MIC2954-03WT (TO-220-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2954-03WT

MICROCHIPTO-220-3 · 3 Pins · Pitch 0.50mmPDF MECHANICAL ONLY5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2954-03WT (TO-220-3)1IN2GND3OUTGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
231E=10.20mm · Pitch e=0.50mmD=4.50mm-7-5-3-11357531-1-3-5mm
3. 3D CAD MODEL
Package Body: 10.20mm × 4.50mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (3/3)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1INI/OMultiplexed I/O & Peripheral Pin IN (General)
2GNDGNDGround Reference Pin (GND)
3OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
PIN 1 IN
I/O
Multiplexed I/O & Peripheral Pin IN (General)
Design note: Signal terminal IN (I/O, 1.24V to 29V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2954-03WT (TO-220-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2954-03WT (TO-220-3) - 2. Standard Pinout (Top View)
True package pinout (3 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2954-03WT (TO-220-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2954-03WT (TO-220-3) - 4. Package Dimensions (D×E×A)
TO-220-3 · 10.20×4.50mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2954-03WT (TO-220-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (3 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2954-03WT (TO-220-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MIC2954
P2 · p02_fig01939×492px
MIC2954-03WT (TO-220-3) — 5V Fixed Regulator Adjustable Regulator
5V Fixed Regulator Adjustable Regulator
P2 · p02_fig02523×339px
MIC2954-03WT (TO-220-3) — 5V Fixed Regulator Adjustable Regulator
5V Fixed Regulator Adjustable Regulator
P2 · p02_fig031875×520px
MIC2954-03WT (TO-220-3) — 5V or 3V Selectable Regulator with Shutdown Wide Input-Voltage-Range Current Limiter
5V or 3V Selectable Regulator with Shutdown Wide Input-Voltage-Range Current Limiter
P2 · p02_fig01P2
MIC2954-03WT (TO-220-3) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig01P3
MIC2954-03WT (TO-220-3) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P11 · p11_fig01785×545px
MIC2954-03WT (TO-220-3) — Figure 1. /Error Output Timing
Figure 1. /Error Output Timing
P11 · p11_fig02875×684px
MIC2954-03WT (TO-220-3) — Figure 1. /Error Output Timing
Figure 1. /Error Output Timing
P11 · p11_fig02P11
MIC2954-03WT (TO-220-3) — Datasheet Page 11 (p11_fig02)
Datasheet Page 11 (p11_fig02)
P3 · p03_fig01All Packages in PDF
MIC2954-03WT (TO-220-3) — 3-Pin TO-92 (Z) 3-Pin TO-220 (T) Pin Description
3-Pin TO-92 (Z) 3-Pin TO-220 (T) Pin Description
P13 · p13_fig01All Packages in PDF
MIC2954-03WT (TO-220-3) — September 2007 13 M9999-090607
September 2007 13 M9999-090607

Technical Specifications & Part Details (MIC2954-03WT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2954-03WT (TO-220-3) is a 2-pin standard electronic & interconnect component featuring a 10.20 × 4.50 × 2.00 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 1.24V to 29V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.24V to 29V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
120µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.20 × 4.50 × 2.00 mm (A1=0.02 mm)
Package family: OTHER (TO-220-3)
Pin Count & Lead PitchN / e
2 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol3 auto-grouped pins
OK
IPC-7351B Land Pattern3 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TO-220-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.20 × 4.50 mm
Height (A) & Pitch (e)IPC-7351B
A=2.00mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
3P / 3Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-220-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2954-03WT (TO-220-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2954-03WT (TO-220-3)?

Manufactured by MICROCHIP, the MIC2954-03WT is housed in a TO-220-3 package with 3 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.24V to 29V. Key pins include: 1 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 2 (GND: Ground Reference Pin (GND)), 3 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC2954-03WT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2954-03WT (TO-220-3) has a nominal body envelope of 4.50 × 10.20 mm, pitch e = 0.50 mm, and 3 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2954-03WT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2954-03WT (MICROCHIP, TO-220-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (3 pins) & MIC2954 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1INDigital_IOSignal terminal IN (I/O, 1.24V to 29V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3OUTDigital_IOSignal terminal OUT (I/O, 1.24V to 29V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.