MX575ABD100M000 (SMD7050-6P) — Symbol, Footprint IPC-7351B & 3D STEP Model

MX575ABD100M000

MICROCHIPSMD7050-6P · 6 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MX575ABD100M000 (SMD7050-6P)1OE2DNC3GND6VDD5Q, /Q4Q, /QGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123456E=7.00mm · Pitch e=2.54mmD=5.00mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 7.00mm × 5.00mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OEI/OMultiplexed I/O & Peripheral Pin OE (General)
2DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
3GNDGNDGround Reference Pin (GND)
4Q, /QI/OMultiplexed I/O & Peripheral Pin Q, /Q (General)
5Q, /QI/OMultiplexed I/O & Peripheral Pin Q, /Q (General)
6VDDPowerPower Supply Input (VDD — 3.3V / 5.0V Standard Logic)
PIN 1 OE
I/O
Multiplexed I/O & Peripheral Pin OE (General)
Design note: Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up (Internal)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MX575ABD100M000 (SMD7050-6P) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MX575ABD100M000 (SMD7050-6P) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MX575ABD100M000 (SMD7050-6P) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MX575ABD100M000 (SMD7050-6P) - 4. Package Dimensions (D×E×A)
SMD7050-6P · 7.00×5.00mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
MX575ABD100M000 (SMD7050-6P) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
MX575ABD100M000 (SMD7050-6P) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MX575
P5 · p05_fig01EXACT PACKAGE
MX575ABD100M000 (SMD7050-6P) — 6-Pin LGA (7x5mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com.
6-Pin LGA (7x5mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com.
P1 · p01_fig01470×236px
MX575ABD100M000 (SMD7050-6P) — General Description
General Description
P2 · p02_fig01795×507px
MX575ABD100M000 (SMD7050-6P) — Pin Configuration
Pin Configuration
P2 · p02_fig01P2
MX575ABD100M000 (SMD7050-6P) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig011625×1085px
MX575ABD100M000 (SMD7050-6P) — Figure 1. HCSL Output 100MHz 1MHz-20MHz 109fs
Figure 1. HCSL Output 100MHz 1MHz-20MHz 109fs
P3 · p03_fig021625×1085px
MX575ABD100M000 (SMD7050-6P) — Figure 2. HCSL Output 100MHz 12kHz-20MHz 135fs
Figure 2. HCSL Output 100MHz 12kHz-20MHz 135fs
P4 · p04_fig011625×1085px
MX575ABD100M000 (SMD7050-6P) — Figure 1. HCSL Output 100MHz 100kHz-20MHz 131fs
Figure 1. HCSL Output 100MHz 100kHz-20MHz 131fs
P4 · p04_fig01P4
MX575ABD100M000 (SMD7050-6P) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P5 · p05_fig01P5
MX575ABD100M000 (SMD7050-6P) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)

Technical Specifications & Part Details (MX575ABD100M000)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MX575ABD100M000 (SMD7050-6P) is a 6-pin standard electronic & interconnect component featuring a 7.00 × 5.00 × 1.20 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +85°C with integrated ADC, DAC interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
7.00 × 5.00 × 1.20 mm (A1=0.02 mm)
Package family: OTHER (SMD7050-6P)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
ADC, DAC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MX575 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SMD7050-6P)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
7.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=2.54mm
Pad Size (W × L)Level B
1.20 × 1.60 mm
Pins / Total PadsTopology
6P / 6Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SMD7050-6P
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MX575ABD100M000 (SMD7050-6P)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MX575ABD100M000 (SMD7050-6P)?

Manufactured by MICROCHIP, the MX575ABD100M000 is housed in a SMD7050-6P package with 6 pins and a 2.54 mm lead pitch. Key pins include: 1 (OE: Multiplexed I/O & Peripheral Pin OE (General)), 2 (DNC: Multiplexed I/O & Peripheral Pin DNC (General)), 3 (GND: Ground Reference Pin (GND)), 4 (Q, /Q: Multiplexed I/O & Peripheral Pin Q, /Q (General)), 5 (Q, /Q: Multiplexed I/O & Peripheral Pin Q, /Q (General)), 6 (VDD: Power Supply Input (VDD — 3.3V / 5.0V Standard Logic)).

What are the IPC-7351B PCB Footprint dimensions for MX575ABD100M000?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MX575ABD100M000 (SMD7050-6P) has a nominal body envelope of 5.00 × 7.00 mm, pitch e = 2.54 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MX575ABD100M000?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MX575ABD100M000 (MICROCHIP, SMD7050-6P) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & MX575 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OEDigital_IOSignal terminal OE (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OE. Supported peripheral buses: General.
2DNCNCSignal terminal DNC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4Q, /QDigital_IOSignal terminal Q, /Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q, /Q. Supported peripheral buses: General.
5Q, /QDigital_IOSignal terminal Q, /Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Q, /Q. Supported peripheral buses: General.
6VDDPower_InPrimary positive power supply input (VDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).