PIC18LF26J53-I/SS (SSOP-28-208mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18LF26J53-I/SS

MICROCHIPSSOP-28-208mil · 28 Pins · Pitch 0.65mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18LF26J53-I/SS (SSOP-28-208mil)1MCLR#2IO23RA1/AN1/C2IN4NC5RA3/AN3/C1IN6VDDCORE/VCAP7NC8VSS19OSC1/CLKI/RA10OSC2/CLKO/RA11RC0/T1OSO/T112IO713IO1514VUSB28RB7/CCP7/KBI27RB6/CCP6/KBI26IO2125IO1424IO1323IO1222IO1121IO1020VDD19VSS218IO1917RC6/CCP9/TX116RC5/D+/VP15RC4/D-/VMGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.822.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9mm
2. 2D FOOTPRINT
12345678910111213141516171819202122232425262728E=5.30mm · Pitch e=0.65mmD=10.20mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 5.30mm × 10.20mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (28/28)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
2IO2I/OGeneral Purpose Digital I/O Pin IO2
3RA1/AN1/C2INA/VBG/RP1I/OMultiplexed I/O & Peripheral Pin RA1/AN1/C2INA/VBG/RP1 (General)
4NCNCNo Connect (Leave Floating)
5RA3/AN3/C1INB/VREF+AnalogMultiplexed I/O & Peripheral Pin RA3/AN3/C1INB/VREF+ (General)
6VDDCORE/VCAPPowerPower Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)
7NCNCNo Connect (Leave Floating)
8VSS1GNDGround Reference Pin (VSS1)
9OSC1/CLKI/RA7I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)
10OSC2/CLKO/RA6I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/RA6 (RTC/CLK)
11RC0/T1OSO/T1CKI/RP11I/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T1CKI/RP11 (General)
12IO7I/OGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13IO15I/OGPIO15 / RTC_GPIO15 / U0RTS / ADC2_CH4 / XTAL_32K_P
14VUSBI/OMultiplexed I/O & Peripheral Pin VUSB (General)
15RC4/D-/VMI/OMultiplexed I/O & Peripheral Pin RC4/D-/VM (USB)
16RC5/D+/VPI/OMultiplexed I/O & Peripheral Pin RC5/D+/VP (USB)
17RC6/CCP9/TX1/CK1/RP17I/OMultiplexed I/O & Peripheral Pin RC6/CCP9/TX1/CK1/RP17 (General)
18IO19I/OGPIO19 / RTC_GPIO19 / USB_D- / U1RTS / ADC2_CH8
19VSS2GNDGround Reference Pin (VSS2)
20VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
21IO10I/OGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22IO11I/OGPIO11 / RTC_GPIO11 / TOUCH11 / ADC2_CH0 / FSPID
23IO12I/OGPIO12 / RTC_GPIO12 / TOUCH12 / ADC2_CH1 / FSPICLK
24IO13I/OGPIO13 / RTC_GPIO13 / TOUCH13 / ADC2_CH2 / FSPIQ
25IO14I/OGPIO14 / RTC_GPIO14 / TOUCH14 / ADC2_CH3 / FSPIWP
26IO21I/OGPIO21 / RTC_GPIO21
27RB6/CCP6/KBI2/PGC/RP9I/OMultiplexed I/O & Peripheral Pin RB6/CCP6/KBI2/PGC/RP9 (General)
28RB7/CCP7/KBI3/PGD/RP10I/OMultiplexed I/O & Peripheral Pin RB7/CCP7/KBI3/PGD/RP10 (General)
PIN 1 MCLR#
I/O
Multiplexed I/O & Peripheral Pin MCLR# (General)
Design note: Signal terminal MCLR# (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18LF26J53-I/SS (SSOP-28-208mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18LF26J53-I/SS (SSOP-28-208mil) - 2. Standard Pinout (Top View)
True package pinout (28 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18LF26J53-I/SS (SSOP-28-208mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18LF26J53-I/SS (SSOP-28-208mil) - 4. Package Dimensions (D×E×A)
SSOP-28-208mil · 5.30×10.20mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18LF26J53-I/SS (SSOP-28-208mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (28 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18LF26J53-I/SS (SSOP-28-208mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for PIC18LF26J53
P1 · p01_fig01377×200px
PIC18LF26J53-I/SS (SSOP-28-208mil) — 28/44-Pin, High-Performance USB MCUs with XLP Technology
28/44-Pin, High-Performance USB MCUs with XLP Technology
P28 · p28_fig01867×940px
PIC18LF26J53-I/SS (SSOP-28-208mil) — FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
P208 · p208_fig01867×768px
PIC18LF26J53-I/SS (SSOP-28-208mil) — FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
P208 · p208_fig01P208
PIC18LF26J53-I/SS (SSOP-28-208mil) — Datasheet Page 208 (p208_fig01)
Datasheet Page 208 (p208_fig01)
P254 · p254_fig011401×885px
PIC18LF26J53-I/SS (SSOP-28-208mil) — FIGURE 18-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 18-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P288 · p288_fig011777×994px
PIC18LF26J53-I/SS (SSOP-28-208mil) — FIGURE 20-2: SPI MASTER/SLAVE CONNECTION
FIGURE 20-2: SPI MASTER/SLAVE CONNECTION
P424 · p424_fig01978×670px
PIC18LF26J53-I/SS (SSOP-28-208mil) — FIGURE 27-3: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR TIME MEASUREMENT
FIGURE 27-3: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR TIME MEASUREMENT
P425 · p425_fig011029×666px
PIC18LF26J53-I/SS (SSOP-28-208mil) — FIGURE 27-4: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR PULSE DELAY GENERATION
FIGURE 27-4: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR PULSE DELAY GENERATION
P425 · p425_fig01P425
PIC18LF26J53-I/SS (SSOP-28-208mil) — Datasheet Page 425 (p425_fig01)
Datasheet Page 425 (p425_fig01)
P542 · p542_fig011538×1615px
PIC18LF26J53-I/SS (SSOP-28-208mil) — 32.0 PACKAGING INFORMATION 32.1 Package Marking Information
32.0 PACKAGING INFORMATION 32.1 Package Marking Information
P542 · p542_fig021777×684px
PIC18LF26J53-I/SS (SSOP-28-208mil) — DS30009964C-page 542  2009-2016 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for cust
DS30009964C-page 542  2009-2016 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for cust
P542 · p542_fig02P542
PIC18LF26J53-I/SS (SSOP-28-208mil) — Datasheet Page 542 (p542_fig02)
Datasheet Page 542 (p542_fig02)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (PIC18LF26J53-I/SS)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18LF26J53-I/SS (SSOP-28-208mil) is a 28-pin standard electronic & interconnect component featuring a 10.20 × 5.30 × 2.00 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.0V to 3.6V supply operation across -10°C to +70°C with integrated USB, UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-10°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.20 × 5.30 × 2.00 mm (A1=0.15 mm)
Package family: TSSOP (SSOP-28-208mil)
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol28 auto-grouped pins
OK
IPC-7351B Land Pattern28 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SSOP-28-208mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.20 × 5.30 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.60 mm
Pins / Total PadsTopology
28P / 28Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SSOP-28-208mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18LF26J53-I/SS (SSOP-28-208mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18LF26J53-I/SS (SSOP-28-208mil)?

Manufactured by MICROCHIP, the PIC18LF26J53-I/SS is housed in a SSOP-28-208mil package with 28 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (MCLR#: Multiplexed I/O & Peripheral Pin MCLR# (General)), 2 (IO2: General Purpose Digital I/O Pin IO2), 3 (RA1/AN1/C2INA/VBG/RP1: Multiplexed I/O & Peripheral Pin RA1/AN1/C2INA/VBG/RP1 (General)), 4 (NC: No Connect (Leave Floating)), 5 (RA3/AN3/C1INB/VREF+: Multiplexed I/O & Peripheral Pin RA3/AN3/C1INB/VREF+ (General)), 6 (VDDCORE/VCAP: Power Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)).

What are the IPC-7351B PCB Footprint dimensions for PIC18LF26J53-I/SS?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF26J53-I/SS (SSOP-28-208mil) has a nominal body envelope of 5.30 × 10.20 mm, pitch e = 0.65 mm, and 28 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF26J53-I/SS?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF26J53-I/SS (MICROCHIP, SSOP-28-208mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (28 pins) & PIC18LF26J53 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1MCLR#Digital_IOSignal terminal MCLR# (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
2IO2Digital_IOGeneral Purpose Digital I/O Pin IO2
3RA1/AN1/C2INA/VBG/RP1Digital_IOSignal terminal RA1/AN1/C2INA/VBG/RP1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA1/AN1/C2INA/VBG/RP1. Supported peripheral buses: General.
4NCNo_ConnectNo Connect (Leave Floating)
5RA3/AN3/C1INB/VREF+AnalogSignal terminal RA3/AN3/C1INB/VREF+ (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: RA3/AN3/C1INB/VREF+. Supported peripheral buses: General.
6VDDCORE/VCAPPower_InPrimary positive power supply input (VDDCORE/VCAP) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
7NCNo_ConnectNo Connect (Leave Floating)
8VSS1GND0V electrical ground return terminal (VSS1) for internal core logic, I/O drivers, and analog sub-blocks.
9OSC1/CLKI/RA7Digital_IOSignal terminal OSC1/CLKI/RA7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSC1/CLKI/RA7. Supported peripheral buses: RTC/CLK.
10OSC2/CLKO/RA6Digital_IOSignal terminal OSC2/CLKO/RA6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSC2/CLKO/RA6. Supported peripheral buses: RTC/CLK.
11RC0/T1OSO/T1CKI/RP11Digital_IOSignal terminal RC0/T1OSO/T1CKI/RP11 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC0/T1OSO/T1CKI/RP11. Supported peripheral buses: General.
12IO7Digital_IOGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13IO15Digital_IOGPIO15 / RTC_GPIO15 / U0RTS / ADC2_CH4 / XTAL_32K_P
14VUSBDigital_IOSignal terminal VUSB (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: VUSB. Supported peripheral buses: General.
15RC4/D-/VMDigital_IOSignal terminal RC4/D-/VM (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC4/D-/VM. Supported peripheral buses: USB.
16RC5/D+/VPDigital_IOSignal terminal RC5/D+/VP (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC5/D+/VP. Supported peripheral buses: USB.
17RC6/CCP9/TX1/CK1/RP17Digital_IOSignal terminal RC6/CCP9/TX1/CK1/RP17 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC6/CCP9/TX1/CK1/RP17. Supported peripheral buses: General.
18IO19Digital_IOGPIO19 / RTC_GPIO19 / USB_D- / U1RTS / ADC2_CH8
19VSS2GND0V electrical ground return terminal (VSS2) for internal core logic, I/O drivers, and analog sub-blocks.
20VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
21IO10Digital_IOGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22IO11Digital_IOGPIO11 / RTC_GPIO11 / TOUCH11 / ADC2_CH0 / FSPID
23IO12Digital_IOGPIO12 / RTC_GPIO12 / TOUCH12 / ADC2_CH1 / FSPICLK
24IO13Digital_IOGPIO13 / RTC_GPIO13 / TOUCH13 / ADC2_CH2 / FSPIQ
25IO14Digital_IOGPIO14 / RTC_GPIO14 / TOUCH14 / ADC2_CH3 / FSPIWP
26IO21Digital_IOGPIO21 / RTC_GPIO21
27RB6/CCP6/KBI2/PGC/RP9Digital_IOSignal terminal RB6/CCP6/KBI2/PGC/RP9 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB6/CCP6/KBI2/PGC/RP9. Supported peripheral buses: General.
28RB7/CCP7/KBI3/PGD/RP10Digital_IOSignal terminal RB7/CCP7/KBI3/PGD/RP10 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB7/CCP7/KBI3/PGD/RP10. Supported peripheral buses: General.