSSGNDGround Reference Pin (VSS)
PIN 1 VDD
Power
Power Supply Input (VDD — 1.8V to 5.5V)
Design note: Primary positive power supply input (VDD) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18LF13K50-I/SO (SOIC-20-300mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18LF13K50-I/SO (SOIC-20-300mil) - 2. Standard Pinout (Top View)
True package pinout (20 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18LF13K50-I/SO (SOIC-20-300mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18LF13K50-I/SO (SOIC-20-300mil) - 4. Package Dimensions (D×E×A)
SOIC-20-300mil · 7.50×12.80mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18LF13K50-I/SO (SOIC-20-300mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (20 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18LF13K50-I/SO (SOIC-20-300mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for PIC18LF13K50 / PIC18F14K50T
P2 · p02_fig02P2
PIC18LF13K50-I/SO (SOIC-20-300mil) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P3 · p03_fig011779×2637px
PIC18LF13K50-I/SO (SOIC-20-300mil) — © 2007 Microchip Technology Inc. Advance Information DS41320A-page 3 | Trademarks | AmpLab, FilterLab, Linear Active Thermistor, Migratable Memory, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered
© 2007 Microchip Technology Inc. Advance Information DS41320A-page 3 | Trademarks | AmpLab, FilterLab, Linear Active Thermistor, Migratable Memory, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered
P3 · p03_fig02783×283px
PIC18LF13K50-I/SO (SOIC-20-300mil) — © 2007 Microchip Technology Inc. Advance Information DS41320A-page 3
© 2007 Microchip Technology Inc. Advance Information DS41320A-page 3
P2 · p02_fig01All Packages in PDF
PIC18LF13K50-I/SO (SOIC-20-300mil) — FIGURE 2: PIC18F1XK50 20-PIN QFN
FIGURE 2: PIC18F1XK50 20-PIN QFN
P2 · p02_fig02All Packages in PDF
PIC18LF13K50-I/SO (SOIC-20-300mil) — FIGURE 2: PIC18F1XK50 20-PIN QFN
FIGURE 2: PIC18F1XK50 20-PIN QFN
P398 · p398_fig01All Packages in PDF
PIC18LF13K50-I/SO (SOIC-20-300mil) — PIC18(L)F1XK50 [SSOP-20-208mil]
PIC18(L)F1XK50 [SSOP-20-208mil]

Technical Specifications & Part Details (PIC18LF13K50-I/SO)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18LF13K50-I/SO (SOIC-20-300mil) is a 20-pin standard electronic & interconnect component featuring a 12.80 × 7.50 × 2.70 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V to 5.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated USB, UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
48 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
12.80 × 7.50 × 2.70 mm (A1=0.20 mm)
Package family: SOIC (SOIC-20-300mil)
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol20 auto-grouped pins
OK
IPC-7351B Land Pattern20 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18LF13K50 / PIC18F14K50T (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOIC-20-300mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
12.80 × 7.50 mm
Height (A) & Pitch (e)IPC-7351B
A=2.70mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.90 mm
Pins / Total PadsTopology
20P / 20Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-20-300mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18LF13K50-I/SO (SOIC-20-300mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18LF13K50-I/SO (SOIC-20-300mil)?

Manufactured by MICROCHIP, the PIC18LF13K50-I/SO is housed in a SOIC-20-300mil package with 20 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 1.8V to 5.5V)), 2 (RA5/OSC1/CLKIN: Multiplexed I/O & Peripheral Pin RA5/OSC1/CLKIN (RTC/CLK)), 3 (RA4/AN3/OSC2/CLKOUT: Multiplexed I/O & Peripheral Pin RA4/AN3/OSC2/CLKOUT (RTC/CLK)), 4 (RA3/MCLR#/VPP: Multiplexed I/O & Peripheral Pin RA3/MCLR#/VPP (General)), 5 (RC5/CCP1/P1A/T0CKI: Multiplexed I/O & Peripheral Pin RC5/CCP1/P1A/T0CKI (General)), 6 (RC4/P1B/C12OUT/SRQ: Multiplexed I/O & Peripheral Pin RC4/P1B/C12OUT/SRQ (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC18LF13K50-I/SO?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF13K50-I/SO (SOIC-20-300mil) has a nominal body envelope of 7.50 × 12.80 mm, pitch e = 1.27 mm, and 20 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF13K50-I/SO?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF13K50-I/SO (MICROCHIP, SOIC-20-300mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (20 pins) & PIC18LF13K50 / PIC18F14K50T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
2RA5/OSC1/CLKINDigital_IOSignal terminal RA5/OSC1/CLKIN (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA5/OSC1/CLKIN. Supported peripheral buses: RTC/CLK.
3RA4/AN3/OSC2/CLKOUTDigital_IOSignal terminal RA4/AN3/OSC2/CLKOUT (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA4/AN3/OSC2/CLKOUT. Supported peripheral buses: RTC/CLK.
4RA3/MCLR#/VPPDigital_IOSignal terminal RA3/MCLR#/VPP (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA3/MCLR#/VPP. Supported peripheral buses: General.
5RC5/CCP1/P1A/T0CKIDigital_IOSignal terminal RC5/CCP1/P1A/T0CKI (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC5/CCP1/P1A/T0CKI. Supported peripheral buses: General.
6RC4/P1B/C12OUT/SRQDigital_IOSignal terminal RC4/P1B/C12OUT/SRQ (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC4/P1B/C12OUT/SRQ. Supported peripheral buses: General.
7NCNo_ConnectNo Connect (Leave Floating)
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9RC7/AN9/SDO/T1OSCODigital_IOSignal terminal RC7/AN9/SDO/T1OSCO (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC7/AN9/SDO/T1OSCO. Supported peripheral buses: General.
10RB7/TX/CKDigital_IOSignal terminal RB7/TX/CK (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB7/TX/CK. Supported peripheral buses: General.
11RB6/SCK/SCLDigital_IOSignal terminal RB6/SCK/SCL (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB6/SCK/SCL. Supported peripheral buses: SPI, I2C.
12RB6/SCK/SCLDigital_IOSignal terminal RB6/SCK/SCL (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB6/SCK/SCL. Supported peripheral buses: SPI, I2C.
13RB5/AN11/RX/DTDigital_IOSignal terminal RB5/AN11/RX/DT (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB5/AN11/RX/DT. Supported peripheral buses: General.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18Digital_IOGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17VUSBDigital_IOSignal terminal VUSB (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: VUSB. Supported peripheral buses: General.
18RA1/D-/PGCDigital_IOSignal terminal RA1/D-/PGC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA1/D-/PGC. Supported peripheral buses: USB.
19RA0/D+/PGDDigital_IOSignal terminal RA0/D+/PGD (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA0/D+/PGD. Supported peripheral buses: USB.
20VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.